19mm Egger U960 TM Onyx Grey Lacquered Melamine Faced Chipboard 2800 x 2070mm FSC®

19mm Egger U960 TM Onyx Grey Lacquered Melamine Faced Chipboard 2800 x 2070mm FSC®
19mm Egger U960 TM Onyx Grey Lacquered Melamine Faced Chipboard 2800 x 2070mm FSC®
19mm Egger U960 TM Onyx Grey Lacquered Melamine Faced Chipboard 2800 x 2070mm FSC®

Please note, the product may vary slightly in texture and colour from your screen.

SKU: SM3904
Brand: Egger

19mm Egger board MFC U960 TM Onyx Grey Lacquered has the deep, warm tone of poured concrete. TM is Egger’s PerfectSense Matt lacquer, giving a matt finish that resists fingerprints. Rated by Egger for vertical use only, so it suits cabinet fronts, doors and panelling.

Colour: Onyx Grey
Show more
Finish: PerfectSense Matt lacquered
Show more
£132.25£158.70 Ex VATInc VAT

Available in 3-5 days

+-
Buy in Bulk & Save
Buy in Bulk & Save
12-23 24+
£128.28£153.94 £125.64£150.77
Lead Time: 3-5 days

The average delivery lead time for the majority of orders is 1-3 working days from the date of your order, however, it could extend to 5 working days on rare occasions or when you order products with extended lead times. Once the order has been placed, customers receive a text message and email confirmation, along with a tracking link, 24 hours before delivery. Only Palletline and Moffett customers are contacted directly by a member of staff. The next day delivery is available within M25 on orders placed on the day before 11AM, for other locations next day deliveries are available at the additional cost for orders placed before 11AM.

There is no Minimum order value, and we deliver nationwide:

  • Zone 1:
    Up to 1,000kg in weight – £50 ex VAT (Van delivery)
    1,000 – 24,000kg  – £125 ex VAT per load (Moffett delivery)
  • Zone 2:
    Up to 1,000kg in weight – £70 ex VAT (Van delivery)
    1,000kg and above in weight (up to 2,000kg) – £100 ex VAT (Palletline)
    1,000 – 24,000kg – £150 ex VAT per load (Moffett delivery)
  • Zone 3:
    Up to 1,000kg in weight – £90 ex VAT (Van delivery)
    1,000kg and above in weight (up to 2,000kg) – £100 ex VAT (Palletline)
    1,000 – 24,000kg – £250 ex VAT per load (Moffett delivery)
  • Zone 4:
    Custom delivery costs are calculated at checkout based on your postcode. (Palletline)
    6,000kg MAX weight for orders to zone 4.

Moffett note*
When ordering above the 24,000kg vehicle limit, you will be charged for separate Moffett delivery automatically. For example: You require a 30,000kg delivery to Zone 1: you will be charged £125 ex VAT x2, totalling £250 ex VAT for delivery.

Delivery map
+ -

If you are placing order for large sheets (10x5 or 10x4) to zone 4 you may encounter delivery restrictions, in this case - please click on the “Save & Share cart” button at the cart stage, select the email option and send it to [email protected] or call us on 0203 856 8578. We will get back with a delivery quote to you shortly.

See Full Transport Policy
Order sample

19mm Egger board MFC U960 TM Onyx Grey Lacquered has the deep, warm tone of poured concrete. TM is Egger’s PerfectSense Matt lacquer, giving a matt finish that resists fingerprints. Rated by Egger for vertical use only, so it suits cabinet fronts, doors and panelling.

  • Additional information

    Brand Egger
    Weight 70 kg
    Thickness

    19mm
    Size

    2800 x 2070mm
    Applications

    Cabinets, Closet systems, Furniture, Office, Shelving, Wall panelling
    Class

    Carb2
    Country of origin

    Germany
    Edging

    Square cut
    Features

    Anti-fingerprint, Cuttable
    Finish

    PerfectSense Matt lacquered
    Colour

    Onyx Grey
    Colour Tone

    Grey
    Fire rating

    Euroclass D-s2,d0
    Formaldehyde level

    E05
    Grade

    Chipboard
    Moisture resistant

    No
    Product standard

    Non structural
    Veneer

    Melamine
    Weather exposure

    Interior
    Surface finish

    Matt texture

  • Description

    Colour and surface
    Onyx Grey is a warmer grey from the dark end of the range, with a tone that brings concrete to mind. The PerfectSense Matt lacquer adds a soft, velvety layer on top of the decor. It cuts down reflections, so the grey comes through clearly instead of being washed out by shine.

    The finish is matt to the touch. It brings a modern edge to a scheme and works well alongside woodgrain decors or white marble decors with grey veining. The anti-fingerprint properties of the lacquer keep handling marks down, which helps on doors and drawer fronts that are touched every day. As with any dark decor, marks show more easily than on a light one, so wipe it with a soft, slightly damp cloth.

    Construction and performance
    The 19mm chipboard core is faced on both sides with resin-impregnated decorative paper pressed into a durable melamine surface, with the PerfectSense matt lacquer bonded on top of the visible face as the finished surface. The reverse is plain melamine without the lacquer. The board is a non-structural panel with a square cut edge ready for banding. Fire behaviour is classified D-s2,d0 under EN 13501-1, and the formaldehyde level meets E05. This TM lacquer is rated for vertical applications only and is not suitable for horizontal surfaces such as worktops, desktops or shelving. The panel can be cut, drilled and machined using suitable woodworking equipment. It is intended for dry interior applications. It can be used for kitchen cabinets and furniture, but should not be installed where the board or exposed edges will be subject to persistent moisture, standing water or direct wetting.

    Where to use it
    19mm Egger board U960 TM Onyx Grey Lacquered MFC suits a range of interior fit-out work:

    • Kitchen island fronts styled to look like poured concrete, without the weight
    • Media wall panels and TV unit fronts where a low-reflection surface cuts glare
    • Home bar or drinks cabinet fronts paired with brass or matt black fittings
    • Under-stair storage fronts
    • Built-in wardrobe doors in a minimalist, matt bedroom scheme
    • Office storage and cupboard fronts that call for an industrial, concrete-like look with a matt finish

    A colour-matched U960 TM ABS edging tape is available for this decor, supplied unglued in 1mm thickness for use with hot melt edgebanding machines.

  • Datasheet

    Download

  • Questions and answers of the customers

    There are no questions yet. Be the first to ask a question about this product.

    Send me a notification for each new answer.
    1. Q What’s the difference between this lacquered Onyx Grey and a standard melamine panel?
      A

      This board has Egger’s PerfectSense Matt lacquer on the visible face rather than the standard melamine surface. The lacquer keeps reflections lower, which suits a concrete-effect decor well, and it adds anti-fingerprint properties that a standard melamine finish does not have. 
    2. Q Can I use it for a shelf or another horizontal surface?
      A

      No. Egger rates TM lacquer for vertical applications only, so it is not intended for shelves, worktops, desktops or other horizontal surfaces.
    3. Q Are there any precautions when cutting and machining it?
      A

      Use sharp blades and tooling and support the sheet fully, so the face does not chip along the cut. Keep the lacquered face clear of swarf and rough surfaces while you work.
    4. Q Can abrasive cleaners or furniture polish change the matt finish?
      A

      Yes, they can. Abrasive cleaners and rough sponges can leave gloss marks, and polishes or waxes build a sticky layer that holds dirt. Wipe the surface with a soft, slightly damp cloth instead, then dry it with a microfibre cloth.
  • Why our customers stay with us

    Most of our orders come from customers who’ve bought before. Here’s why they keep coming back, drawn straight from their reviews.

    Customer service
    Expert advice from knowledgeable sheet material specialists
    Delivery speed
    Fast, reliable delivery nationwide
    Product range
    One of the UK's widest ranges of sheet materials in stock
    Wholesale prices
    Competitive trade pricing for all customers
    Trade credit
    Buy now, pay later option
    Sourcing
    FSC® certified products available across the range
    Click & Collect
    Click & Collect ready within 1 hour on stocked items
    Offloading services
    Choose van or Moffett offload to suit your site
    Open to business & public
    Anyone can order: trade and public alike, no account needed
    Rated excellent

    With thousands of successfully completed deliveries to building sites and our customers’ homes, we’re trusted to deliver the right product at the right price, on time, backed by a dedicated customer support team.

    Trustpilot · Over 2600 positive reviewsReviews.io · Over 1800 positive reviews
    We have 3 stores offering Bricks, Sheet Materials and Insulation, with access to 1000s of product lines.
    Across all three stores we’ve delivered 100,000+ orders to happy customers since 2019.