-
Buy in Bulk & Save
25-49 50+ £27.01£32.41 £26.46£31.75 
38mm Unilin U7 P6 TG2LE Tongue and Groove Chipboard Mezzanine Flooring 2400 x 600mm (8′ x 2′)
U7 is Unilin’s reinforced P6 chipboard, engineered specifically for mezzanine flooring with higher point-load capacity and stiffness. It meets the P6 threshold but is independently tested and documented well beyond it, for structural flooring performance a generic P6 board can’t guarantee.
£27.85£33.42 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
13-26 27+ £100.88£121.06 £98.28£117.94 
44mm FD30 Plywood EV Faced Lightweight Solid Door Blank Unlipped 2440 x 1220mm (8ā² x 4ā²)
Therman Plywood solid core fire door blank FD30 is fire resistant for up to 30 minutes (FD30). Solid core door blank which can be cut to suit as required and suitable for internal and external use.
£104.00£124.80 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
13-26 27+ £67.96£81.55 £62.30£74.76 
44mm FD30 Plywood EV Faced Lightweight Solid Door Blank Unlipped 2135 x 915mm (7ā² x 3ā²)
Therman Plywood solid core fire door blank FD30 is fire resistant for up to 30 minutes (FD30). Solid core door blank which can be cut to suit as required and suitable for internal and external use.
£70.79£84.95 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
11-21 22+ £109.32£131.18 £103.63£124.36 
44mm Flamebreak FD30 MDF Faced Lightweight Solid Door Blank Unlipped 2135 x 915mm (7′ x 3′)
44mm Flamebreak door blank is 6mm mdf faced and Falcatta Solid Core. Its lightweight and is fire resistant for up to 30 minutes (FD30). MDF Faced 44mm door blank is unlipped, FLEGT Licensed and q-mark certified It may be shaped or cut to suit your size needs. These doors are made for internal use only.
£113.88£136.66 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
11-21 22+ £162.00£194.40 £153.56£184.27 
44mm Flamebreak FD30 MDF Faced Lightweight Solid Door Blank Unlipped 2440 x 1220mm (8′ x 4′)
44mm Flamebreak door blank is 6mm mdf faced and Falcatta Solid Core. Its lightweight and is fire resistant for up to 30 minutes (FD30). MDF Faced 44mm door blank is unlipped, FLEGT Licensed and q-mark certified It may be shaped or cut to suit your size needs. These doors are made for internal use only.
£168.75£202.50 Ex VATInc VAT Add to cart -
SaleBuy in Bulk & Save
11-21 22+ £153.19£183.83 £143.51£172.21 
44mm Flamebreak FD30 Plywood Faced Lightweight Solid Door Blank Unlipped 2440 x 1220mm (8ā² x 4ā²)
Flamebreak 430 Plywood solid core fire door blank FD30 is fire resistant for up to 30 minutes (FD30). Solid core door blank which can be cut to suit as required and suitable for internal and external use.
Original price was: £163.88 Ex VAT (£196.66 Inc VAT).£161.25£193.50Current price is: £161.25 Ex VAT (£193.50 Inc VAT). Ex VATInc VAT Add to cart -
Buy in Bulk & Save
11-21 22+ £100.98£121.18 £94.60£113.52 
44mm Flamebreak FD30 Plywood Faced Lightweight Solid Door Blank Unlipped 2135 x 915mm (7ā² x 3ā²)
Flamebreak 430 Plywood solid core fire door blank FD30 is fire resistant for up to 30 minutes (FD30). Solid core door blank which can be cut to suit as required and suitable for internal and external use.
£106.29£127.55 Ex VATInc VAT Add to cart -
SaleBuy in Bulk & Save
13-26 27+ £92.14£110.57 £89.77£107.72 
44mm FD30 White Plywood Faced Lightweight Solid Door Blank Unlipped 2440 x 1220mm (8ā² x 4ā²)
44mm Therman Plywood solid core fire door blank FD30 is fire resistant for up to 30 minutes (FD30). Solid core door blank which can be cut to suit as required and suitable for internal and external use.
Original price was: £102.41 Ex VAT (£122.89 Inc VAT).£94.99£113.99Current price is: £94.99 Ex VAT (£113.99 Inc VAT). Ex VATInc VAT Add to cart -
Buy in Bulk & Save
13-26 27+ £62.45£74.94 £60.84£73.01 
44mm FD30 White Plywood Faced Lightweight Solid Door Blank Unlipped 2135 x 915mm (7ā² x 3ā²)
44mm Therman Plywood solid core fire door blank FD30 is fire resistant for up to 30 minutes (FD30). Solid core door blank which can be cut to suit as required and suitable for internal and external use.
£64.38£77.26 Ex VATInc VAT Add to cart -
SaleBuy in Bulk & Save
5-9 10+ £271.18£325.42 £256.91£308.29 44mm Flamebreak FD30 Plywood Faced Lightweight Solid Door Blank Unlipped 3050 x 1220mm (10ā² x 4ā²)
Flamebreak 430 Plywood solid core fire door blank FD30 is fire resistant for up to 30 minutes (FD30). Solid core door blank which can be cut to suit as required and suitable for internal and external use.
Original price was: £290.80 Ex VAT (£348.96 Inc VAT).£285.45£342.54Current price is: £285.45 Ex VAT (£342.54 Inc VAT). Ex VATInc VAT Add to cart -
SaleBuy in Bulk & Save
11-21 22+ £141.54£169.85 £134.09£160.91 44mm Flamebreak FD30 Plywood Faced Lightweight Solid Door Blank Unlipped 2440 x 915mm (8ā² x 3ā²)
Flamebreak 430 Plywood solid core fire door blank FD30 is fire resistant for up to 30 minutes (FD30). Solid core door blank which can be cut to suit as required and suitable for internal and external use.
Original price was: £159.02 Ex VAT (£190.82 Inc VAT).£148.99£178.79Current price is: £148.99 Ex VAT (£178.79 Inc VAT). Ex VATInc VAT Add to cart -
SaleBuy in Bulk & Save
11-21 22+ £117.32£140.78 £111.14£133.37 
44mm Flamebreak FD30 Plywood Faced Lightweight Solid Door Blank Pre-Lipped 2040 x 726mm (6.7ā² x 2.4ā²)
Flamebreak 430 Plywood solid core pre-lipped fire door blank FD30 is fire resistant for up to 30 minutes (FD30). 44mm Solid core door blank with lipping, gives a protective layer for the edges and some extra to trim before you get to the core.
Original price was: £135.52 Ex VAT (£162.62 Inc VAT).£123.49£148.19Current price is: £123.49 Ex VAT (£148.19 Inc VAT). Ex VATInc VAT Add to cart -
SaleBuy in Bulk & Save
12-21 22+ £114.95£137.94 £109.02£130.82 44mm Flamebreak FD30 Plywood Faced Lightweight Solid Door Blank Pre-Lipped 1981 x 838mm (6.5ā² x 2.7ā²)
Flamebreak 430 Plywood solid core pre-lipped fire door blank FD30 is fire resistant for up to 30 minutes (FD30). 44mm Solid core door blank with lipping, gives a protective layer for the edges and some extra to trim before you get to the core.
Original price was: £123.50 Ex VAT (£148.20 Inc VAT).£118.50£142.20Current price is: £118.50 Ex VAT (£142.20 Inc VAT). Ex VATInc VAT Add to cart -
Buy in Bulk & Save
11-21 22+ £142.98£171.58 £135.46£162.55 44mm Flamebreak FD30 MDF Faced Lightweight Solid Door Blank Unlipped 2440 x 915mm (8′ x 3′)
44mm Flamebreak door blank FF630 is 6mm mdf faced and Falcatta Solid Core. Its lightweight and is fire resistant for up to 30 minutes (FD30). MDF Faced 44mm door blank is unlipped, FLEGT Licensed and q-mark certified It may be shaped or cut to suit your size needs. These doors are made for internal use only.
£150.51£180.61 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
5-9 10+ £205.47£246.56 £194.65£233.58 
44mm Halspan Optima FD30 Graduated Density Chipboard Door Core Unlipped 2800 x 1830mm (9.1ā² x 6ā²)
44mm Halspan Optima door blank uses a graduated-density chipboard core with integral facings. Itās unlipped, lightweight and fire-resistant for up to 30 minutes (FD30). Supplied with square-edge and is for internal use only.
£216.28£259.54 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
5-9 10+ £46.08£55.30 £43.66£52.39 
EVERYDAY LOW PRICEEveryday Low Price label means that we promise our customers consistently low prices on products without having to wait for sales events.There are 1 more imagesIron On Oak Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging White Oak 50mm x 50m tape strip to cover the edge of oak veneered MDF, Chipboard or Plywood. To apply the veneered edging strip,Ā heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£48.51£58.21 Ex VATInc VAT Add to cart -
Iron On Black Walnut Veneer Edging Tape Strip 50mm x 50m
The Black Walnut Veneer Edging tape is pre-glued and comes in a 50mm width and 0.6mm thickness. Iron on the edging tape strip to your exposed edge and trim off the excess. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£55.50£66.60 Ex VATInc VAT Add to cart -
Iron On Birch Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Birch 50mm x 50m tape strip to cover the edge of birch veneered Plywood or MDF, Chipboard or Plywood. To apply the veneered edging strip,Ā heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£31.25£37.50 Ex VATInc VAT Add to cart -
Iron On Cherry Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Cherry 50mm x 50m tape strip to cover the edge of cherry veneered MDF, Chipboard or Plywood. To apply the veneered edging strip,Ā heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£29.50£35.40 Ex VATInc VAT Add to cart -
Iron On Maple Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Maple 50mm x 50m tape strip to cover the edge of maple veneered MDF, Chipboard or Plywood. To apply the veneered edging strip,Ā heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£31.25£37.50 Ex VATInc VAT Add to cart -
Iron On Pine Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Pine 50mm x 50m tape strip to cover the edge of pine veneered MDF, Chipboard or Plywood. To apply the veneered edging strip,Ā heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£28.37£34.04 Ex VATInc VAT Add to cart -
Iron On Sapele Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Sapele 50mm x 50m tape strip to cover the edge of sapele veneered MDF, Chipboard or Plywood. To apply the veneered edging strip,Ā heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£27.75£33.30 Ex VATInc VAT Add to cart -
Iron On Steamed Beech Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Steamed Beech 30mm x 50m tape strip to cover the edge of steamed beech veneered MDF, Chipboard or Plywood. To apply the veneered edging strip,Ā heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£27.95£33.54 Ex VATInc VAT Add to cart -
Iron On Cedar of Lebanon Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Cedar 50mm x 50m tape strip to cover the edge of cedar veneered Plywood or MDF, Chipboard or Plywood. To apply the veneered edging strip,Ā heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£54.81£65.77 Ex VATInc VAT Add to cart -
Iron On Chestnut Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Chestnut 50mm x 50m tape strip to cover the edge of chestnut veneered MDF, Chipboard or Plywood. To apply the veneered edging strip,Ā heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£62.50£75.00 Ex VATInc VAT Add to cart -
Iron On Ebony Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Ebony 50mm x 50m tape strip to cover the edge of ebony veneered MDF, Chipboard or Plywood. To apply the veneered edging strip,Ā heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£147.79£177.35 Ex VATInc VAT Add to cart -
Iron On Elm Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Elm 50mm x 50m tape strip to cover the edge of elm veneered MDF, Chipboard or Plywood. To apply the veneered edging strip,Ā heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£61.79£74.15 Ex VATInc VAT Add to cart -
Iron On Iroko Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Iroko 50mm x 50m tape strip to cover the edge of Iroko veneered MDF, Chipboard or Plywood. To apply the veneered edging strip,Ā heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£39.95£47.94 Ex VATInc VAT Add to cart -
Iron On Red Oak Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Red Oak 50mm x 50m tape strip to cover the edge of red oak veneered MDF, Chipboard or Plywood. To apply the veneered edging strip,Ā heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£31.95£38.34 Ex VATInc VAT Add to cart -
Iron On Teak Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Teak 50mm x 50m tape strip to cover the edge of teak veneered MDF, Chipboard or Plywood. To apply the veneered edging strip,Ā heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£71.68£86.02 Ex VATInc VAT Add to cart -
Iron On Wenge Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Wenge 50mm x 50m tape strip to cover the edge of wenge veneered MDF, Chipboard or Plywood. To apply the veneered edging strip,Ā heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£62.95£75.54 Ex VATInc VAT Add to cart -
Iron On Zebrano Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Zebrano 50mm x 50m tape strip to cover the edge of zebrano veneered MDF, Chipboard or Plywood. To apply the veneered edging strip,Ā heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£74.95£89.94 Ex VATInc VAT Add to cart -
Iron On Engineered Ebony Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Engineered Ebony 50mm x 50m tape strip to cover the edge of Engineered ebony veneered MDF, Chipboard or Plywood. To apply the veneered edging strip,Ā heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£55.95£67.14 Ex VATInc VAT Add to cart -
Iron On Rosewood Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Rosewood 50mm x 50m tape strip to cover the edge of rosewood veneered MDF, Chipboard or Plywood. To apply the veneered edging strip,Ā heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£99.95£119.94 Ex VATInc VAT Add to cart -
Iron On Anegre Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Anegre 50mm x 50m tape strip to cover the edge of anegre veneered MDF, Chipboard or Plywood. To apply the veneered edging strip,Ā heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£32.95£39.54 Ex VATInc VAT Add to cart -
Unglued Black Walnut Veneer Edging Tape Strip 50mm x 100m
The Black Walnut Veneer Edging tape is unglued and comes in a 50mm width and 0.6mm thickness. Apply the glue to the edging tape strip back side, press to the corner of the sheet and trim off the excess.
£92.03£110.44 Ex VATInc VAT Add to cart
Our specialist stores
Our specialist stores
