Our specialist stores
Our specialist stores
Plywood Flooring
Most people focus on what they will see on the floor. The colour, the pattern, the finish. Then the floor starts to move, creak or feel uneven. Choosing the right plywood for flooring helps prevent these issues from the start. It creates a solid base that keeps everything secure.
What is plywood flooring?
Plywood flooring is an engineered board. It is made from thin layers of wood veneer that are pressed and bonded together. Each layer is laid in a different direction. This gives the board strength. It also helps it stay stable over time. It is used as a base under the final floor finish.
Sheet sizes include 2440mm x 1220mm, 2400mm x 600mm and 2425mm x 600mm. Available in thicknesses from around 3.6mm to 25mm.
Most plywood for flooring is made to recognised standards such as BS EN636. Class 2 boards are suitable for interior use in humid conditions. Class 3 boards can be used in both interior and exterior structural work and offer some resistance to moisture during construction.
The boards are usually supplied sanded and ready to use. They can be painted, varnished or stained. With an E1 rating for formaldehyde, they are suitable for indoor use. FSC-certified options are available.
Surface grades such as B/BB or BB/CC describe how the board looks. Higher grades have a cleaner surface. Lower grades may show knots and natural marks.
What is ply flooring used for?
Ply flooring is used wherever a strong, stable surface is needed before the final finish goes down. It works as a base layer fixed over joists or an existing floor.
It is also a practical option when floors are uneven or worn. Instead of replacing the whole floor, plywood sheets can be laid over the top. This helps level the surface and get it ready for laminate, vinyl, wood or carpet.
The same approach is used under tiles. Reducing movement at this stage helps prevent cracks later on. It is strong enough for daily use. At the same time, it is easy to cut, move and fix on site.
The same applies to workshops and storage areas. The floor needs to be durable, but the build should stay simple and efficient.
In some cases, it is used for raised flooring systems. This makes it easier to access cables or pipework underneath without major changes later.
The same boards can also be used for wall panelling, stair landings and some roofing applications. This depends on the specification and load requirements.
Types of plywood floorboards
The most common option is tongue and groove plywood. These panels lock into each other along the edges. This helps reduce movement, gaps and squeaks.
Square edge plywood sheets are the more flexible option. They do not interlock, so they are easier to cut and adjust on site. This makes them useful for smaller areas, repairs or jobs with a lot of detailed fitting.
In practice, most jobs come down to a simple choice. Use tongue and groove boards when you need a stronger, more fixed floor. Use standard sheets when flexibility and easy cutting matter more.
Benefits of ply floorboards
- Solid support for everyday use
- Keeps the floor steady over time
- Minimises flex and unwanted movement
- Helps create a clean, even surface
- Compatible with most floor coverings
- Fixings stay tight and secure
- Simple to work with on site
- Suitable for both small and large projects
- Performs well in typical site conditions
- Reduces the risk of future issues
Why choose our flooring plywood?
On site, you do not need surprises. You need boards that arrive on time, fit as expected and let you move on with the job. That is exactly how we approach plywood for flooring at Sheet Materials Wholesale. We keep it practical. The sheets are consistent, easy to work with and ready for real conditions, not just theory.
We focus on good prices that make sense for both small jobs and larger orders. If you are buying more, you will see it in the numbers. Our volume discounts are set up to support trade work, not slow it down with complicated deals.
Delivery matters just as much as the material. That is why we offer fast UK delivery, with Next-day delivery available on many items.
Every order is handled with real projects in mind. You get clear communication, proper documentation and a VAT invoice provided without chasing. It is the kind of detail that saves time when you are managing multiple jobs.
At Sheet Materials Wholesale, the focus is simple. Supply boards that work properly, deliver them when needed, and keep the process easy from order to installation.
FAQ
Where to buy plywood flooring?
You can order it directly from Sheet Materials Wholesale. Just go online, pick your boards and place the order in a few clicks.
What screws for plywood flooring?
Use wood screws or flooring screws, usually around 4 to 5mm thick. Length depends on your board, but as a rule, go at least 2 to 2.5 times the thickness. Don’t use nails if you want a solid, quiet floor.
How to install plywood flooring?
Start with a flat surface, that’s half the job done. Lay the sheets, don’t push them tight together, leave a small gap so they can move slightly. Then screw them down properly, not just a few fixings here and there. If it’s fixed well from the start, you won’t be going back to fix it later.
Plywood Flooring Range
Showing all 7
Products in Plywood Flooring
-
Buy in Bulk & Save
70-139 140+ £21.33£25.60 £20.21£24.25 
There are 1 more images5.5mm CFA Approved Hardwood Flooring Underlay Plywood Eucalyptus Throughout 2440 x 1220mm (8′ x 4′) FSC®
TSU-01 is a SP101 direct alternative that is CFA approved and BS 8203 meeting or exceeding many regulations. Plywood density is 585-650kg/m3 and is mainly used as flooring plywood. The veneers of this 5.5mm flooring plywood are 1.3mm thick in order to prevent blisters and weak bonds. It also is constructed of 4 veneers instead of usual 3 layers. If you are looking to save some cash with something as high-performing as SP101, this is the plywood to go for your flooring project.
£22.45£26.94 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
54-107 108+ £22.85£27.42 £22.37£26.84 
There are 1 more images18mm Chilean Tongue & Groove Radiata Pine Softwood Plywood B/C TG4 2425 x 600mm FSC®
18mm Softwood plywood by Selex is produced from pruned radiata pine with a class 3 glue and extraordinary strength specifications. It can be used in domestic flooring, for example, on roofs where a high level of engineering, such as high snow loading, is required.
£24.05£28.86 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
50-99 100+ £26.36£31.63 £25.82£30.98 
18mm WISA Sprucefloor Spruce Softwood Plywood G/III TG4 2400 x 600mm FSC®
18mm Wisa Sprucefloor is an engineered flooring panel. Produced from Nordic spruce veneers with a Class 3 exterior-grade glue and a purpose-designed tongue-and-groove profile on all four sides. It can be used in domestic and light commercial flooring, offering high strength, dimensional stability and light weight for easy handling and installation.
£27.18£32.62 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
41-81 82+ £32.74£39.29 £32.06£38.47 22mm WISA Sprucefloor Spruce Softwood Plywood G/III TG4 2400 x 600mm FSC®
22mm Wisa Sprucefloor is an engineered flooring panel. Produced from Nordic spruce veneers with a Class 3 exterior-grade glue and a purpose-designed tongue-and-groove profile on all four sides. It can be used in domestic and light commercial flooring, offering high strength, dimensional stability and light weight for easy handling and installation.
£33.75£40.50 Ex VATInc VAT Add to cart -
18mm ARAUCOPLY Tongue & Groove TG4 Chilean Radiata Pine Softwood Plywood Flooring CPC 2400 x 600mm (8′ x 2′)
Softwood plywood T&G (4) panels specifically designed for use in domestic flooring could be used, for example, on roofs where a high level of engineering, such as high snow loading, is required.
POA Get a quote -
21mm ARAUCOPLY Tongue & Groove TG2 Chilean Radiata Pine Softwood Plywood Flooring CPC 2400 x 1200mm (8′ x 4′)
Softwood Plywood is plywood which has a face and back veneer of softwood as opposed to a hardwood such as Birch, Maple, Oak, etc. Softwood plywood panels are comprised of a core made from either softwood then faced and backed with a veneer of soft wood and therefore are used for structural applications.
POA Get a quote -
Buy in Bulk & Save
44-87 88+ £26.08£31.30 £24.16£28.99 
There are 1 more images22mm Chilean Tongue & Groove Radiata Pine Softwood Plywood B/C TG4 2425 x 600mm FSC®
22mm Softwood plywood by Selex is produced from pruned radiata pine with a class 3 glue and extraordinary strength specifications. It can be used in domestic flooring, for example, on roofs where a high level of engineering, such as high snow loading, is required.
£27.45£32.94 Ex VATInc VAT Get restock alert
