Sheet Materials
... Read more
Showing 737–768 of 843 results
-
12mm Brown Mesh Phenol Faced Poplar Core Plywood 2440mm x 1220mm (8′ X 4′)
Brown Mesh Phenol Faced Poplar Core Plywood is designed and manufactured especially for internal & external applications, has an anti-slip mesh pattern on one side and a smooth film face finish on the other side. These sheets have been manufactured to high standards, making them resistant to corrosion and moisture after sealing the edges and back of the board.
POA Get a quote -
12mm Fire Retardant Paged Polish Pine Softwood Plywood Euroclass B 2440mm x 1220mm (8′ x 4′) FSC®
12mm Softwood Fire retardant plywood uses a treatment process to treat each layer separately, giving it a clean look and making it sturdy. Where applied, the FRT plywood will char when on fire but will not burn. Thus, it can significantly reduce the progress of a fire.
POA Get a quote -
12mm Indonesian Mujur Keruing Faced Meranti Core Marine Plywood BB/BB BS 1088 2440mm x 1220mm (8′ x 4′)
It is excellent hardwood plywood engineered with waterproof glue. This plywood is not chemically treated; therefore, it is not resistant to rot. 12mm Marine plywood mujur has good grades, are robust, lightweight and defect-free.
POA Get a quote -
12mm Radiata Pine Faced Poplar Core Softwood Plywood C+/C CE2+ 2440mm x 1220mm (8′ x 4′) FSC®
12mm Radiata Pine Faced Softwood plywood, or shuttering plywood, is a rough grade sheet used as an inexpensive carpentry material. This is well-suited to applications such as roofing, wall construction, or general joinery.
POA Get a quote -
12mm Eucalyptus Core Dark Brown Hexagon Pattern Anti Slip Phenolic Faced Film Plywood 2440mm X 1220mm (8′ X 4′) FSC®
12mm Anti-Slip Hexagon Pattern Mesh Eucalyptus Core Phenolic Resin Hardwood Plywood is designed and manufactured especially for internal & external applications, has an anti-slip mesh pattern on one side and a smooth film face finish on the other side. 12mm Hexa phenolic mesh plywood sheets have been manufactured to high standards, making them resistant to corrosion and moisture. Edges of this board are sealed.
POA Get a quote -
12mm Durelis VapourBlock P5 Moisture Resistant Chipboard Airtight Vapour Control Coating 2400mm x 1196mm (8′ x 4′) FSC® Load of 1080
12mm VapourBlock Moisture-resistant P5 board by Durelis is airtight and has a vapour-control layer on top of it. Very often in big construction sites you will see them used within humid conditions and they are often used specifically for walls, timber frames and racking boards.
POA Get a quote -
12mm Eucalyptus Core Anti Slip Mesh Phenolic Film Plywood 2440mm X 1220mm (8′ X 4′) FSC®
Anti-Slip Mesh Eucalyptus Core Phenolic Resin Hardwood Plywood is designed and manufactured especially for internal & external applications, has an anti-slip mesh pattern on one side and a smooth film face finish on the other side. These sheets have been manufactured to high standards, making them resistant to corrosion and moisture after sealing the edges and back of the board.
POA Get a quote -
12mm Bead & Butt Unprimed Long Grooved Fire Retardant MDF 2440mm x 1220mm (8′ X 4′) FSC®
A unprimed fire resistant MDF with Richmond profile style grooves (101.6mm centres) running along with the board, creating an excellent panelling effect for walls and ceilings. This product is also available in 9mm;12mm;15mm;18mm;25mm. The long grooved board has grooves running along the length of the sheet, 2440mm.
POA Get a quote -
12mm V Grooved Primed Long Grooved Fire Retardant MDF 2440mm x 1220mm (8′ X 4′) FSC®
A pre-primed fire resistant MDF with v-grooved profile style grooves (101.6mm centres) running along with the board, creating an excellent panelling effect for walls and ceilings. This product is also available in 9mm;12mm;15mm;18mm;25mm. The long grooved board has grooves running along the length of the sheet, 2440mm.
POA Get a quote -
13mm V-Grooved Oak Veneered Black MDF 2 Sides Crown Cut 2440mm x 1220mm (8′ x 4′)
13mm V-Grooved Oak Veneered Black MDF 2 Sides Crown Cut 2440mm x 1220mm (8′ x 4′)
POA Get a quote -
13mm Oak Veneered Birch Plywood 2 Sides Crown Cut A/B Grade 2440mm x 1220mm (8′ x 4′)
Oak Birch sheets 13mm glued to the wood surface increases the beauty and charm of the furniture that no other decorative panels can. This is a much stronger and more durable version of the veneered board. The 13mm veneered Plywood has a good quality reverse veneer, making it suitable for applications when both sides of the board are visible.
Veneered Sheets (A/B) is made up of quality natural wood veneers bonded to premium Birch plywood.
POA Get a quote -
15mm Birch Plywood Throughout BB/CP 2440mm x 1220mm (8′ x 4′) FSC®
Birch plywood is made from only Birch veneers of the same thickness, glued and laid up in alternating directions to the required thickness. It thus provides a superbly consistent strong panel with known engineering characteristics.
POA Get a quote -
15mm Chinese Hardwood Face Eucalyptus Poplar Core External Grade Plywood B/BB CE2+ 3050mm x 1220mm (10′ x 4′)
Hardwood faced structural plywood is used in permanent structures where the board is likely to be used in humid or interior conditions. This high-grade structural panel is less prone to bending and twisting and, with its excellent strength to weight ratio, makes it versatile and easy to handle.
POA Get a quote -
15mm Malaysian Hardwood Keruing Core External Grade Plywood BB/CC 2440mm x 1220mm (8′ x 4′)
Our Malaysian structural plywood provides homeowners and merchants with a superior solution for interior and exterior applications using the highest quality tropical species. Remember to seal the sheets before using them externally ( i.e. exposed to weather conditions).
POA Get a quote -
15mm Chinese Hardwood Q Mark External Grade Plywood B/BB CE2+ 2440mm x 1220mm (8′ x 4′)
Q Mark Hardwood Plywood is used in structural applications such as walls, flooring and roofing, and areas such as shop-fitting and bookcases. It comprises thin layers of wood that are glued together, creating a more durable and stable wood sheet. It can be used externally once it has been sealed with oil-based paint.
POA Get a quote -
15mm Chinese Internal Grade Hardwood Plywood BB/CC CE2+ 2440mm x 1220mm (8′ x 4′)
Interior plywood is a form of plywood specially designed to use indoors. This grade of plywood provides infills and fillers. While not weather-resistant, it excels in indoor and roof applications. For areas exposed to regular water contact, like bathrooms and kitchens, explore our weather-resistant Exterior Plywood. Perfect for concealed installations in floors, walls, and roofs, it ensures robust structural support. However, please note that it is not intended for decorative purposes.
POA Get a quote -
15mm Chinese Pinex/Pine+ Poplar Pine Structural Softwood Plywood 2440mm x 1220mm (8′ x 4′)
Delivering a very high structural performance, these panels are not repaired and may have composed faces and backs. They offer a perfect solution for applications such as roof sheathing, sidewalls, subflooring, crating, packing, pallet components, etc.
POA Get a quote -
15mm Birch Plywood Throughout BB/WG 2440mm x 1220mm (8′ x 4′)
Birch plywood is made from only Birch veneers of the same thickness, glued and laid up in alternating directions to the required thickness. It thus provides a superbly consistent strong panel with known engineering characteristics.
POA Get a quote -
15mm OSB3 Board 2400mm x 1200mm (8′ x 4′) FSC®
OSB3 is an engineered, load-bearing wood-based panel product, free of knots and voids, and suitable for structural use in humid situations.
POA Get a quote -
16mm Maple Veneered MDF 2 Sides Crown Cut A/B Grade 2440mm x 1220mm (8′ x 4′)
Maple MDF sheets 16mm glued to the wood surface increase the beauty and charm of the furniture that no other decorative panels can. The 16mm maple veneered MDF has a good quality reverse veneer, making it suitable for applications when both sides of the board are visible.
Veneered MDF (A/B) is made up of quality natural wood veneers bonded to premium MDF.
POA Get a quote -
17.5mm MDO Film Faced Plywood (Paper One Side, Film Other Side) 2440mm x 1220mm (8′ x 4′)
Tulsa MDO323 products are manufactured 100% quality Radiata Pine veneers covered with the main face of 370gms/m2 MDO paper, and back of 120-130gms/m2 film with a phenolic resin content of 35%. Tulsa overlay panels provide high-quality finish answers for hardness, water-resistance and behavioural stability. With these characteristics, Tulsa overlay panels are designed to allow the end-user the opportunity for a high number of re-uses. With proper handling, care and treatment with an appropriate chemical reactive release agent, the contractor can achieve as many as 10 re-uses. FSC® Certified.
POA Get a quote -
18mm Birch Plywood Throughout BB/CP 2440mm x 1220mm (8′ x 4′) FSC®
Birch plywood is made from only Birch veneers of the same thickness, glued and laid up in alternating directions to the required thickness. It thus provides a superbly consistent strong panel with known engineering characteristics.
POA Get a quote -
18mm Egger Peel Clean Xtra P5 Tongue and Groove Moisture Resistant Chipboard Flooring TG4E 2400mm x 600mm (8′ x 2′) FSC®
18mm Tongue and Groove Chipboard, commonly known as P5 is a structural grade flooring board highly regarded by builders because of its moisture-resistant properties. 18mm T&G flooring chipboard is typically utilised in flooring applications.
POA Get a quote -
18mm Radiata Pine Faced Poplar Core Softwood Plywood C+/C CE2+ 2440mm x 1220mm (8′ x 4′) FSC®
18mm Radiata Pine Faced Softwood plywood, or shuttering plywood, is a rough grade sheet used as an inexpensive carpentry material. This is well-suited to applications such as roofing, wall construction, or general joinery.
POA Get a quote -
18mm Chinese Hardwood Q Mark External Grade Plywood B/BB CE2+ 2440mm x 1220mm (8′ x 4′)
Q Mark Hardwood Plywood is used in structural applications such as walls, flooring and roofing, and areas such as shop-fitting and bookcases. It comprises thin layers of wood that are glued together, creating a more durable and stable wood sheet. It can be used externally once it has been sealed with oil-based paint.
POA Get a quote -
18mm Elliotis Pine Plywood Builders Grade 2440mm x 1220mm (8′ x 4′)
Softwood plywood is mainly produced utilising Elliottis Pine but other species such as Southern Yellow Pine and Spruce are also used depending on the country of manufacture. As a general utility plywood it has many and varied end uses including site hoarding, flooring, stud walling and packaging to name but a few.
POA Get a quote -
18mm Durelis P5 Tongue and Groove Moisture Resistant Chipboard Flooring TG4E 2400mm x 600mm (8′ x 2′)
18mm P5 tongue and groove chipboard is a moisture-resistant structural grade flooring board. It is generally used in flooring applications as the board’s construction adds strength when panels are slotted together and screwed or nailed down to floor joists.
POA Get a quote -
18mm Formwork Plywood EKOPINE BCX Structural Pine 2440mm x 1220mm (8′ x 4′)
18mm Formwork plywood is a type of plywood used in construction to create a temporary mold or “form” for pouring concrete. 18mm Formwork plywood is typically made from high-quality, moisture-resistant plywood that can withstand the weight of wet concrete and the pressure of the concrete’s expansion as it dries.
POA Get a quote -
18mm Elliottis Ekopine CPC CE2+ Plywood 2440mm x 1220mm (8′ x 4′)
Softwood plywood is mainly produced utilising Elliottis Pine but other species such as Southern Yellow Pine and Spruce are also used depending on the country of manufacture. As general utility plywood it has many and varied ends uses including site hoarding, flooring, stud walling and packaging to name but a few.
Please note the majority of the sheets may have a warped or bowed shape.
POA Get a quote -
18mm Formwork Plywood Poplar Core Film Faced Both Sides 2500mm x 1250mm (8.2′ x 4.1′)
Film faced plywood is also called formwork plywood, concrete form. Film faced plywood is the special plywood with two sides coated with a wearable and waterproof film. The film is adhesive impregnated paper, different from melamine paper overlay, PVC, MDO and HDO. The function of the film is to protect the inside wood from moisture, water, weather and extend the plywood’s service life. Film faced plywood can be used in the harsh and outside environment: formwork plywood, concrete formwork, floorboard, vehicle building.
PLEASE NOTE:
- The majority of the boards will have branding on both sides of the board.
POA Get a quote -
18mm OSB 3 TG4E Tongue & Groove Flooring Board 2440mm x 590mm (8′ x 1.94′) Pack of 102
OSB3 with Tongue and Groove profiling is versatile, BBA approved and water-resistant timber panel suitable for load-bearing roofing and flooring applications in dry and humid conditions.
POA Get a quote -
18mm Durelis P5 Tongue and Groove Moisture Resistant Chipboard Flooring TG4E 2400mm x 600mm (8′ x 2′) Full Load 1400 boards
18mm P5 tongue and groove chipboard is a moisture-resistant structural grade flooring board. It is generally used in flooring applications as the board’s construction adds strength when panels are slotted together and screwed or nailed down to floor joists.
POA Get a quote
