



























Softwood plywood is mainly produced utilising Elliotis Pine but other species such as Southern Yellow Pine and Spruce are also used depending on the country of manufacture. As general utility plywood it has many and varied ends uses including site hoarding, flooring, stud walling and packaging to name but a few.
| 25-49 | 50+ |
| £48.25£57.90 | £44.70£53.64 |





It is excellent hardwood plywood engineered with waterproof glue. This plywood is not chemically treated; therefore, it is not resistant to rot. 18mm Marine plywood has good grades, are robust, lightweight and defect-free.
Hardwood faced structural plywood is used in permanent structures where the board is likely to be used in humid or interior conditions. This high-grade structural panel is less prone to bending and twisting and, with its excellent strength to weight ratio, makes it versatile and easy to handle.
| 15-29 | 30+ |
| £61.12£73.34 | £59.39£71.27 |





Hardwood faced structural combi core plywood is used in permanent structures where the board is likely to be used in humid or interior conditions. This high-grade structural panel is less prone to bending and twisting and, with its excellent strength to weight ratio, makes it versatile and easy to handle.
| 25-49 | 50+ |
| £94.22£113.06 | £91.55£109.86 |





Fire retardant plywood is not suitable for structural use and is treated using chemicals that make it unable to oxidize. It makes it hard to burn. Where applied, the FRT plywood will char when on fire but will not burn. Thus, it can significantly reduce the progress of a fire.
18mm Film-faced plywood is also called formwork plywood, concrete form. 18mm Film faced plywood is the special plywood with two sides coated with a wearable and waterproof film. The film is adhesive impregnated paper. This plywood is also known as Black plywood. The function of the film is to protect the inside wood from moisture, water, weather and extend the plywood’s service life. 18mm Film faced plywood can be used in the harsh and outside environment: formwork plywood, concrete formwork, floorboard, vehicle building.
Anti-Slip Mesh Eucalyptus Core Phenolic Resin Hardwood Plywood is designed and manufactured especially for internal & external applications, has an anti-slip mesh pattern on one side 260g/m2 and a smooth film face finish on the other side 130g/m2. These sheets have been manufactured to high standards, making them resistant to corrosion and moisture after sealing the edges and back of the board.
Birch plywood is made from only Birch veneers of the same thickness, glued and laid up in alternating directions to the required thickness. It thus provides a superbly consistent strong panel with known engineering characteristics.
Brown Mesh Phenol Faced Eucalyptus/Poplar Core Plywood is designed and manufactured especially for internal applications, has an anti-slip mesh pattern on one side and a smooth film face finish on the other side. These sheets have been manufactured to high standards, making them resistant to corrosion and moisture after sealing the edges and back of the board.
Birch plywood is made from only Birch veneers. Inner veneers are thicker than outer veneers, glued and laid up in alternating directions to the required thickness. It thus provides a superbly consistent strong panel with known engineering characteristics.
| 54-107 | 108+ |
| £22.85£27.42 | £22.37£26.84 |





18mm Softwood plywood by Selex is produced from pruned radiata pine with a class 3 glue and extraordinary strength specifications. It can be used in domestic flooring, for example, on roofs where a high level of engineering, such as high snow loading, is required.
| 25-49 | 50+ |
| £48.55£58.26 | £45.05£54.06 |





18mm Wisa Spruce Special Softwood Plywood is a great all-around use CE2+ graded sheet. Spruce veneers allow this ply to become lightweight and suitable for multiple applications, including joinery, roofing, wall sheeting, and general DIY projects.
18mm Wisa SpruceFR softwood plywood is a Class B fire retardant structural sheet that is very sturdy and high quality. As well as structural use, it also is commonly seen in the use of load-bearing applications.
| 25-49 | 50+ |
| £65.68£78.82 | £63.83£76.60 |





18mm Anti-Slip Hexagon Pattern Eucalyptus Core Phenolic Resin Hardwood Plywood is designed and manufactured especially for internal & external applications, has an anti-slip hexagon pattern on one side and a smooth film face finish on the other side. 18mm Hexa phenolic plywood sheets have been manufactured to high standards, making them resistant to corrosion and moisture. Edges of this board are sealed.
| 25-49 | 50+ |
| £29.36£35.23 | £27.82£33.38 |





18mm Chinese Eucalyptus Hardwood Plywood is a structural plywood that provides homeowners and merchants with a superior solution for interior and exterior applications using the highest quality species. Remember to seal the sheets before using them externally (i.e. exposed to weather conditions).
| 18-34 | 35+ |
| £145.88£175.06 | £141.75£170.10 |





18mm Short Grain Birch plywood is made from only 18mm Birch veneers of the same thickness, glued and laid up in alternating directions to the required thickness. It thus provides a superbly consistent strong panel with known engineering characteristics.
18mm Lumin Pine Softwood plywood of structural quality. A high-strength board that can be used both indoors and outdoors as long as it is covered with oil paints, different kinds of enamels or varnishes. Can be used in a very wide variety of building activities. Due to boards colour, allows you to achieve natural wood colour of variety of different colour or finishes.
18mm phenolic resin impregnated film Buffalo board is pressed on both surfaces of the board under high pressure and temperature, smooth on one surface and a textured pattern is pressed onto the other.
18mm phenolic resin impregnated film Buffalo board is pressed on both surfaces of the board under high pressure and temperature, smooth on one surface and a textured pattern is pressed onto the other.
18mm Double-sided White Melamine Plywood A Grade features a strong birch plywood core with a melamine layer on both sides of the board. It can be used in furniture works and general interior projects, it offers excellent strength, stability, and a clean finish.
Oak poplar plywood 18mm glued to the wood surface increases the beauty and charm of the furniture that no other decorative panels can. This is a much stronger and more durable version of the veneered board.
| 17-34 | 35+ |
| £172.95£207.54 | £169.39£203.27 |





18mm Short Grain Birch plywood is made from only 18mm Birch veneers of the same thickness, glued and laid up in alternating directions to the required thickness. It thus provides a superbly consistent strong panel with known engineering characteristics.
18mm “Koala” is an exterior grade, cost-effective, high-quality hardwood plywood, a direct alternative to a well known Jade 72. It is known that Koala has a better core and is better suited for CNC machinery. This versatile plywood that provides a good finish. It is ideal for outdoor use once sealed with a suitable coating or preservative.
| 25-49 | 50+ |
| £51.92£62.30 | £50.28£60.34 |





18mm Anti-Slip Chinese Hexagon Pattern Eucalyptus Core Phenolic Resin Hardwood Plywood is designed and manufactured especially for internal & external applications, has an anti-slip hexagon pattern on one side and a smooth film face finish on the other side. 18mm Chinese Hexa phenolic plywood sheets have been manufactured to high standards, making them resistant to corrosion and moisture. Edges of this board are sealed.
18mm phenolic resin impregnated film Buffalo board is pressed on both surfaces of the board under high pressure and temperature, smooth on one surface and a textured pattern is pressed onto the other.
18mm phenolic resin impregnated film Buffalo Riga Heksa board is pressed on both surfaces of the board under high pressure and temperature, smooth on one surface and a textured hexagon pattern is pressed onto the other.
High quality 18mm birch plywood with a factory applied decorative lacquer that’s saving your time. Ready-to-use lacquered birch plywood with smooth surface to work on your furniture, interior walls, ceilings and more applications.
18mm Garnica lightweight plywood panel manufactured from 100% European sustainable poplar. Exceptionally smooth, pale ivory surface ideal for painting, laminating, and interior fit-out.
18mm grey phenolic resin impregnated film Buffalo Riga Heksa board is pressed on both surfaces of the board under high pressure and temperature, smooth on one surface and a textured hexagon pattern is pressed onto the other.
18mm Wisa Sprucefloor is an engineered flooring panel. Produced from Nordic spruce veneers with a Class 3 exterior-grade glue and a purpose-designed tongue-and-groove profile on all four sides. It can be used in domestic and light commercial flooring, offering high strength, dimensional stability and light weight for easy handling and installation.
Oak Birch sheets 19mm glued to the wood surface increases the beauty and charm of the furniture that no other decorative panels can. This is a much stronger and more durable version of the veneered board. The 19mm veneered Plywood has a good quality reverse veneer, making it suitable for applications when both sides of the board are visible.
Veneered Sheets (A/B) is made up of quality natural wood veneers bonded to premium Birch plywood.
Oak Birch sheets 19mm glued to the wood surface increases the beauty and charm of the furniture that no other decorative panels can. This is a much stronger and more durable version of the veneered board. The 19mm veneered Plywood has a good quality reverse veneer, making it suitable for applications when both sides of the board are visible.
Veneered Sheets (A/B) is made up of quality natural wood veneers bonded to premium Birch plywood.
19mm Douglas Fir is a smooth, clear face plywood with minimal knots. Ideal for interior joinery, furniture making and decorative applications where a clean, natural wood appearance is required. Douglas Fir plywood is strong, stable, and easy to work with.
Birch plywood is made from only Birch veneers. Inner veneers are thinner than outer veneers, glued and laid up in alternating directions to the required thickness. It thus provides a superbly consistent strong panel with known engineering characteristics.
21mm phenolic resin impregnated film Buffalo board is pressed on both surfaces of the board under high pressure and temperature, smooth on one surface and a textured pattern is pressed onto the other.
Hardwood Eucalyptus faced structural plywood is used in permanent structures where the board is likely to be used in humid or interior conditions. This high-grade structural panel is less prone to bending and twisting and, with its excellent strength to weight ratio, makes it versatile and easy to handle.