Sheet Materials
-
Plasterboard (5)
-
Fixings & Accessories (15)
-
Tongue And Groove Boards (34)
-
Loft Boards (24)
-
Timber (20)
-
Sheet Materials For Sale (59)
-
Blockboard (1)
-
Wall Panels (37)
-
Wood Veneers (175)
-
Flooring Board (40)
-
Chipboard (55)
-
Door Blank (45)
-
Furniture Board (363)
-
Hardboard (6)
-
Fire Board (50)
-
Cement & Non-Combustible Boards (17)
-
MDF (538)
-
Melamine Board (25)
-
OSB Board (23)
-
Plywood (262)
Showing 833–864 of 1007 results
-
Iron On Teak Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Teak 50mm x 50m tape strip to cover the edge of teak veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£71.68£86.02 Ex VATInc VAT Add to cart -
Iron On Wenge Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Wenge 50mm x 50m tape strip to cover the edge of wenge veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£62.95£75.54 Ex VATInc VAT Add to cart -
Iron On Zebrano Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Zebrano 50mm x 50m tape strip to cover the edge of zebrano veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£74.95£89.94 Ex VATInc VAT Add to cart -
Iron On Engineered Ebony Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Engineered Ebony 50mm x 50m tape strip to cover the edge of Engineered ebony veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£55.95£67.14 Ex VATInc VAT Add to cart -
Iron On Rosewood Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Rosewood 50mm x 50m tape strip to cover the edge of rosewood veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£99.95£119.94 Ex VATInc VAT Add to cart -
Iron On Anegre Veneer Edging Tape Strip 50mm x 50m
Pre-glued Veneer Edging Anegre 50mm x 50m tape strip to cover the edge of anegre veneered MDF, Chipboard or Plywood. To apply the veneered edging strip, heat the iron, press the veneered edging onto the surface, smooth it with a roller, trim the excess, and sand the edges for a clean finish.
£32.95£39.54 Ex VATInc VAT Add to cart -
Unglued Black Walnut Veneer Edging Tape Strip 50mm x 100m
The Black Walnut Veneer Edging tape is unglued and comes in a 50mm width and 0.6mm thickness. Iron on the edging tape strip to your exposed edge and trim off the excess.
£92.03£110.44 Ex VATInc VAT Add to cart -
Unglued Oak Veneer Edging Tape Strip 50mm x 100m
Unglued Veneer Edging White Oak 50mm x 100m tape strip to cover the edge of oak veneered MDF, Chipboard or Plywood.
£74.41£89.29 Ex VATInc VAT Add to cart -
50mm Finsa MDF Board 2440 x 1220mm (8′ x 4′) FSC® Pack of 15
50mm MDF Board (also known as Medium Density Fibre) is commonly used for internal projects such as joinery, cabinet making, wardrobe, panelling, furniture and much more. MDF has a smooth and clean finish with no grain or knots and is suitable for finishing with oil, varnish or paint. The dense and lightweight board is strong and durable and can be easily fixed with glues and screws.
£1,886.20£2,263.44 Ex VATInc VAT£125.75£150.90 Per Sheet Add to cart -
50mm Finsa Ultralight MDF Board 2440 x 1220mm (8′ x 4′) FSC® Pack of 15
50mm Ultra Lightweight MDF Board (also known as Medium Density Fibre EZ 400) is commonly used for internal projects such as joinery, cabinet making, wardrobe, panelling, much more. This MDF Board is low density of approx 400kg/m3. MDF has a smooth finish with no grain or knots. The low density and lightweight board is strong and durable and can be easily fixed with glues and screws.
£1,651.27£1,981.52 Ex VATInc VAT£110.08£132.10 Per Sheet Add to cart -
47 x 50mm Treated Carcassing Timber (2” x 2”) 2400mm
Our C16 graded 2×2 timber that stays straight and strong, it is kiln dried and minimises movement. The pressure treatment resists rot and pests. It comes from a slow-grown softwood, which means a smoother finish, excellent stability and robust load performance.
£2.48£2.98 Ex VATInc VAT£1.03£1.24 Per M Add to cart -
47 x 50mm Treated Carcassing Timber (2” x 2”) 3000mm
Our C16 graded 2×2 timber that stays straight and strong, it is kiln dried and minimises movement. The pressure treatment resists rot and pests. It comes from a slow-grown softwood, which means a smoother finish, excellent stability and robust load performance.
£3.09£3.71 Ex VATInc VAT£1.03£1.24 Per M Add to cart -
47 x 50mm Treated Carcassing Timber (2” x 2”) 3600mm
Our C16 graded 2×2 timber that stays straight and strong, it is kiln dried and minimises movement. The pressure treatment resists rot and pests. It comes from a slow-grown softwood, which means a smoother finish, excellent stability and robust load performance.
£3.70£4.44 Ex VATInc VAT£1.03£1.24 Per M Add to cart -
Buy in Bulk & Save
7-14 15+ £166.25£199.50 £157.50£189.00 
50mm Premium MDF Board 2440 x 1220mm (8′ x 4′) FSC®
50mm MDF Board (also known as Medium Density Fibre) is commonly used for internal projects such as joinery, cabinet making, wardrobe, panelling, furniture and much more. MDF has a smooth and clean finish with no grain or knots and is suitable for finishing with oil, varnish or paint. The dense and lightweight board is strong and durable and can be easily fixed with glues and screws.
£175.00£210.00 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
7-14 15+ £186.96£224.35 £177.12£212.54 Available in 5-7 days50mm Premium MDF Board 3050 x 1220mm (10′ x 4′) FSC®
50mm MDF Board 10×4 (also known as Medium Density Fibre) is commonly used for internal projects such as joinery, cabinet making, wardrobe, panelling, furniture and much more. MDF has a smooth and clean finish with no grain or knots and is suitable for finishing with oil, varnish or paint. The dense and lightweight board is strong and durable and can be easily fixed with glues and screws.
£196.80£236.16 Ex VATInc VAT Add to cart -
50mm NoMorePly Fibre Cement Floor Screws Box of 250
50mm NoMorePly® Screws are made for fixing 18mm and 22mm TG4 fibre cement flooring boards. The fast-cutting tip drives easily into tough boards, while the countersinking head leaves a smooth, flush finish. Ideal for creating a strong, secure and long-lasting floor installation.
£11.45£13.74 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
9-17 18+ £145.75£174.90 £141.63£169.96 54mm Flamebreak FD60 MDF Faced Lightweight Solid Door Blank Unlipped 2135 x 915mm (7′ x 3′)
54mm Flamebreak door blank is 6mm mdf faced and Falcatta Solid Core. Its lightweight and is fire resistant for up to 60 minutes (FD60). MDF Faced 54mm door blank is unlipped, FLEGT Licensed and q-mark certified It may be shaped or cut to suit your size needs. These doors are made for internal use only.
£149.87£179.84 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
9-17 18+ £229.39£275.27 £222.91£267.49 54mm Flamebreak FD60 MDF Faced Lightweight Solid Door Blank Unlipped 2440 x 1220mm (8′ x 4′)
54mm Flamebreak door blank is 6mm mdf faced and Falcatta Solid Core. Its lightweight and is fire resistant for up to 60 minutes (FD60). MDF Faced 54mm door blank is unlipped, FLEGT Licensed and q-mark certified It may be shaped or cut to suit your size needs. These doors are made for internal use only.
£235.88£283.06 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
9-17 18+ £141.54£169.85 £131.11£157.33 54mm Flamebreak FD60 Plywood Faced Lightweight Solid Door Blank Unlipped 2135 x 915mm (7′ x 3′)
Flamebreak 660 Plywood solid core fire door blank FD60 is fire resistant for up to 60 minutes (FD60). Solid core door blank which can be cut to suit as required and suitable for internal and external use.
£148.99£178.79 Ex VATInc VAT Add to cart -
SaleBuy in Bulk & Save
9-17 18+ £206.63£247.96 £191.40£229.68 54mm Flamebreak FD60 Plywood Faced Lightweight Solid Door Blank Unlipped 2440 x 1220mm (8′ x 4′)
Flamebreak 660 Plywood solid core fire door blank FD60 is fire resistant for up to 60 minutes (FD60). Solid core door blank which can be cut to suit as required and suitable for internal and external use.
Original price was: £223.94 Ex VAT (£268.73 Inc VAT).£217.50£261.00Current price is: £217.50 Ex VAT (£261.00 Inc VAT). Ex VATInc VAT Add to cart -
54mm Halspan Optima FD60 Graduated Density Chipboard Door Core Unlipped 2135 x 915mm (7′ x 3′)
54mm Halspan Optima door blank uses a graduated-density chipboard core with integral facings. It’s unlipped and fire-resistant for up to 60 minutes (FD60). Supplied square-edged (unlipped), ready for sizing and application of hardwood lippings; for internal use only.
£98.51£118.21 Ex VATInc VAT Add to cart -
54mm Halspan Optima FD60 Graduated Density Chipboard Door Core Unlipped 2440 x 915mm (8′ x 3′)
54mm Halspan Optima door blank uses a graduated-density chipboard core with integral facings. It’s unlipped and fire-resistant for up to 60 minutes (FD60). Supplied square-edged (unlipped), ready for sizing and application of hardwood lippings; for internal use only.
£113.75£136.50 Ex VATInc VAT Add to cart -
54mm Halspan Optima FD60 Graduated Density Chipboard Door Core Unlipped 2440 x 1220mm (8′ x 4′)
54mm Halspan Optima door blank uses a graduated-density chipboard core with integral facings. It’s unlipped and fire-resistant for up to 60 minutes (FD60). Supplied square-edged (unlipped), ready for sizing and application of hardwood lippings; for internal use only.
£150.35£180.42 Ex VATInc VAT Add to cart -
54mm Halspan Optima FD60 Graduated Density Chipboard Door Core Unlipped 2800 x 1830mm (9.1′ x 6′)
54mm Halspan Optima door blank uses a graduated-density chipboard core with integral facings. It’s unlipped and fire-resistant for up to 60 minutes (FD60). Supplied square-edged (unlipped), ready for sizing and application of hardwood lippings; for internal use only.
£287.53£345.04 Ex VATInc VAT Add to cart -
54mm Halspan Optima FD60 Oak Veneered Graduated Density Chipboard Door Core Unlipped 2135 x 915mm (7′ x 3′)
54mm Oak Veneered Halspan Optima door blank uses a graduated-density chipboard core with integral facings. It’s unlipped and fire-resistant for up to 60 minutes (FD60). Supplied square-edged (unlipped), ready for sizing and application of hardwood lippings; for internal use only.
£257.05£308.46 Ex VATInc VAT Add to cart -
54mm Halspan Optima FD60 Steamed Beech Veneered Graduated Density Chipboard Door Core Unlipped 2135 x 915mm (7′ x 3′)
54mm Steamed Beech Veneered Halspan Optima door blank uses a graduated-density chipboard core with integral facings. It’s unlipped and fire-resistant for up to 60 minutes (FD60). Supplied square-edged (unlipped), ready for sizing and application of hardwood lippings; for internal use only.
£234.42£281.30 Ex VATInc VAT Add to cart -
Unglued Oak Veneer Edging Tape Strip 55mm x 100m
Unglued Veneer Edging White Oak 55mm x 100m tape strip to cover the edge of oak veneered MDF, Chipboard or Plywood.
£81.84£98.21 Ex VATInc VAT Add to cart -
60mm Finsa MDF Board 2440 x 1220mm (8′ x 4′) FSC® Pack of 12
60mm MDF Board (also known as Medium Density Fibre) is commonly used for internal projects such as joinery, cabinet making, wardrobe, panelling, furniture and much more. MDF has a smooth and clean finish with no grain or knots and is suitable for finishing with oil, varnish or paint. The dense and lightweight board is strong and durable and can be easily fixed with glues and screws.
£2,240.62£2,688.74 Ex VATInc VAT£186.72£224.06 Per Sheet Add to cart -
38 x 63mm CLS Sawn Timber C16 Graded (3” x 2”) 2400mm
C16 CLS 3×2, is kiln-dried for controlled moisture and straightness. Sanded all round with soften edges on the timbers for less risky and easier operations. CLS 38mm x 63mm is reliable for stud walls, overall wall framing and floor lining, stable and ready for a variety of both; non-structural and structural use.
£3.15£3.78 Ex VATInc VAT£1.31£1.57 Per M Add to cart -
38 x 63mm CLS Sawn Timber C16 Graded (3” x 2”) 3000mm
C16 CLS 3×2, is kiln-dried for controlled moisture and straightness. Sanded all round with soften edges on the timbers for less risky and easier operations. CLS 38mm x 63mm is reliable for stud walls, overall wall framing and floor lining, stable and ready for a variety of both; non-structural and structural use.
£3.88£4.66 Ex VATInc VAT£1.29£1.55 Per M Add to cart -
47 x 75mm Treated Carcassing Timber (3” x 2”) 2400mm
Our C16 graded 3×2 timber that stays straight and strong, it is kiln dried and minimises movement. The pressure treatment resists rot and pests. It comes from a slow-grown softwood, which means a smoother finish, excellent stability and robust load performance.
£3.57£4.28 Ex VATInc VAT£1.49£1.79 Per M Add to cart -
47 x 75mm Treated Carcassing Timber (3” x 2”) 3000mm
Our C16 graded 3×2 timber that stays straight and strong, it is kiln dried and minimises movement. The pressure treatment resists rot and pests. It comes from a slow-grown softwood, which means a smoother finish, excellent stability and robust load performance.
£4.47£5.36 Ex VATInc VAT£1.49£1.79 Per M Add to cart
