18mm Egger F237 ST76 Cupria Slate Melamine Faced Chipboard 2800 x 2070mm

18mm Egger F237 ST76 Cupria Slate Melamine Faced Chipboard 2800 x 2070mm
18mm Egger F237 ST76 Cupria Slate Melamine Faced Chipboard 2800 x 2070mm
18mm Egger F237 ST76 Cupria Slate Melamine Faced Chipboard 2800 x 2070mm

Please note, the product may vary slightly in texture and colour from your screen.

SKU: SM5295
Brand: Egger

18mm Egger board MFC F237 ST76 Cupria Slate is a decorative stone-effect board that swaps the usual cold slate grey for a warm copper undertone. Its ST76 Mineral Rough Matt texture is pressed into the surface, not printed on. Suited to kitchen cabinets, feature walls and fittings paired with bronze or copper hardware.

Colour: Cupria Slate
Show more
Finish: Mineral Rough Matt
Show more
£113.45£136.14 Ex VATInc VAT

Available in 3-5 days

+-
Buy in Bulk & Save
Buy in Bulk & Save
14-27 28+
£110.05£132.06 £107.78£129.34
Lead Time: 3-5 days

The average delivery lead time for the majority of orders is 1-3 working days from the date of your order, however, it could extend to 5 working days on rare occasions or when you order products with extended lead times. Once the order has been placed, customers receive a text message and email confirmation, along with a tracking link, 24 hours before delivery. Only Palletline and Moffett customers are contacted directly by a member of staff. The next day delivery is available within M25 on orders placed on the day before 11AM, for other locations next day deliveries are available at the additional cost for orders placed before 11AM.

There is no Minimum order value, and we deliver nationwide:

  • Zone 1:
    Up to 1,000kg in weight โ€“ ยฃ50 ex VAT (Van delivery)
    1,000 โ€“ 24,000kgย  โ€“ ยฃ125 ex VAT per load (Moffett delivery)
  • Zone 2:
    Up to 1,000kg in weight โ€“ ยฃ70 ex VAT (Van delivery)
    1,000kg and above in weight (up to 2,000kg) โ€“ ยฃ100 ex VAT (Palletline)
    1,000 โ€“ 24,000kg โ€“ ยฃ150 ex VAT per load (Moffett delivery)
  • Zone 3:
    Up to 1,000kg in weight โ€“ ยฃ90 ex VAT (Van delivery)
    1,000kg and above in weight (up to 2,000kg) โ€“ ยฃ100 ex VAT (Palletline)
    1,000 โ€“ 24,000kg โ€“ ยฃ250 ex VAT per load (Moffett delivery)
  • Zone 4:
    Custom delivery costs are calculated at checkout based on your postcode. (Palletline)
    6,000kg MAX weight for orders to zone 4.

Moffett note*
When ordering above the 24,000kg vehicle limit, you will be charged for separate Moffett delivery automatically. For example: You require a 30,000kg delivery to Zone 1: you will be charged ยฃ125 ex VAT x2, totalling ยฃ250 ex VAT for delivery.

Delivery map
+ -

If you are placing order for large sheets (10x5 or 10x4) to zone 4 you may encounter delivery restrictions, in this case - please click on the โ€œSave & Share cartโ€ button at the cart stage, select the email option and send it to [email protected] or call us on 0203 856 8578. We will get back with a delivery quote to you shortly.

See Full Transport Policy
Order sample

18mm Egger board MFC F237 ST76 Cupria Slate is a decorative stone-effect board that swaps the usual cold slate grey for a warm copper undertone. Its ST76 Mineral Rough Matt texture is pressed into the surface, not printed on. Suited to kitchen cabinets, feature walls and fittings paired with bronze or copper hardware.

  • Additional information

    Brand Egger
    Weight 70 kg
    Thickness

    18mm
    Size

    2800 x 2070mm
    Applications

    Cabinets, Closet systems, Furniture, Office, Shelving, Wall panelling
    Class

    Carb2
    Country of origin

    UK
    Edging

    Square cut
    Features

    Cuttable, Lacquerable
    Finish

    Mineral Rough Matt
    Colour

    Cupria Slate
    Colour Tone

    Anthracite/Near-Black
    Fire rating

    Euroclass D-s2,d0
    Formaldehyde level

    E05
    Grade

    Chipboard
    Moisture resistant

    No
    Product standard

    Non structural
    Veneer

    Melamine
    Weather exposure

    Interior
    Surface finish

    Material and metal

  • Description

    18mm Egger F237 ST76 Cupria Slate Melamine Faced Chipboard 2800 x 2070mm is manufactured in the UK by Egger, part of the Anthracite Unicolours range within Egger’s wider Uni Colours collection.

    Colour and Surface
    Cupria Slate carries copper running through its dark base tone, a detail that sets it apart from cooler slate reproductions. That warmth doesn’t cost it any depth. It still reads as genuine stone rather than a flat colour. The copper undertone pairs naturally with bronze, copper or reddish wood finishes, materials that would otherwise clash against a flat black slate. Touch the surface and ST76 Mineral Rough Matt stays true to real stone, coarse and uneven rather than smoothed over.

    Construction and Performance
    This non-structural chipboard core is faced on both sides with resin-impregnated decorative paper pressed into a durable melamine surface, finished with a square cut edge ready for banding. Fire behaviour is classified D-s2,d0 under EN 13501-1, and the formaldehyde level meets E05. The panel can be cut, drilled and machined using suitable woodworking equipment, with exposed edges finished using matching F237 ST76 ABS edging. It is intended for dry interior applications. It can be used for kitchen cabinets and furniture, but should not be installed where the board or exposed edges will be subject to persistent moisture, standing water or direct wetting.

    Where to Use It
    18mm Egger board F237 ST76 Cupria Slate MFC suits a wide range of interior fit-out work:

    • Feature walls paired with copper or brass fittings and lighting
    • Kitchen island fronts alongside reddish or warm-toned wood worktops
    • Office desking and partition panels with a warm metallic palette
    • Shelving units finished to match copper or bronze hardware

    Cupria Slate is also stocked as a matching ABS edging tape, unglued and supplied in 0.8mm and 2mm thicknesses for hot melt edgebanding machines.

  • Datasheet

    Download

    Cleaning & Care Recommendations

    Download

    Environmental and health data sheet

    Download

  • Questions and answers of the customers

    There are no questions yet. Be the first to ask a question about this product.

    Send me a notification for each new answer.
    1. Q What makes Cupria Slate different from a standard black slate decor?
      A

      Most slate reproductions lean cold, staying close to a true black or dark grey. Cupria Slate carries a genuine copper warmth through its base tone instead, giving it a richer, more inviting character while keeping the same stone-like texture and depth.
    2. Q Does the rough ST76 texture wear down or smooth out with regular handling over time?
      A

      Not under normal use. The texture is pressed into the board during manufacture rather than sprayed or coated on top, so day-to-day handling and cleaning won't flatten it out. Years down the line, it should still feel much the same.
    3. Q Does the rough texture make cutting or edging more difficult than a flat panel?
      A

      Not really. Standard saws and edgebanding tools handle it the same way they'd handle a flat panel, and the matching edging tape sits cleanly over the cut regardless of the surface texture. No special equipment needed.
    4. Q Can a groove or rebate be routed into this panel for a sliding door track?
      A

      Yes, it routes cleanly with standard woodworking equipment. A sharp cutter helps avoid chipping the surface along the routed edge.
    5. Q Does this panel need to acclimatise in the room before it's fixed permanently?
      A

      It's good practice to let it sit in the room for a day or so beforehand, letting it settle to the local temperature and humidity, especially in a newly plastered or recently heated space.

Related products

  • Buy in Bulk & Save
    49-95 96+
    £13.56£16.27 £13.28£15.94
    6mm Premium Moisture Resistant MDF Board 2440 x 1220mm (8' x 4') FSCยฎ

    6mm Premium Moisture Resistant MDF Board 2440 x 1220mm (8′ x 4′) FSCยฎ

    Moisture resistant MDF 6mm is particularly suitable for construction applications that need panels, with high load-bearing capacity and moisture resistance and for a wide range of interior applications.

    £13.98£16.78 Ex VATInc VAT Add to cart
  • Buy in Bulk & Save
    25-49 50+
    £20.75£24.90 £19.46£23.35
    18mm Chinese Eucalyptus Face Poplar Core External Grade Plywood B/BB CE2+ 2440 x 1220mm (8โ€ฒ X 4โ€ฒ)2440 x 1220 x 18mm Chinese Alpha Ply Eucalyptus Faced Poplar Core Hardwood Plywood B_BB Class 2-22440 x 1220 x 18mm Chinese Alpha Ply Eucalyptus Faced Poplar Core Hardwood Plywood B_BB Class 2-32440 x 1220 x 18mm Chinese Alpha Ply Eucalyptus Faced Poplar Core Hardwood Plywood B_BB Class 2-42440 x 1220 x 18mm Chinese Alpha Ply Eucalyptus Faced Poplar Core Hardwood Plywood B_BB Class 2-5

    18mm Chinese Eucalyptus Face Poplar Core External Grade Plywood B/BB CE2+ 2440 x 1220mm (8โ€ฒ X 4โ€ฒ)

    18mm Hardwood Eucalyptus faced structural plywood is used in permanent structures where the board is likely to be used in humid or interior conditions. This high-grade structural panel is less prone to bending and twisting and, with its excellent strength to weight ratio, makes it versatile and easy to handle.

    £21.39£25.67 Ex VATInc VAT Add to cart
  • Buy in Bulk & Save
    75-149 150+
    £9.42£11.30 £9.16£10.99
    6mm Premium MDF Board 2440 x 1220mm (8' x 4') FSCยฎIMG_9737IMG_9738IMG_0177IMG_0178

    6mm Premium MDF Board 2440 x 1220mm (8′ x 4′) FSCยฎ

    MDF 6mm is a composite panel product consisting of cellulosic fibres compressed with a synthetic resin or other ideal bonding system and joined together under extreme heat and pressure. For light carpentry projects, such as shelving and trim, 6mm MDF can be excellent.

    £9.69£11.63 Ex VATInc VAT Add to cart
  • Buy in Bulk & Save
    26-49 50+
    £19.20£23.04 £18.80£22.56
    18mm SmartPly OSB 3 Board 2440 x 1220mm (8' x 4') FSCยฎ2440 x 1220 x 18mm Smartply Max OSB3 FSCยฎ-22440 x 1220 x 18mm Smartply Max OSB3 FSCยฎ-32440 x 1220 x 18mm Smartply Max OSB3 FSCยฎ-42440 x 1220 x 18mm Smartply SiteProtect Pre-Primed 1 Side OSB3 FSCยฎ-5

    18mm SmartPly OSB 3 Board 2440 x 1220mm (8′ x 4′) FSCยฎ

    18mm Smartply OSB3 is an engineered, load-bearing wood-based panel product, free of knots and voids, and suitable for structural use in humid situations.

    £19.79£23.75 Ex VATInc VAT Add to cart