



























COMBI is short for combination. Combi core is a mixture of poplar veneer and eucalyptus veneer. The combi plywood is a balance between poplar plywood and eucalyptus plywood.
| 13-25 | 26+ |
| £69.07£82.88 | £66.91£80.29 |





Birch plywood is made from only Birch veneers of the same thickness, glued and laid up in alternating directions to the required thickness. It thus provides a superbly consistent strong panel with known engineering characteristics.
15mm Jade 72 is an exterior grade, cost-effective, high-quality hardwood plywood, suitable for various applications. Created using weather and boil proof adhesive and hardwood throughout, this versatile plywood provides a good finish. It is ideal for outdoor use once sealed with a suitable coating or preservative.
Birch plywood is made from only Birch veneers. Inner veneers are thicker than outer veneers, glued and laid up in alternating directions to the required thickness. It thus provides a superbly consistent strong panel with known engineering characteristics.
| 30-59 | 60+ |
| £89.37£107.24 | £84.76£101.71 |
Available in 3-5 days



15mm Wisa SpruceFR softwood plywood is a Class B fire retardant structural sheet that is very sturdy and high quality. As well as structural use, it also is commonly seen in the use of load-bearing applications.
| 20-39 | 40+ |
| £176.87£212.24 | £171.29£205.55 |
Available in 3-5 days15mm Double-sided White Melamine Plywood A Grade features a strong birch plywood core with a melamine layer on both sides of the board. It can be used in furniture works and general interior projects, it offers excellent strength, stability, and a clean finish.
Hardwood faced structural plywood is used in permanent structures where the board is likely to be used in humid or interior conditions. This high-grade structural panel is less prone to bending and twisting and, with its excellent strength to weight ratio, makes it versatile and easy to handle.
| 16-32 | 33+ |
| £97.66£117.19 | £92.52£111.02 |
Available in 3-5 days



15mm phenolic resin impregnated film Buffalo board is pressed on both surfaces of the board under high pressure and temperature, smooth on one surface and a textured pattern is pressed onto the other.
| 20-39 | 40+ |
| £121.53£145.84 | £115.14£138.17 |
Available in 3-5 daysHigh quality 15mm birch plywood with a factory applied decorative lacquer that’s saving your time. Ready-to-use lacquered birch plywood with smooth surface to work on your furniture, interior walls, ceilings and more applications.
This 15mm 5×5 Birch plywood is often referred to as laser ply. It is often used for partitions, furniture carcasses, shelving, heavier loads, storage units and laser/CNC projects. It is super light and easy to cut. For interior use only.
| 30-59 | 60+ |
| £40.06£48.07 | £39.24£47.09 |





15mm Wisa Spruce Special Softwood Plywood is a great all-around use CE2+ graded sheet. Spruce veneers allow this ply to become lightweight and suitable for multiple applications, including joinery, roofing, wall sheeting, and general DIY projects.
| 20-39 | 40+ |
| £191.95£230.34 | £181.85£218.22 |
Available in 5-7 days



15mm phenolic resin impregnated film Buffalo board is pressed on both surfaces of the board under high pressure and temperature, smooth on one surface and a textured pattern is pressed onto the other.
| 20-39 | 40+ |
| £79.09£94.91 | £76.59£91.91 |
Available in 3-5 days15mm Garnica lightweight plywood panel manufactured from 100% European sustainable poplar. Exceptionally smooth, pale ivory surface ideal for painting, laminating, and interior fit-out.
15mm Garnica Fire rated (FR) Euroclass B grade interior plywood, engineered for applications where fire safety compliance is required. The fire-retardant treatment penetrates the entire board and remains effective even after sanding or machining.
Our 15mm Malaysian structural plywood provides homeowners and merchants with a superior solution for interior and exterior applications using the highest quality tropical species. Remember to seal the sheets before using them externally ( i.e. exposed to weather conditions).
| 30-59 | 60+ |
| £44.26£53.11 | £43.35£52.02 |





15mm Anti-Slip Chinese Hexagon Pattern Eucalyptus Core Phenolic Resin Hardwood Plywood is designed and manufactured especially for internal & external applications. Pressed on both surfaces with a multi-laminated core and Aica, also known as Dynea, overlay, you can expect a high performance from this board.
| 20-39 | 40+ |
| £111.91£134.29 | £109.60£131.52 |
Available in 3-5 days



15mm Garnica Reinforced plywood with maple faces on a mixed poplar and eucalyptus globulus hardwood core makes it a good alternative to birch. Exterior glue bond EN636, touch-sanded finish, multi-layer edges, ideal for decorative purposes and exposed-edge furniture and fittings.
Hardwood Eucalyptus faced structural plywood is used in permanent structures where the board is likely to be used in humid or interior conditions. This high-grade structural panel is less prone to bending and twisting and, with its excellent strength to weight ratio, makes it versatile and easy to handle.
Softwood plywood is mainly produced utilising Elliotis Pine but other species such as Southern Yellow Pine and Spruce are also used depending on the country of manufacture. As general utility plywood it has many and varied ends uses including site hoarding, flooring, stud walling and packaging to name but a few.
18mm phenolic resin impregnated film is pressed on both surfaces of the board under high pressure and temperature, smooth on one surface and a textured pattern is pressed onto the other.
| 25-49 | 50+ |
| £49.35£59.22 | £45.72£54.86 |





It is excellent hardwood plywood engineered with waterproof glue. This plywood is not chemically treated; therefore, it is not resistant to rot. 18mm Marine plywood has good grades, are robust, lightweight and defect-free.
Hardwood faced structural plywood is used in permanent structures where the board is likely to be used in humid or interior conditions. This high-grade structural panel is less prone to bending and twisting and, with its excellent strength to weight ratio, makes it versatile and easy to handle.
Hardwood faced structural combi core plywood is used in permanent structures where the board is likely to be used in humid or interior conditions. This high-grade structural panel is less prone to bending and twisting and, with its excellent strength to weight ratio, makes it versatile and easy to handle.
Fire retardant plywood is not suitable for structural use and is treated using chemicals that make it unable to oxidize. It makes it hard to burn. Where applied, the FRT plywood will char when on fire but will not burn. Thus, it can significantly reduce the progress of a fire.
18mm Film-faced plywood is also called formwork plywood, concrete form. 18mm Film faced plywood is the special plywood with two sides coated with a wearable and waterproof film. The film is adhesive impregnated paper. This plywood is also known as Black plywood. The function of the film is to protect the inside wood from moisture, water, weather and extend the plywood’s service life. 18mm Film faced plywood can be used in the harsh and outside environment: formwork plywood, concrete formwork, floorboard, vehicle building.
Anti-Slip Mesh Eucalyptus Core Phenolic Resin Hardwood Plywood is designed and manufactured especially for internal & external applications, has an anti-slip mesh pattern on one side 260g/m2 and a smooth film face finish on the other side 130g/m2. These sheets have been manufactured to high standards, making them resistant to corrosion and moisture after sealing the edges and back of the board.
COMBI is short for combination. Combi core is a mixture of poplar veneer and eucalyptus veneer. The combi plywood is a balance between poplar plywood and eucalyptus plywood.
Our Malaysian structural plywood provides homeowners and merchants with a superior solution for interior and exterior applications using the highest quality tropical species. Remember to seal the sheets before using them externally ( i.e. exposed to weather conditions).
| 11-21 | 22+ |
| £86.48£103.78 | £84.69£101.63 |





Birch plywood is made from only Birch veneers of the same thickness, glued and laid up in alternating directions to the required thickness. It thus provides a superbly consistent strong panel with known engineering characteristics.
Interior plywood is a form of plywood specially designed to use indoors. It is not weather-resistant, hence cannot be exposed to the elements for a long time. You will use interior plywood if you need plywood to make indoor furniture, cabinets, and flooring. However, if the flooring is likely to contact water regularly, like a bathroom, kitchen, or laundry room, you should use exterior plywood.
Brown Mesh Phenol Faced Eucalyptus/Poplar Core Plywood is designed and manufactured especially for internal applications, has an anti-slip mesh pattern on one side and a smooth film face finish on the other side. These sheets have been manufactured to high standards, making them resistant to corrosion and moisture after sealing the edges and back of the board.
Birch plywood is made from only Birch veneers. Inner veneers are thicker than outer veneers, glued and laid up in alternating directions to the required thickness. It thus provides a superbly consistent strong panel with known engineering characteristics.
18mm Blockboard is a specific form of engineered wood panel made of block-shaped pieces of albizia Falcata softwood core placed in the middle of two layers of eucalyptus grandis plywood sheets. 18mm Chinese Blockboard has a sanded face, which makes it usable in multiple different applications. 18mm Blockboard B/BB is suitable to be applied in furniture making, doors or panels, shelving, flooring underlay and non-structural various construction applications.
| 25-49 | 50+ |
| £48.55£58.26 | £45.05£54.06 |





18mm Wisa Spruce Special Softwood Plywood is a great all-around use CE2+ graded sheet. Spruce veneers allow this ply to become lightweight and suitable for multiple applications, including joinery, roofing, wall sheeting, and general DIY projects.
18mm Wisa SpruceFR softwood plywood is a Class B fire retardant structural sheet that is very sturdy and high quality. As well as structural use, it also is commonly seen in the use of load-bearing applications.
| 25-49 | 50+ |
| £65.68£78.82 | £63.83£76.60 |





18mm Anti-Slip Hexagon Pattern Eucalyptus Core Phenolic Resin Hardwood Plywood is designed and manufactured especially for internal & external applications, has an anti-slip hexagon pattern on one side and a smooth film face finish on the other side. 18mm Hexa phenolic plywood sheets have been manufactured to high standards, making them resistant to corrosion and moisture. Edges of this board are painted.