MDF Edging Tape

Pre-glued Veneer Edging Cedar 30mm x 50m tape strip to cover the edge of cedar veneered Plywood or MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.

Pre-glued Veneer Edging Cherry 30mm x 50m tape strip to cover the edge of cherry veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.

Pre-glued Veneer Edging Elm 30mm x 50m tape strip to cover the edge of elm veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.

Pre-glued Veneer Edging Iroko 30mm x 50m tape strip to cover the edge of Iroko veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.

Pre-glued Veneer Edging Red Oak 30mm x 50m tape strip to cover the edge of red oak veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.

Pre-glued Veneer Edging Sapele 30mm x 50m tape strip to cover the edge of sapele veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.

Pre-glued Veneer Edging Zebrano 30mm x 50m tape strip to cover the edge of zebrano veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.

Pre-glued Veneer Edging Engineered Ebony 30mm x 50m tape strip to cover the edge of engineered ebony veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.

The Black Walnut Veneer Edging tape is pre-glued and comes in a 50mm width and 0.5mm thickness. Iron on the edging tape strip to your exposed edge and trim off the excess. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.