Walnut Flexible Wood Veneer Quarter Cut Long Grain 2440 x 1220mm (8′ x 4′)
Please note, the product may vary slightly in texture and colour from your screen.
SKU: SM8750
Flexible Veneer Sheets in black Walnut offers rich brown base with caramel and darker coffee tones. Natural wood sheets can be bent easily to follow curves and contours, or can be used on MDF sheets to be pressed or glued, bringing warmth to interior finishes – ideal for cabinets, wall panels, or bespoke joinery with a soft, inviting wood tone.
×
Cutting waste allowance
Allow extra material for cutting waste.
Coverage per item:2.980000000000 m²
Total area
Areas deducted
Net area to cover
Product face dimensions
Joint size
Effective coverage per sheet
Sheets before wastage
Wastage allowance
Final sheets required
Sheets per pack
Packs required
This calculator estimates the number of sheets required based on the total area entered and the selected waste allowance. It does not account for cutting layout, surface shape, board direction, joints, openings, installation method, or whether offcuts can be reused. These factors may increase or reduce the quantity required.
Area-based estimate. Check your cutting layout and installation requirements before ordering.
Enter your measurements to calculate the quantity.
The average delivery lead time for the majority of orders is 1-3 working days from the date of your order, however, it could extend to 5 working days on rare occasions or when you order products with extended lead times. Once the order has been placed, customers receive a text message and email confirmation, along with a tracking link, 24 hours before delivery. Only Palletline and Moffett customers are contacted directly by a member of staff. The next day delivery is available within M25 on orders placed on the day before 11AM, for other locations next day deliveries are available at the additional cost for orders placed before 11AM.
There is no Minimum order value, and we deliver nationwide:
Zone 1: Up to 1,000kg in weight – £50 ex VAT (Van delivery) 1,000 – 24,000kg – £125 ex VAT per load (Moffett delivery)
Zone 2: Up to 1,000kg in weight – £70 ex VAT (Van delivery) 1,000kg and above in weight (up to 2,000kg) – £100 ex VAT (Palletline) 1,000 – 24,000kg – £150 ex VAT per load (Moffett delivery)
Zone 3: Up to 1,000kg in weight – £90 ex VAT (Van delivery) 1,000kg and above in weight (up to 2,000kg) – £100 ex VAT (Palletline) 1,000 – 24,000kg – £250 ex VAT per load (Moffett delivery)
Zone 4: Custom delivery costs are calculated at checkout based on your postcode. (Palletline) 6,000kg MAX weight for orders to zone 4.
Moffett note* When ordering above the 24,000kg vehicle limit, you will be charged for separate Moffett delivery automatically. For example: You require a 30,000kg delivery to Zone 1: you will be charged £125 ex VAT x2, totalling £250 ex VAT for delivery.
+-
If you are placing order for large sheets (10x5 or 10x4) to zone 4 you may encounter delivery restrictions, in this case - please click on the “Save & Share cart” button at the cart stage, select the email option and send it to[email protected] or call us on 0203 856 8578. We will get back with a delivery quote to you shortly.
Flexible Veneer Sheets in black Walnut offers rich brown base with caramel and darker coffee tones. Natural wood sheets can be bent easily to follow curves and contours, or can be used on MDF sheets to be pressed or glued, bringing warmth to interior finishes – ideal for cabinets, wall panels, or bespoke joinery with a soft, inviting wood tone.
The Black Walnut Veneer Edging tape is pre-glued and comes in a 50mm width and 0.6mm thickness. Iron on the edging tape strip to your exposed edge and trim off the excess. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
The Black Walnut Veneer Edging tape is pre-glued and comes in a 22mm width and 0.6mm thickness. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
The Black Walnut Veneer Edging tape is unglued and comes in a 22mm width and 0.6mm thickness. Iron on the edging tape strip to your exposed edge and trim off the excess.
The Black Walnut Veneer Edging tape is unglued and comes in a 30mm width and 0.6mm thickness. Iron on the edging tape strip to your exposed edge and trim off the excess.
The Black Walnut Veneer Edging tape is pre-glued and comes in a 30mm width and 0.6mm thickness. Iron on the edging tape strip to your exposed edge and trim off the excess. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
The Black Walnut Veneer Edging tape is unglued and comes in a 50mm width and 0.6mm thickness. Apply the glue to the edging tape strip back side, press to the corner of the sheet and trim off the excess.
The Black Walnut Veneer Edging tape is pre-glued and comes in a 30mm width and 0.6mm thickness. Iron on the edging tape strip to your exposed edge and trim off the excess. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
The Black Walnut Veneer Edging tape is unglued and comes in a 30mm width and 0.6mm thickness. Iron on the edging tape strip to your exposed edge and trim off the excess.
The Black Walnut Veneer Edging tape is unglued and comes in a 50mm width and 0.6mm thickness. Apply the glue to the edging tape strip back side, press to the corner of the sheet and trim off the excess.
The Black Walnut Veneer Edging tape is pre-glued and comes in a 22mm width and 0.6mm thickness. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
The Black Walnut Veneer Edging tape is pre-glued and comes in a 50mm width and 0.6mm thickness. Iron on the edging tape strip to your exposed edge and trim off the excess. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
The Black Walnut Veneer Edging tape is unglued and comes in a 22mm width and 0.6mm thickness. Iron on the edging tape strip to your exposed edge and trim off the excess.
MDF 25mm is a composite panel product consisting of cellulosic fibres compressed with a synthetic resin or other ideal bonding system and joined together under extreme heat and pressure. For light carpentry projects, such as shelving and trim, 25mm MDF can be excellent.
18mm OSB 3 with Tongue and Groove profiling is versatile, BBA approved and water-resistant timber panel suitable for load-bearing roofing and flooring applications in dry and humid conditions.
12mm phenolic resin impregnated film is pressed on both surfaces of the board under high pressure and temperature, smooth on one surface and a textured pattern is pressed onto the other.
18mm Hardwood Eucalyptus faced structural plywood is used in permanent structures where the board is likely to be used in humid or interior conditions. This high-grade structural panel is less prone to bending and twisting and, with its excellent strength to weight ratio, makes it versatile and easy to handle.