18mm Egger U818 ST9 Dark Brown Melamine Faced Chipboard 2800 x 2070mm

18mm Egger U818 ST9 Dark Brown Melamine Faced Chipboard 2800 x 2070mm
18mm Egger U818 ST9 Dark Brown Melamine Faced Chipboard 2800 x 2070mm
18mm Egger U818 ST9 Dark Brown Melamine Faced Chipboard 2800 x 2070mm

Please note, the product may vary slightly in texture and colour from your screen.

SKU: SM4272
Brand: Egger

18mm Egger board MFC U818 ST9 Dark Brown is a saturated, deep brown that pairs naturally with lighter wood tones. ST9 gives the surface a soft matt feel. Suits kitchen cabinet fronts and furniture wanting a rich, grounded contrast.

Colour: Dark Brown
Show more
£106.95£128.34 Ex VATInc VAT

Available in 3-5 days

+-
Buy in Bulk & Save
Buy in Bulk & Save
14-27 28+
£103.74£124.49 £101.60£121.92
Lead Time: 3-5 days

The average delivery lead time for the majority of orders is 1-3 working days from the date of your order, however, it could extend to 5 working days on rare occasions or when you order products with extended lead times. Once the order has been placed, customers receive a text message and email confirmation, along with a tracking link, 24 hours before delivery. Only Palletline and Moffett customers are contacted directly by a member of staff. The next day delivery is available within M25 on orders placed on the day before 11AM, for other locations next day deliveries are available at the additional cost for orders placed before 11AM.

There is no Minimum order value, and we deliver nationwide:

  • Zone 1:
    Up to 1,000kg in weight โ€“ ยฃ50 ex VAT (Van delivery)
    1,000 โ€“ 24,000kgย  โ€“ ยฃ125 ex VAT per load (Moffett delivery)
  • Zone 2:
    Up to 1,000kg in weight โ€“ ยฃ70 ex VAT (Van delivery)
    1,000kg and above in weight (up to 2,000kg) โ€“ ยฃ100 ex VAT (Palletline)
    1,000 โ€“ 24,000kg โ€“ ยฃ150 ex VAT per load (Moffett delivery)
  • Zone 3:
    Up to 1,000kg in weight โ€“ ยฃ90 ex VAT (Van delivery)
    1,000kg and above in weight (up to 2,000kg) โ€“ ยฃ100 ex VAT (Palletline)
    1,000 โ€“ 24,000kg โ€“ ยฃ250 ex VAT per load (Moffett delivery)
  • Zone 4:
    Custom delivery costs are calculated at checkout based on your postcode. (Palletline)
    6,000kg MAX weight for orders to zone 4.

Moffett note*
When ordering above the 24,000kg vehicle limit, you will be charged for separate Moffett delivery automatically. For example: You require a 30,000kg delivery to Zone 1: you will be charged ยฃ125 ex VAT x2, totalling ยฃ250 ex VAT for delivery.

Delivery map
+ -

If you are placing order for large sheets (10x5 or 10x4) to zone 4 you may encounter delivery restrictions, in this case - please click on the โ€œSave & Share cartโ€ button at the cart stage, select the email option and send it to [email protected] or call us on 0203 856 8578. We will get back with a delivery quote to you shortly.

See Full Transport Policy
Order sample

18mm Egger board MFC U818 ST9 Dark Brown is a saturated, deep brown that pairs naturally with lighter wood tones. ST9 gives the surface a soft matt feel. Suits kitchen cabinet fronts and furniture wanting a rich, grounded contrast.

  • Additional information

    Brand Egger
    Weight 70 kg
    Thickness

    18mm
    Size

    2800 x 2070mm
    Applications

    Cabinets, Closet systems, Furniture, Office, Shelving, Wall panelling
    Class

    Carb2
    Country of origin

    UK
    Edging

    Square cut
    Features

    Cuttable, Lacquerable
    Finish

    Smoothtouch Matt
    Colour

    Dark Brown
    Colour Tone

    Brown
    Fire rating

    Euroclass D-s2,d0
    Formaldehyde level

    E05
    Grade

    Chipboard
    Moisture resistant

    No
    Product standard

    Non structural
    Veneer

    Melamine
    Weather exposure

    Interior
    Surface finish

    Smooth texture

  • Description

    18mm Egger U818 ST9 Dark Brown Melamine Faced Chipboard 2800 x 2070mm is manufactured in the UK by Egger, part of the Brown Unicolours range within Egger’s wider Uni Colours collection.

    Colour and surface
    Dark Brown is a genuinely saturated tone, deeper than a muted or greyed brown. It sits comfortably against lighter, natural wood types, creating real depth rather than a flat contrast. ST9 Smoothtouch Matt adds a soft, velvety feel across the surface. It also handles everyday marks and spills well, staying easy to keep looking clean.

    Construction and performance
    The core of this panel is non-structural, designed for dry interior use and faced on both sides with resin-impregnated decorative paper pressed into a durable melamine surface. It can be easily cut and edge banded. Fire behaviour is classified D-s2,d0 under EN 13501-1, and the formaldehyde level meets E05. It is intended for dry interior applications. It can be used for kitchen cabinets and furniture, but should not be installed where the board or exposed edges will be subject to persistent moisture, standing water or direct wetting.

    Where to use it

    18mm Egger board U818 ST9 Dark Brown MFC suits a range of interior fit out work:

    • Kitchen cabinet fronts paired with light oak worktops.
    • Fitted wardrobe doors set against pale timber flooring.
    • Office storage and desking for a grounded, professional look.
    • Open shelving where depth of colour matters.
    • Built-in wardrobe interiors finished to match the visible fronts.

    A colour matched U818 ST9 ABS edging tape is available for this decor, supplied unglued in 0.8mm and 2mm thicknesses for use with hot melt edgebanding machines.

  • Datasheet

    Download

    Cleaning & Care Recommendations

    Download

    Environmental and health data sheet

    Download

  • Questions and answers of the customers

    There are no questions yet. Be the first to ask a question about this product.

    Send me a notification for each new answer.
    1. Q Can this panel be used for open shelving without warping over time?
      A

      Yes, provided shelves are supported at reasonable intervals for their length. Like any chipboard panel, very long unsupported spans can sag under sustained weight, so intermediate support helps keep shelving flat long term.
    2. Q Does this decor need a specific type of screw or fixing, or do standard ones work?
      A

      Standard wood screws and cam fittings work well with this panel, the same as with any Egger MFC board. Pilot holes are worth drilling first, particularly near an edge, to avoid splitting the chipboard core.
    3. Q Can this panel be used for a wardrobe interior, not just the visible doors?
      A

      Definitely. The colour and finish don't change anywhere on the sheet, so it works just as well for the shelving and carcass inside as it does for the doors people actually see.
    4. Q Does the surface need resealing or maintenance over time, like a painted or oiled wood finish would?
      A

      No. The melamine facing is fully finished at manufacture, so there's no resealing, oiling or recoating required, unlike a painted or oiled timber surface.
    5. Q Is it possible to get a close colour match if I need to order more of this panel at a later date?
      A

      It's usually a close match, since Dark Brown is a standard part of Egger's ongoing range rather than a limited or seasonal decor. Slight variation between production batches is still possible, so ordering everything for one project together remains the safest approach.

Related products

  • Buy in Bulk & Save
    26-49 50+
    £19.20£23.04 £18.80£22.56
    18mm SmartPly OSB 3 Board 2440 x 1220mm (8' x 4') FSCยฎ2440 x 1220 x 18mm Smartply Max OSB3 FSCยฎ-22440 x 1220 x 18mm Smartply Max OSB3 FSCยฎ-32440 x 1220 x 18mm Smartply Max OSB3 FSCยฎ-42440 x 1220 x 18mm Smartply SiteProtect Pre-Primed 1 Side OSB3 FSCยฎ-5

    18mm SmartPly OSB 3 Board 2440 x 1220mm (8′ x 4′) FSCยฎ

    18mm Smartply OSB3 is an engineered, load-bearing wood-based panel product, free of knots and voids, and suitable for structural use in humid situations.

    £19.79£23.75 Ex VATInc VAT Add to cart
  • Buy in Bulk & Save
    75-149 150+
    £9.42£11.30 £9.16£10.99
    6mm Premium MDF Board 2440 x 1220mm (8' x 4') FSCยฎIMG_9737IMG_9738IMG_0177IMG_0178

    6mm Premium MDF Board 2440 x 1220mm (8′ x 4′) FSCยฎ

    MDF 6mm is a composite panel product consisting of cellulosic fibres compressed with a synthetic resin or other ideal bonding system and joined together under extreme heat and pressure. For light carpentry projects, such as shelving and trim, 6mm MDF can be excellent.

    £9.69£11.63 Ex VATInc VAT Add to cart
  • 18mm Birch Core Brown Anti Slip Mesh Phenolic Faced Film Plywood 2440 X 1220mm (8โ€ฒ X 4โ€ฒ) Pack of 35Available in 5-7 daysIMG_9704IMG_9705

    18mm Birch Core Brown Anti Slip Mesh Phenolic Faced Film Plywood 2440 X 1220mm (8โ€ฒ X 4โ€ฒ) Pack of 35

    18mm phenolic resin impregnated film is pressed on both surfaces of the board under high pressure and temperature, smooth on one surface and a textured pattern is pressed onto the other.

    £3,566.85£4,280.22 Ex VATInc VAT
    £101.91£122.29 Per Sheet     Add to cart
  • Buy in Bulk & Save
    25-47 50+
    £24.61£29.53 £23.85£28.62
    18mm Premium MDF Board 2440 x 1220mm (8' x 4') FSCยฎIMG_9722IMG_9723IMG_0183IMG_0184

    18mm Premium MDF Board 2440 x 1220mm (8′ x 4′) FSCยฎ

    MDF 18mm is a composite panel product consisting of cellulosic fibres compressed with a synthetic resin or other ideal bonding system and joined together under extreme heat and pressure. For light carpentry projects, such as shelving and trim, 18mm MDF can be excellent.

    £25.37£30.44 Ex VATInc VAT Add to cart