-
Buy in Bulk & Save
25-49 50+ £27.32£32.78 £25.88£31.06 
18mm Formwork Plywood Poplar Core Film Faced Both Sides 2440 x 1220mm (8′ x 4′) FSC®
18mm Film-faced plywood is also called formwork plywood, concrete form. 18mm Film faced plywood is the special plywood with two sides coated with a wearable and waterproof film. The film is adhesive impregnated paper. This plywood is also known as Black plywood. The function of the film is to protect the inside wood from moisture, water, weather and extend the plywood’s service life. 18mm Film faced plywood can be used in the harsh and outside environment: formwork plywood, concrete formwork, floorboard, vehicle building.
£28.76£34.51 Ex VATInc VAT Add to cart
Our specialist stores
Our specialist stores
Formwork Plywood
On a proper building site, materials either cope or they get replaced. Formwork plywood is chosen by contractors who do not have time for movement, swelling or surface failure. It is the sheet that takes pressure, moisture and repetition without drama. It feels solid when lifted. It behaves predictably when fixed.
What is formwork plywood?
Formwork plywood is a high density structural sheet built to stay stable when moisture, pressure and repetition are part of the job. It is manufactured from layered timber veneers pressed tightly together. That internal construction is what helps the board resist twisting, softening and uneven movement when site conditions change.
The surface is finished in a dark brown film or pressed paper overlay. You see it immediately on the sheet. Smooth, sealed, practical. Overlay weights vary by specification, including 180g film on one face with 120g on the reverse, 220g overlay options, and heavier 370g per square metre grades where increased durability is required. The finish is not there for appearance. It protects the timber core and maintains surface integrity through repeated handling.
Thickness options typically include 17.5mm, 18mm and 21mm. Standard UK sheet sizes are 2440mm x 1220mm and the larger 2500mm x 1250mm format. Edges are supplied square to allow accurate alignment and straightforward fixing on site.
Core composition depends on the variant. Eucalyptus provides density and structural strength. Poplar core options offer a lighter handling weight while maintaining stability. Many boards are produced in line with BS EN636 Class 2 requirements and may carry CE2+ or CE4 structural grading, depending on the manufacturer and sheet. Moisture resistant variants are available, and panels are rated for exterior exposure when correctly treated and sealed.
Low E1 formaldehyde levels are standard across most options. FSC-certified options are available where marked. What remains consistent across the range is a dense build, a controlled face finish and a panel designed to perform reliably over repeated cycles.
What is formwork plywood used for?
In practice, formwork plywood is most closely associated with concrete work. It is used to create controlled moulds for ground beams, foundation slabs and retaining walls where surface finish and dimensional accuracy matter. Contractors rely on it for column boxing, shuttering for lift shafts and stair cores, and slab edge formers that need to stay true while concrete is still fluid and under pressure.
It is equally common on suspended slabs and reinforced concrete decks, where sheets are fixed into temporary systems to support wet concrete until curing is complete. For bridge abutments, pile caps and ring beams, the smooth film face helps produce a cleaner concrete finish with less surface marking.
Beyond vertical and horizontal pours, the board is frequently used for step units, concrete seating tiers, parapet walls and bespoke form shapes where precision cutting is required. Square edges support tight joins, helping reduce grout leakage and maintain consistent lines.
Outside of direct casting work, the same sheet is often used for temporary site platforms and working decks. It forms protective walkways over reinforcement, stable bases beneath equipment, and clean working surfaces for layout and measuring. In refurbishment projects, it is used to shield finished floors and staircases from heavy traffic before handover.
On busy sites, it also appears as temporary hoarding panels, containment screens and protective linings inside site cabins or transport vehicles. The dense core and sealed surface make it practical where moisture and abrasion are unavoidable.
Types of formwork ply
Not all formwork ply is identical. The differences sit in the surface finish, core composition, overlay weight and thickness. Choosing the right specification depends on how many cycles you expect and the level of surface performance required.
Film faced both sides panels are the most common option. Both faces are sealed with a phenolic film, creating a smooth, hard-wearing surface designed for repeat pours and controlled concrete finish.
MDO variants, often finished with paper on one side and film on the other, offer a slightly different surface behaviour. The front MDO layer ensures an even finish, and the film backing helps the panel resist moisture and stay stable.
Benefits of formwork plywood
- High load capacity during concrete pours.
- Resistant to surface wear and site handling.
- Suitable for repeated use when correctly maintained.
- Stable core construction reduces warping.
- Available in multiple overlay weights for durability control.
- Exterior rated options when properly treated.
- Consistent thickness across the sheet.
- Compatible with standard UK shuttering systems.
- Reduced grout leakage with tight joins.
Why choose our formwork ply?
Because on-site, price matters. But performance matters more. At Sheet Materials Wholesale, we focus on both. You get a competitive price without cutting corners on specification. Just clear data and boards that match what is listed.
We stock real, project-ready sheets in the UK stock. That means no long uncertainty around availability. If it is listed, it is there. If you need clarity, you get a fast quote.
Contractors buying in pallet quantities benefit from volume discounts that make sense at scale. The more consistent your ordering, the better the structure works for you.
You can order products online quickly, without back and forth paperwork. A VAT invoice is provided as standard. Order tracking included. Clear documentation for regulated projects when required.
Delivery is not an afterthought. We offer fast nationwide delivery across the UK, whether it is a site or residential delivery. Materials arrive when they are expected, not “sometime next week”.
Most importantly, we understand the difference between a decorative sheet and a structural panel. Our team works with contractors, civil projects and refurbishment teams daily. That experience shapes what we stock and how we price it.
At Sheet Materials Wholesale, you can purchase Formwork Plywood at low wholesale prices with fast nationwide delivery for most of items within 1-3 working days across the UK. Next-day delivery is also available on most orders. Competitive rates guaranteed.
FAQ
Where to buy formwork plywood in the UK?
You can buy it directly from Sheet Materials Wholesale. We keep stock in standard sizes and thicknesses, and you can order online or call us if you want to check availability first.
How much is formwork plywood?
Formwork plywood price usually starts from around £28 +VAT. Check directly on our website as it updates regularly.
Is formwork ply waterproof?
It is moisture resistant, especially the film faced variants. Edges should always be sealed properly if the board is exposed to wet conditions for extended periods.
Can formwork plywood be reused?
Yes, it can be reused multiple times if handled and cleaned correctly. Heavier overlay grades tend to last longer under repeat pours.
