-
Buy in Bulk & Save
51-101 102+ £10.54£12.65 £10.32£12.38 
18mm Kronobuild OSB 3 TG4E Tongue And Groove Flooring Board 2440 x 590mm (8′ x 1.94′) FSC®
18mm OSB 3 with Tongue and Groove profiling is versatile, BBA approved and water-resistant timber panel suitable for load-bearing roofing and flooring applications in dry and humid conditions.
£10.75£12.90 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
25-49 50+ £10.65£12.78 £10.43£12.52 18mm EGGER OSB 3 TG4E Tongue And Groove Roofing Board 2400 x 600mm (8′ x 2′) FSC®
18mm EGGER OSB 3 with Tongue and Groove profiling is versatile, BBA approved and water-resistant timber panel suitable for load-bearing roofing and flooring applications in dry and humid conditions.
£10.98£13.18 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
41-81 82+ £16.09£19.31 £15.76£18.91 
22mm SterlingOSB Zero OSB 3 TG4E Tongue And Groove Flooring Board 2440 x 590mm (8′ x 1.94′) FSC®
22mm OSB 3 with Tongue and Groove profiling is versatile, BBA approved and water-resistant timber panel suitable for load-bearing roofing and flooring applications in dry and humid conditions.
£16.59£19.91 Ex VATInc VAT Add to cart -
SaleBuy in Bulk & Save
18-35 36+ £25.14£30.17 £24.62£29.54 
30mm EGGER OSB 4 HDX TG2 Tongue And Groove Flooring Board 2400 x 675mm (8′ x 2.2′) FSC®
EGGER OSB HDX is a 30mm heavy-duty, load-bearing OSB 4 panel designed for applications to replace a commonly used 38mm Mezzanine Flooring. Its side is wider yet up to 20% lighter, making it easier to install and work with the boards.
Original price was: £26.46 Ex VAT (£31.75 Inc VAT).£25.92£31.10Current price is: £25.92 Ex VAT (£31.10 Inc VAT). Ex VATInc VAT Add to cart
Tongue and Groove OSB 3
There is nothing worse than a floor that moves under your feet. Some builders only realise this when it is already too late. Tongue and Groove OSB 3 is chosen to avoid exactly that. It creates a tight, stable surface that stays in place and does not turn a simple job into a repair later.
What is OSB tongue and groove?
Tongue and Groove OSB 3 is a structural wood-based panel. It is made from layers of oriented wood strands, usually pine or spruce. They are bonded with resin under heat and pressure, creating a strong and stable board.
The tongue and groove part refers to the edges of the board. One side has a shaped tongue. The other has a matching groove. When panels are pushed together, they lock into place. They form a continuous surface that spreads the load more evenly. It also reduces movement between boards.
These boards are produced to BS EN300 standard and usually come in thicknesses such as 18mm, 22mm and 30mm. Sizes include 2400 x 600mm, 2400 x 675mm and similar formats designed to sit well on joist spacing. The boards feature tongue and groove edges on all sides. They are supplied unfinished.
Most options are moisture resistant and fall under OSB3 grade, with some heavier duty variants available as OSB4 for higher load applications. FSC-certified options are available where marked with FSC®. Formaldehyde levels are usually rated E1, with some exceptions that don’t use formaldehyde at all; this is brand-specific.
Some boards may come with a Euroclass D fire rating, while others have no additional fire classification. Please check the required specification before purchase. The surface is usually untreated, though certain versions can be lacquered if required.
What is OSB tongue and groove used for
OSB tongue and groove is widely used as a subfloor over timber joists in new builds and extensions. It is used where panels need to sit tight, spread the load and stay stable before the final finish is installed. The same applies to renovation work, especially when replacing old or uneven floors. These floors often start to move or squeak over time.
Lofts and attics often use these boards to create practical storage space. The size makes them easier to handle in tight areas. In garages, workshops and utility rooms, they are used as a strong base that can handle tools, equipment and daily use.
They also show up in garden rooms, sheds and timber frame buildings, where a quick and reliable floor structure is needed. In these projects, the goal is usually the same. Get a surface down that is level, stable and ready for use without spending extra time adjusting each panel.
On site, OSB T&G boards are often used as temporary working platforms or walkways. The same boards are also used as a base layer under carpet, laminate or engineered flooring.
You will also see them in places that need strength more than appearance. Mezzanine floors, workshop platforms or barn conversions. They connect cleanly. Even in home projects, they are used under gym equipment or heavy shelving. This is where a stronger base makes a real difference over time.
Benefits of OSB T&G boards
- Interlocking edges reduce movement between panels.
- Helps prevent floor squeaks over time.
- Less need for additional support at joints.
- Consistent structure with no weak spots.
- Suitable for humid site conditions.
- Reliable performance during fitting and use.
- Easy to cut and handle on site.
- Cost effective solution for large areas.
- Works well as a base for most floor finishes.
- Maintains shape without warping when installed correctly.
Why choose our tongue and groove OSB 3?
You get boards that are ready to go. Our Tongue and Groove OSB 3 comes as project-ready stock, which means consistent sizes, clean edges and panels that fit together the way they should without forcing them into place. That alone saves time, especially when the job is already tight on schedule.
Pricing is another reason builders come back. We work with bulk and volume pricing in mind, so whether you are buying a few sheets or ordering pallet quantities, you are getting a good price that makes sense for the job, not just for a single purchase. Regular customers also benefit from trade discounts, which makes a real difference over time when you are running multiple projects.
Delivery is kept simple and reliable. You can choose fast delivery, including fast UK delivery when timing matters. Materials arrive when expected, so you are not left waiting or reshuffling your schedule around late shipments.
What also matters is how easy it is to deal with the order itself. From clear communication to order tracking and a proper VAT invoice provided, everything is set up to support real site work, not slow it down.
At the end of the day, people choose Sheet Materials Wholesale because the process feels straightforward. You order, it arrives as expected, and it works the way it should on site. That is what keeps professionals coming back and what makes the difference when the pressure is on.
FAQ
Where to buy tongue and groove OSB 3?
You can order it directly from Sheet Materials Wholesale online. Just choose your size, place the order and arrange delivery. Next-day delivery is available if you need it quickly.
How much does tongue and groove OSB 3 cost?
Prices usually start from around £10.90 +VAT per board. Check the latest price on the Sheet Materials Wholesale website.
How to install OSB tongue and groove?
Lay the boards across joists, slot the tongue into the groove and fix them down with screws or nails. Keep joints tight and stagger the boards. If you want a stronger result, you can add adhesive to the joints before fitting.
How much does tongue and groove OSB 3 weigh?
Most boards start from around 15 kg for 18mm 8x2 board. Thicker panels will be heavier, so it is worth checking before lifting or planning transport.
