






















| 25-49 | 50+ |
| £32.70£39.24 | £32.02£38.42 |
Available in 3-5 daysThis 1.5mm 5×5 Finnish birch plywood bends and flexes without losing strength, with a clean, joint-free veneer face that looks great left natural or finished with lacquer, wax or stain. It’s a favourite for laser and CNC cutting, models, instruments, lamps and anything that needs a light but sturdy panel. Made in Finland with ultra-low formaldehyde emissions (ULEF certified).
| 25-49 | 50+ |
| £21.19£25.43 | £20.76£24.91 |
Available in 3-5 daysThis 1.5mm 4×4 Finnish birch plywood bends and flexes without losing strength, with a clean, joint-free veneer face that looks great left natural or finished with lacquer, wax or stain. It’s a favourite for laser and CNC cutting, models, instruments, lamps and anything that needs a light but sturdy panel. Made in Finland with ultra-low formaldehyde emissions (ULEF certified).
| 25-49 | 50+ |
| £28.37£34.04 | £27.79£33.35 |
Available in 3-5 daysThis 0.8mm 4×4 Finnish birch plywood bends and flexes without losing strength, with a clean, joint-free veneer face that looks great left natural or finished with lacquer, wax or stain. It’s a favourite for laser and CNC cutting, models, instruments, lamps and anything that needs a light but sturdy panel. Made in Finland with ultra-low formaldehyde emissions (ULEF certified).
This 1.5mm 8×4 Finnish birch plywood bends and flexes without losing strength, with a clean, joint-free veneer face that looks great left natural or finished with lacquer, wax or stain. It’s a favourite for laser and CNC cutting, models, instruments, lamps and anything that needs a light but sturdy panel. Made in Finland with ultra-low formaldehyde emissions (ULEF certified).
| 50-99 | 100+ |
| £15.83£19.00 | £14.95£17.94 |





A 3mm cross-grain design means that the grain pattern goes across the sheet, and the short edge of the sheet bends to join with the short edge. This flexible plywood panel is commonly called bendy plywood or flexibly, and is used extensively in furniture and shopfitting, wherever curves are desirable, thus demanding a panel that is extremely flexible.
| 50-99 | 100+ |
| £16.01£19.21 | £14.95£17.94 |





This flexible 3mm plywood panel is commonly called bendy plywood or flexibly, and is used extensively in furniture and shopfitting, wherever curves are desirable, thus demanding a panel that is extremely flexible.
This 3mm 5×5 Birch plywood is often referred to as laser ply. It is often used for curved work, laminating layers, drawer bottoms, cabinet backs and laser/CNC projects. It is super light and easy to cut. For interior use only.
| 25-49 | 50+ |
| £63.00£75.60 | £61.70£74.04 |
Available in 3-5 daysThis 3mm 5×5 Finnish birch plywood bends and flexes without losing strength, with a clean, joint-free veneer face that looks great left natural or finished with lacquer, wax or stain. It’s a favourite for laser and CNC cutting, models, instruments, lamps and anything that needs a light but sturdy panel. Made in Finland with ultra-low formaldehyde emissions (ULEF certified).
3.6mm Hardwood Eucalyptus faced structural plywood is used in permanent structures where the board is likely to be used in humid or interior conditions. This high-grade structural panel is less prone to bending and twisting and, with its excellent strength to weight ratio, makes it versatile and easy to handle.
3.6mm Hardwood faced structural plywood is used in permanent structures where the board is likely to be used in humid or interior conditions.
This high-grade structural panel is less prone to bending and twisting and, with its excellent strength to weight ratio, makes it versatile and easy to handle.
3.6mm COMBI is short for combination. Combi core is a mixture of poplar veneer and eucalyptus veneer. The combi plywood is a balance between poplar plywood and eucalyptus plywood.
3.6mm Our Malaysian structural plywood provides homeowners and merchants with a superior solution for interior and exterior applications using the highest quality tropical species. The veneers of Malaysian plywood are generally thicker than those of other plywood. The veneers of Malaysian plywood are generally thicker than those of other plywood. Remember to seal the sheets before using them externally ( i.e. exposed to weather conditions).
| 25-49 | 50+ |
| £34.96£41.95 | £33.12£39.74 |





Oak poplar plywood 3.6mm glued to the wood surface increases the beauty and charm of the furniture that no other decorative panels can. This is a much stronger and more durable version of the veneered board.
3.6mm Hardwood faced structural plywood is used in permanent structures where the board is likely to be used in humid or interior conditions.
This high-grade structural panel is less prone to bending and twisting and, with its excellent strength to weight ratio, makes it versatile and easy to handle.
3.6mm Chinese Eucalyptus Hardwood Plywood is a structural plywood that provides homeowners and merchants with a superior solution for interior and exterior applications using the highest quality species. Remember to seal the sheets before using them externally (i.e. exposed to weather conditions).
4mm Birch plywood is made from only Birch veneers. Inner veneers are thicker than outer veneers, glued and laid up in alternating directions to the required thickness. It thus provides a superbly consistent strong panel with known engineering characteristics.
This 4mm 5×5 Birch plywood is often referred to as laser ply. It is often used for curved work, laminating layers, drawer bottoms, cabinet backs and laser/CNC projects. It is super light and easy to cut. For interior use only.
4mm Garnica lightweight plywood panel manufactured from 100% European sustainable poplar. Exceptionally smooth, pale ivory surface ideal for painting, laminating, and interior fit-out.
4mm Birch Short Grain Wisa plywood is made from only 4mm Birch veneers of the same thickness, glued and laid up in alternating directions to the required thickness. It thus provides a superbly consistent strong panel with known engineering characteristics.
| 90-179 | 180+ |
| £21.17£25.40 | £20.05£24.06 |





5mm A cross-grain design means that the grain pattern goes across the sheet, and the short edge of the sheet bends to join with the short edge. This flexible plywood panel is commonly called bendy plywood or flexibly, and is used extensively in furniture and shopfitting, wherever curves are desirable, thus demanding a panel that is extremely flexible.
| 90-179 | 180+ |
| £20.96£25.15 | £19.85£23.82 |





5mm This flexible plywood panel is commonly called bendy plywood or flexibly, and is used extensively in furniture and shopfitting, wherever curves are desirable, thus demanding a panel that is extremely flexible.
5.5mm Hardwood Eucalyptus faced structural plywood is used in permanent structures where the board is likely to be used in humid or interior conditions. This high-grade structural panel is less prone to bending and twisting and, with its excellent strength to weight ratio, makes it versatile and easy to handle.
| 55-109 | 110+ |
| £19.53£23.44 | £18.98£22.78 |





5.5mm Hardwood faced structural plywood is used in permanent structures where the board is likely to be used in humid or interior conditions. This high-grade structural panel is less prone to bending and twisting and, with its excellent strength to weight ratio, makes it versatile and easy to handle.
5.5mm Hardwood faced structural plywood is used in permanent structures where the board is likely to be used in humid or interior conditions. This high-grade structural panel is less prone to bending and twisting and, with its excellent strength to weight ratio, makes it versatile and easy to handle.
5.5mm Fire retardant plywood is not suitable for structural use and is treated using chemicals that make it unable to oxidize. It makes it hard to burn. Where applied, the FRT plywood will char when on fire but will not burn. Thus, it can significantly reduce the progress of a fire.
5.5mm COMBI is short for combination. Combi core is a mixture of poplar veneer and eucalyptus veneer. The combi plywood is a balance between poplar plywood and eucalyptus plywood.
5.5mm Our Malaysian structural plywood provides homeowners and merchants with a superior solution for interior and exterior applications using the highest quality tropical species. Remember to seal the sheets before using them externally (i.e. exposed to weather conditions).
| 82-164 | 165+ |
| £10.12£12.14 | £9.37£11.24 |





5.5mm Chinese Eucalyptus Hardwood Plywood is a structural plywood that provides homeowners and merchants with a superior solution for interior and exterior applications using the highest quality species. Remember to seal the sheets before using them externally (i.e. exposed to weather conditions).
TSU-01 is a SP101 direct alternative that is CFA approved and BS 8203 meeting or exceeding many regulations. Plywood density is 585-650kg/m3 and is mainly used as flooring plywood. The veneers of this 5.5mm flooring plywood are 1.3mm thick in order to prevent blisters and weak bonds. It also is constructed of 4 veneers instead of usual 3 layers. If you are looking to save some cash with something as high-performing as SP101, this is the plywood to go for your flooring project.
5.5mm “Koala” is an exterior grade, cost-effective, high-quality hardwood plywood, a direct alternative to a well known Jade 72. It is known that Koala has a better core and is better suited for CNC machinery. This versatile plywood that provides a good finish. It is ideal for outdoor use once sealed with a suitable coating or preservative.
It is excellent hardwood plywood engineered with waterproof glue. This plywood is not chemically treated; therefore, it is not resistant to rot. 6mm Marine plywood Q-mark has good grades, are robust, lightweight and defect-free.
6mm Birch plywood is made from only Birch veneers. Inner veneers are thicker than outer veneers, glued and laid up in alternating directions to the required thickness. It thus provides a superbly consistent strong panel with known engineering characteristics.
6mm Our Malaysian structural plywood provides homeowners and merchants with a superior solution for interior and exterior applications using the highest quality tropical species. Remember to seal the sheets before using them externally (i.e. exposed to weather conditions).
| 25-49 | 50+ |
| £38.52£46.22 | £36.50£43.80 |





Oak poplar plywood 6mm glued to the wood surface increases the beauty and charm of the furniture that no other decorative panels can. This is a much stronger and more durable version of the veneered board.
This 6mm 5×5 Birch plywood is often referred to as laser ply. It is often used for drawer sides, door panels, light carcass parts, small shelving, storage units and laser/CNC projects. It is super light and easy to cut. For interior use only.
6mm Garnica lightweight plywood panel manufactured from 100% European sustainable poplar. Exceptionally smooth, pale ivory surface ideal for painting, laminating, and interior fit-out.