Description
18mm Egger U699 ST9 Fir Green Melamine Faced Chipboard 2800 x 2070mm is manufactured in the UK by Egger, part of the Green Unicolours range within Egger’s wider Uni Colours collection.
Colour and surface
Fir Green is a very dark shade of green, deep enough to read as a near-black colour rather than a bright or leafy green. That richness gives it real presence, rather than coming across as just another dark neutral. ST9 Smoothtouch Matt gives the surface a velvety, even feel with no shine at all. Tested to EN 14323, the surface holds a stain resistance rating of 3 or higher, so everyday marks and spills wipe away without damaging the finish.
Construction and performance
The chipboard core is faced on both sides with resin-impregnated decorative paper pressed into a durable melamine surface, finished with a square cut edge ready for banding. Fire behaviour is classified D-s2,d0 under EN 13501-1, and the formaldehyde level meets E05. The panel can be cut, drilled and machined using suitable woodworking equipment, with exposed edges finished using matching U699 ST9 ABS edging. It is intended for dry interior applications. It can be used for kitchen cabinets and furniture, but should not be installed where the board or exposed edges will be subject to persistent moisture, standing water or direct wetting.
Where to use it
18mm Egger board U699 ST9 Fir Green MFC suits a wide range of interior fit-out work:
- Kitchen cabinet fronts wanting a rich, statement colour.
- Media units and TV cabinetry in a dark, contemporary living space.
- Fitted wardrobe doors in a bold, considered bedroom.
- Home bar or drinks cabinet fronts with real depth.
- Open shelving where a dark tone anchors the room.
Fir Green is also available as a matching U699 ST9 ABS edging tape, unglued and supplied in 0.8mm and 2mm thicknesses for hot melt edgebanding machines.