Sheet Materials
... Read more
Showing 529–552 of 620 results
-
9mm Indonesian Mujur Keruing Faced Meranti Core Marine Plywood BB/BB BS 1088 2440mm x 1220mm (8′ x 4′)
It is excellent hardwood plywood engineered with waterproof glue. This plywood is not chemically treated; therefore, it is not resistant to rot. 9mm Marine plywood mujur has good grades, are robust, lightweight and defect-free.
POA Get a quote -
11mm OSB 3 Board 2397mm x 1197mm (7.86′ x 3.92′) FSC®
OSB3 is an engineered, load-bearing wood-based panel product, free of knots and voids, and suitable for structural use in humid situations.
POA Get a quote -
12mm Chinese Pinex Poplar Pine Structural Softwood Plywood C+/C CE2+ 2440mm x 1220mm (8′ x 4′)
Softwood shuttering plywood of structural quality. A high-strength board that can be used both indoors and outdoors. Ideal for high load-bearing applications.
POA Get a quote -
12mm Birch Plywood Throughout BB/CP 2440mm x 1220mm (8′ x 4′) FSC®
Birch plywood is made from only Birch veneers of the same thickness, glued and laid up in alternating directions to the required thickness. It thus provides a superbly consistent strong panel with known engineering characteristics.
POA Get a quote -
12mm Elliotis Pine Merchant Grade Plywood CE4 2440mm x 1220mm (8′ x 4′)
Merchant Grade Elliotis is a shuttering used for protecting floors or for heavy machinery to drive over them. This plywood is a low grade and will have loads of core gaps, the face/reverse will have loads of knot filler and be un-sanded, and some face veneer is missing. The look of the ply isn’t great. It’s a Non-structural ply and shouldn’t be used for structural purposes. This plywood doesn’t conform to any plywood standard.
POA Get a quote -
12mm Formwork Plywood Elliotis BCX Structural Pine 2440mm x 1220mm (8′ x 4′)
Softwood plywood is mainly produced utilising Elliotis Pine but other species such as Southern Yellow Pine and Spruce are also used depending on the country of manufacture. As general utility plywood it has many and varied ends uses including site hoarding, flooring, stud walling and packaging to name but a few.
POA Get a quote -
12mm Black Hexagon Pattern Eucalyptus Core Slip Resistant Phenolic Film Plywood 2440mm X 1220mm (8′ X 4′) Pack of 75
12mm Black Hexagon Pattern Eucalyptus Core Slip Resistant Phenolic Film Plywood 2440mm X 1220mm (8′ X 4′) These buffalo boards come in packs of 75 sheets.
POA Get a quote -
12mm Birch Plywood Throughout BB/WG 2440mm x 1220mm (8′ x 4′)
Birch plywood is made from only Birch veneers of the same thickness, glued and laid up in alternating directions to the required thickness. It thus provides a superbly consistent strong panel with known engineering characteristics.
POA Get a quote -
12mm Brown Mesh Phenol Faced Poplar Core Plywood 2440mm x 1220mm (8′ X 4′)
Brown Mesh Phenol Faced Poplar Core Plywood is designed and manufactured especially for internal & external applications, has an anti-slip mesh pattern on one side and a smooth film face finish on the other side. These sheets have been manufactured to high standards, making them resistant to corrosion and moisture after sealing the edges and back of the board.
POA Get a quote -
12mm Fire Retardant Paged Polish Pine Softwood Plywood Euroclass B 2440mm x 1220mm (8′ x 4′) FSC®
12mm Softwood Fire retardant plywood uses a treatment process to treat each layer separately, giving it a clean look and making it sturdy. Where applied, the FRT plywood will char when on fire but will not burn. Thus, it can significantly reduce the progress of a fire.
POA Get a quote -
12mm Indonesian Mujur Keruing Faced Meranti Core Marine Plywood BB/BB BS 1088 2440mm x 1220mm (8′ x 4′)
It is excellent hardwood plywood engineered with waterproof glue. This plywood is not chemically treated; therefore, it is not resistant to rot. 12mm Marine plywood mujur has good grades, are robust, lightweight and defect-free.
POA Get a quote -
12mm Durelis VapourBlock P5 Moisture Resistant Chipboard Airtight Vapour Control Coating 2400mm x 1196mm (8′ x 4′) FSC® Load of 1080
12mm VapourBlock Moisture-resistant P5 board by Durelis is airtight and has a vapour-control layer on top of it. Very often in big construction sites you will see them used within humid conditions and they are often used specifically for walls, timber frames and racking boards.
POA Get a quote -
12mm Eucalyptus Core Anti Slip Mesh Phenolic Film Plywood 2440mm X 1220mm (8′ X 4′) FSC®
Anti-Slip Mesh Eucalyptus Core Phenolic Resin Hardwood Plywood is designed and manufactured especially for internal & external applications, has an anti-slip mesh pattern on one side and a smooth film face finish on the other side. These sheets have been manufactured to high standards, making them resistant to corrosion and moisture after sealing the edges and back of the board.
POA Get a quote -
13mm V-Grooved Oak Veneered Black MDF 2 Sides Crown Cut 2440mm x 1220mm (8′ x 4′)
13mm V-Grooved Oak Veneered Black MDF 2 Sides Crown Cut 2440mm x 1220mm (8′ x 4′)
(0 reviews)POA Get a quote -
15mm Birch Plywood Throughout BB/CP 2440mm x 1220mm (8′ x 4′) FSC®
Birch plywood is made from only Birch veneers of the same thickness, glued and laid up in alternating directions to the required thickness. It thus provides a superbly consistent strong panel with known engineering characteristics.
(0 reviews)POA Get a quote -
15mm Chinese Hardwood Q Mark External Grade Plywood B/BB CE2+ 2440mm x 1220mm (8′ x 4′)
Q Mark Hardwood Plywood is used in structural applications such as walls, flooring and roofing, and areas such as shop-fitting and bookcases. It comprises thin layers of wood that are glued together, creating a more durable and stable wood sheet. It can be used externally once it has been sealed with oil-based paint.
POA Get a quote -
15mm Chinese Internal Grade Hardwood Plywood BB/CC CE2+ 2440mm x 1220mm (8′ x 4′)
Interior plywood is a form of plywood specially designed to use indoors. This grade of plywood provides infills and fillers. While not weather-resistant, it excels in indoor and roof applications. For areas exposed to regular water contact, like bathrooms and kitchens, explore our weather-resistant Exterior Plywood. Perfect for concealed installations in floors, walls, and roofs, it ensures robust structural support. However, please note that it is not intended for decorative purposes.
POA Get a quote -
15mm Chinese Pinex/Pine+ Poplar Pine Structural Softwood Plywood 2440mm x 1220mm (8′ x 4′)
Delivering a very high structural performance, these panels are not repaired and may have composed faces and backs. They offer a perfect solution for applications such as roof sheathing, sidewalls, subflooring, crating, packing, pallet components, etc.
POA Get a quote -
15mm OSB 3 Board 2397mm x 1196mm (7.86′ x 3.92′) FSC®
OSB3 is an engineered, load-bearing wood-based panel product, free of knots and voids, and suitable for structural use in humid situations.
POA Get a quote -
15mm Birch Plywood Throughout BB/WG 2440mm x 1220mm (8′ x 4′)
Birch plywood is made from only Birch veneers of the same thickness, glued and laid up in alternating directions to the required thickness. It thus provides a superbly consistent strong panel with known engineering characteristics.
POA Get a quote -
15mm OSB3 Board 2400mm x 1200mm (8′ x 4′) FSC®
OSB3 is an engineered, load-bearing wood-based panel product, free of knots and voids, and suitable for structural use in humid situations.
POA Get a quote -
17.5mm MDO Film Faced Plywood (Paper One Side, Film Other Side) 2440mm x 1220mm (8′ x 4′)
Tulsa MDO323 products are manufactured 100% quality Radiata Pine veneers covered with the main face of 370gms/m2 MDO paper, and back of 120-130gms/m2 film with a phenolic resin content of 35%. Tulsa overlay panels provide high-quality finish answers for hardness, water-resistance and behavioural stability. With these characteristics, Tulsa overlay panels are designed to allow the end-user the opportunity for a high number of re-uses. With proper handling, care and treatment with an appropriate chemical reactive release agent, the contractor can achieve as many as 10 re-uses. FSC® Certified.
POA Get a quote -
18mm Birch Plywood Throughout BB/CP 2440mm x 1220mm (8′ x 4′) FSC®
Birch plywood is made from only Birch veneers of the same thickness, glued and laid up in alternating directions to the required thickness. It thus provides a superbly consistent strong panel with known engineering characteristics.
POA Get a quote
