How do I install sheet flooring?

The industry standard steps involve: Leaving the boards in the room to acclimatise. Clean and reinforce the subfloor for evenness. Lay out the boards in a staggered pattern to avoid the four corners meeting. Fasten the boards to joists or the substructure with an appropriate fastener Leave expansion gaps to account for humidity and temperature fluctuations Use MR or sealed boards to protect against the risk of spills and dampness. Check the floor for flatness once done to prevent furniture from catching against bumps.

What board is used for flooring?

There are several types used, but these are the most common ones: Chipboard OSB Plywood They tend to have features like tongue & groove profiling to interlock and reduce movement noise, MR protection, and may be pre-routed for UFH.

What is the best board for flooring?

The best board depends on what your priorities dictate, with regard to moisture resistance, strength, finish, cost, etc. For many floors, a P5 MR chipboard with tongue & groove is a great all-round choice. However, for wetter conditions or very visible finishes, a good quality plywood may be safer in the long run.

Flooring Board - Sheet Materials Wholesale

18mm Durelis P5 Tongue and Groove Moisture Resistant Chipboard Flooring TG4E 2400 x 600mm (8' x 2')

SPECIAL ORDER

18mm Durelis P5 Tongue and Groove Moisture Resistant Chipboard Flooring TG4E 2400mm x 600mm (8′ x 2′)

18mm Durelis P5 Tongue and Groove Moisture Resistant Chipboard Flooring TG4E 2400 x 600mm (8′ x 2′)

18mm P5 tongue and groove chipboard is a moisture-resistant structural grade flooring board. It is generally used in flooring applications as the board’s construction adds strength when panels are slotted together and screwed or nailed down to floor joists.

POA Get a quote

18mm Durelis P5 Tongue and Groove Moisture Resistant Chipboard Flooring TG4E 2400 x 600mm (8' x 2') Full Load 1400 boards

SPECIAL ORDER

18mm Durelis P5 Tongue and Groove Moisture Resistant Chipboard Flooring TG4E 2400 x 600mm (8′ x 2′) Full Load 1400 boards

18mm P5 tongue and groove chipboard is a moisture-resistant structural grade flooring board. It is generally used in flooring applications as the board’s construction adds strength when panels are slotted together and screwed or nailed down to floor joists.

POA Get a quote

18mm Swiss Krono OSB 3 TG4E Tongue And Groove Flooring Board 2440 x 595mm (8' x 1.95')

SPECIAL ORDER

2440 x 595 x 18mm Swiss Krono OSB3 TG4-2

2440 x 595 x 18mm Swiss Krono OSB3 TG4-3

2440 x 595 x 18mm Swiss Krono OSB3 TG4-4

2440 x 595 x 18mm Swiss Krono OSB3 TG4-5

18mm Swiss Krono OSB 3 TG4E Tongue And Groove Flooring Board 2440 x 595mm (8′ x 1.95′)

18mm Swiss Krono OSB 3 with Tongue and Groove profiling is versatile, BBA approved and water-resistant timber panel suitable for load-bearing roofing and flooring applications in dry and humid conditions.

POA Get a quote

18mm SmartPly OSB 3 TG4E Tongue And Groove Flooring Board 2400 x 600mm (8' x 2')

SPECIAL ORDER

18mm SmartPly OSB 3 TG4E Tongue And Groove Flooring Board 2400 x 600mm (8′ x 2′)

18mm OSB 3 with Tongue and Groove profiling is versatile, BBA approved and water-resistant timber panel suitable for load-bearing roofing and flooring applications in dry and humid conditions.

POA Get a quote

SPECIAL ORDER

21mm ARAUCOPLY Tongue & Groove TG2 Chilean Radiata Pine Softwood Plywood Flooring CPC 2400 x 1200mm (8′ x 4′)

Softwood Plywood is plywood which has a face and back veneer of softwood as opposed to a hardwood such as Birch, Maple, Oak, etc. Softwood plywood panels are comprised of a core made from either softwood then faced and backed with a veneer of soft wood and therefore are used for structural applications.

POA Get a quote

22mm Durelis P5 Tongue and Groove Moisture Resistant Chipboard Flooring TG4E 2400 x 600mm (8' x 2') FSC®

SPECIAL ORDER

22mm Durelis P5 Tongue and Groove Moisture Resistant Chipboard Flooring TG4E 2400mm x 600mm (8′ x 2′)

22mm Durelis P5 Tongue and Groove Moisture Resistant Chipboard Flooring TG4E 2400 x 600mm (8′ x 2′) FSC®

22mm P5 tongue and groove chipboard is a moisture-resistant structural grade flooring board. It is generally used in flooring applications as the construction of the board adds strength when boards are slotted together and screwed or nailed down to floor joists.

POA Get a quote

22mm Durelis P5 Tongue and Groove Moisture Resistant Chipboard Flooring TG4E 2400 x 600mm (8' x 2') FSC® Full Load 1200 boards

SPECIAL ORDER

22mm Durelis P5 Tongue and Groove Moisture Resistant Chipboard Flooring TG4E 2400 x 600mm (8′ x 2′) FSC® Full Load 1200 boards

22mm P5 tongue and groove chipboard is a moisture-resistant structural grade flooring board. It is generally used in flooring applications as the construction of the board adds strength when boards are slotted together and screwed or nailed down to floor joists.

POA Get a quote

38mm STREbord P6 TG2 LE Chipboard 2400 x 600mm (8′ x 2′) FSC®

SPECIAL ORDER

2400 x 600 x 38mm STREbord P6 Mezzanine Flooring Chipboard TG2 LE FSC®-2

2400 x 600 x 38mm STREbord P6 Mezzanine Flooring Chipboard TG2 LE FSC®-3

2400 x 600 x 38mm STREbord P6 Mezzanine Flooring Chipboard TG2 LE FSC®-4

2400 x 600 x 38mm STREbord P6 Mezzanine Flooring Chipboard TG2 LE FSC®-5

38mm STREbord P6 TG2 LE Chipboard 2400 x 600mm (8′ x 2′) FSC®

STREbord P6 TG2 LE Chipboard Flooring system is an innovative, next-generation board that has a unique composition comprising of two external chipboard faces with a chipboard core which is without comparison in the market currently.

POA Get a quote