Our specialist stores
Our specialist stores
Sheet Materials
Sheet Materials Range
-
-
Fixings & Accessories (17)
-
Tongue And Groove Boards (35)
-
Loft Boards (23)
-
Timber (20)
-
Sheet Materials For Sale (133)
-
Blockboard (1)
-
Wall Panels (37)
-
Wood Veneers (178)
-
Flooring Board (45)
-
Chipboard (99)
-
Door Blank (44)
-
Furniture Board (425)
-
Hardboard (6)
-
Fire Board (61)
-
Cement & Non-Combustible Boards (17)
-
MDF (559)
-
Melamine Board (85)
-
OSB Board (25)
-
Plywood (276)
Showing 901–936 of 1095
Products in Sheet Materials
-
Buy in Bulk & Save
5-9 10+ £267.39£320.87 £261.88£314.26 
Available in 3-5 days44mm Halspan Optima FD30 Ash Veneered Graduated Density Chipboard Door Core Unlipped 2440 x 1220mm (8′ x 4′)
44mm Ash Veneered Halspan Optima door blank uses a graduated-density chipboard core with integral facings. It’s unlipped, lightweight and fire-resistant for up to 30 minutes (FD30). Supplied with square-edge and is for internal use only.
£275.66£330.79 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
5-9 10+ £300.50£360.60 £294.30£353.16 Available in 3-5 days44mm Halspan Optima FD30 Oak Veneered Graduated Density Chipboard Door Core Unlipped 2440 x 1220mm (8′ x 4′)
44mm Oak Veneered Halspan Optima door blank uses a graduated-density chipboard core with integral facings. It’s unlipped, lightweight and fire-resistant for up to 30 minutes (FD30). Supplied with square-edge and is for internal use only.
£309.79£371.75 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
5-9 10+ £276.15£331.38 £270.46£324.55 Available in 3-5 days44mm Halspan Optima FD30 Sapele Veneered Graduated Density Chipboard Door Core Unlipped 2440 x 1220mm (8′ x 4′)
44mm Sapele Veneered Halspan Optima door blank uses a graduated-density chipboard core with integral facings. It’s unlipped, lightweight and fire-resistant for up to 30 minutes (FD30). Supplied with square-edge and is for internal use only.
£284.69£341.63 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
5-9 10+ £276.15£331.38 £270.46£324.55 Available in 3-5 days44mm Halspan Optima FD30 Steamed Beech Veneered Graduated Density Chipboard Door Core Unlipped 2440 x 1220mm (8′ x 4′)
44mm Steamed Beech Veneered Halspan Optima door blank uses a graduated-density chipboard core with integral facings. It’s unlipped, lightweight and fire-resistant for up to 30 minutes (FD30). Supplied with square-edge and is for internal use only.
£284.69£341.63 Ex VATInc VAT Add to cart -
45mm MDF Board 3050 x 1220mm (10′ x 4′) FSC® Pack of 15
MDF 45mm is a composite panel product consisting of cellulosic fibres compressed with a synthetic resin or other ideal bonding system and joined together under extreme heat and pressure. For light carpentry projects, such as shelving and trim, 45mm MDF can be excellent.
£1,746.16£2,095.39 Ex VATInc VAT£116.41£139.69 Per Sheet Add to cart -
Buy in Bulk & Save
7-14 15+ £141.46£169.75 £134.02£160.82 Available in 5-7 days45mm Premium MDF Board 2440 x 1220mm (8′ x 4′) FSC®
45mm MDF Board (also known as Medium Density Fibre) is commonly used for internal projects such as joinery, cabinet making, wardrobe, panelling, furniture and much more. MDF has a smooth and clean finish with no grain or knots and is suitable for finishing with oil, varnish or paint. The dense and lightweight board is strong and durable and can be easily fixed with glues and screws.
£148.91£178.69 Ex VATInc VAT Add to cart -
Iron On Black Walnut Veneer Edging Tape Strip 50mm x 50m
The Black Walnut Veneer Edging tape is pre-glued and comes in a 50mm width and 0.6mm thickness. Iron on the edging tape strip to your exposed edge and trim off the excess. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£55.50£66.60 Ex VATInc VAT Add to cart -
Iron On Birch Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Birch 50mm x 50m tape strip to cover the edge of birch veneered Plywood or MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£31.25£37.50 Ex VATInc VAT Add to cart -
Iron On Cherry Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Cherry 50mm x 50m tape strip to cover the edge of cherry veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£29.50£35.40 Ex VATInc VAT Add to cart -
Iron On Maple Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Maple 50mm x 50m tape strip to cover the edge of maple veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£31.25£37.50 Ex VATInc VAT Add to cart -
Iron On Pine Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Pine 50mm x 50m tape strip to cover the edge of pine veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£28.37£34.04 Ex VATInc VAT Add to cart -
Iron On Sapele Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Sapele 50mm x 50m tape strip to cover the edge of sapele veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£27.75£33.30 Ex VATInc VAT Add to cart -
Iron On Ash Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Ash 50mm x 50m tape strip to cover the edge of ash veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£28.95£34.74 Ex VATInc VAT Add to cart -
Iron On Steamed Beech Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Steamed Beech 30mm x 50m tape strip to cover the edge of steamed beech veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£27.95£33.54 Ex VATInc VAT Add to cart -
Iron On Cedar Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Cedar 50mm x 50m tape strip to cover the edge of cedar veneered Plywood or MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£54.81£65.77 Ex VATInc VAT Add to cart -
Iron On Chestnut Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Chestnut 50mm x 50m tape strip to cover the edge of chestnut veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£62.50£75.00 Ex VATInc VAT Add to cart -
Iron On Ebony Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Ebony 50mm x 50m tape strip to cover the edge of ebony veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£147.79£177.35 Ex VATInc VAT Add to cart -
Iron On Elm Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Elm 50mm x 50m tape strip to cover the edge of elm veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£61.79£74.15 Ex VATInc VAT Add to cart -
Iron On Iroko Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Iroko 50mm x 50m tape strip to cover the edge of Iroko veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£39.95£47.94 Ex VATInc VAT Add to cart -
Iron On Red Oak Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Red Oak 50mm x 50m tape strip to cover the edge of red oak veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£31.95£38.34 Ex VATInc VAT Add to cart -
Iron On Teak Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Teak 50mm x 50m tape strip to cover the edge of teak veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£71.68£86.02 Ex VATInc VAT Add to cart -
Iron On Wenge Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Wenge 50mm x 50m tape strip to cover the edge of wenge veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£62.95£75.54 Ex VATInc VAT Add to cart -
Iron On Zebrano Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Zebrano 50mm x 50m tape strip to cover the edge of zebrano veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£74.95£89.94 Ex VATInc VAT Add to cart -
Iron On Engineered Ebony Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Engineered Ebony 50mm x 50m tape strip to cover the edge of Engineered ebony veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£55.95£67.14 Ex VATInc VAT Add to cart -
Iron On Rosewood Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Rosewood 50mm x 50m tape strip to cover the edge of rosewood veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£99.95£119.94 Ex VATInc VAT Add to cart -
Iron On Anegre Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Anegre 50mm x 50m tape strip to cover the edge of anegre veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£32.95£39.54 Ex VATInc VAT Add to cart -
Unglued Black Walnut Veneer Edging Tape Strip 50mm x 100m
The Black Walnut Veneer Edging tape is unglued and comes in a 50mm width and 0.6mm thickness. Iron on the edging tape strip to your exposed edge and trim off the excess.
£92.03£110.44 Ex VATInc VAT Add to cart -
Unglued Oak Veneer Edging Tape Strip 50mm x 100m
Unglued Veneer Edging White Oak 50mm x 100m tape strip to cover the edge of oak veneered MDF, Chipboard or Plywood.
£74.41£89.29 Ex VATInc VAT Add to cart -
50mm Finsa MDF Board 2440 x 1220mm (8′ x 4′) FSC® Pack of 15
50mm MDF Board (also known as Medium Density Fibre) is commonly used for internal projects such as joinery, cabinet making, wardrobe, panelling, furniture and much more. MDF has a smooth and clean finish with no grain or knots and is suitable for finishing with oil, varnish or paint. The dense and lightweight board is strong and durable and can be easily fixed with glues and screws.
£2,444.42£2,933.30 Ex VATInc VAT£162.96£195.55 Per Sheet Add to cart -
Buy in Bulk & Save
132-263 264+ £2.50£3.00 £2.45£2.94 47 x 50mm Treated Carcassing Timber (2” x 2”) 2400mm
Our C16 graded 2×2 timber that stays straight and strong, it is kiln dried and minimises movement. The pressure treatment resists rot and pests. It comes from a slow-grown softwood, which means a smoother finish, excellent stability and robust load performance.
£2.58£3.10 Ex VATInc VAT£1.08£1.30 Per M Add to cart -
Buy in Bulk & Save
132-263 264+ £2.97£3.56 £2.91£3.49 47 x 50mm Treated Carcassing Timber (2” x 2”) 3000mm
Our C16 graded 2×2 timber that stays straight and strong, it is kiln dried and minimises movement. The pressure treatment resists rot and pests. It comes from a slow-grown softwood, which means a smoother finish, excellent stability and robust load performance.
£3.06£3.67 Ex VATInc VAT£1.02£1.22 Per M Add to cart -
Buy in Bulk & Save
132-263 264+ £3.77£4.52 £3.70£4.44 47 x 50mm Treated Carcassing Timber (2” x 2”) 3600mm
Our C16 graded 2×2 timber that stays straight and strong, it is kiln dried and minimises movement. The pressure treatment resists rot and pests. It comes from a slow-grown softwood, which means a smoother finish, excellent stability and robust load performance.
£3.89£4.67 Ex VATInc VAT£1.08£1.30 Per M Add to cart -
Buy in Bulk & Save
7-14 15+ £166.25£199.50 £157.50£189.00 50mm Premium MDF Board 2440 x 1220mm (8′ x 4′) FSC®
50mm MDF Board (also known as Medium Density Fibre) is commonly used for internal projects such as joinery, cabinet making, wardrobe, panelling, furniture and much more. MDF has a smooth and clean finish with no grain or knots and is suitable for finishing with oil, varnish or paint. The dense and lightweight board is strong and durable and can be easily fixed with glues and screws.
£175.00£210.00 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
7-14 15+ £186.96£224.35 £177.12£212.54 Available in 5-7 days50mm Premium MDF Board 3050 x 1220mm (10′ x 4′) FSC®
50mm MDF Board 10×4 (also known as Medium Density Fibre) is commonly used for internal projects such as joinery, cabinet making, wardrobe, panelling, furniture and much more. MDF has a smooth and clean finish with no grain or knots and is suitable for finishing with oil, varnish or paint. The dense and lightweight board is strong and durable and can be easily fixed with glues and screws.
£196.80£236.16 Ex VATInc VAT Add to cart -
50mm NoMorePly Fibre Cement Floor Screws Box of 250
50mm NoMorePly® Screws are made for fixing 18mm and 22mm TG4 fibre cement flooring boards. The fast-cutting tip drives easily into tough boards, while the countersinking head leaves a smooth, flush finish. Ideal for creating a strong, secure and long-lasting floor installation.
£11.45£13.74 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
9-17 18+ £145.75£174.90 £141.63£169.96 54mm Flamebreak FD60 MDF Faced Lightweight Solid Door Blank Unlipped 2135 x 915mm (7′ x 3′)
54mm Flamebreak door blank is 6mm mdf faced and Falcatta Solid Core. Its lightweight and is fire resistant for up to 60 minutes (FD60). MDF Faced 54mm door blank is unlipped, FLEGT Licensed and q-mark certified It may be shaped or cut to suit your size needs. These doors are made for internal use only.
£149.87£179.84 Ex VATInc VAT Add to cart
