18mm Egger U125 ST9 Sand Yellow Melamine Faced Chipboard 2800 x 2070mm

18mm Egger U125 ST9 Sand Yellow Melamine Faced Chipboard 2800 x 2070mm
18mm Egger U125 ST9 Sand Yellow Melamine Faced Chipboard 2800 x 2070mm
18mm Egger U125 ST9 Sand Yellow Melamine Faced Chipboard 2800 x 2070mm

Please note, the product may vary slightly in texture and colour from your screen.

SKU: SM7539
Brand: Egger

18mm Egger board MFC U125 ST9 Sand Yellow is a muted yellow, softened by a hint of grey. It reads warm and colourful without being loud. ST9 is Egger’s Smoothtouch Matt texture, giving the surface a soft, matt feel. Suits kitchen cabinet fronts and furniture wanting a gentle pop of colour.

Colour: Sand Yellow
Show more
Finish: Smoothtouch Matt
Show more
£99.85£119.82 Ex VATInc VAT

Available in 3-5 days

+-
Buy in Bulk & Save
Buy in Bulk & Save
14-27 28+
£96.85£116.22 £94.86£113.83
Lead Time: 3-5 days

The average delivery lead time for the majority of orders is 1-3 working days from the date of your order, however, it could extend to 5 working days on rare occasions or when you order products with extended lead times. Once the order has been placed, customers receive a text message and email confirmation, along with a tracking link, 24 hours before delivery. Only Palletline and Moffett customers are contacted directly by a member of staff. The next day delivery is available within M25 on orders placed on the day before 11AM, for other locations next day deliveries are available at the additional cost for orders placed before 11AM.

There is no Minimum order value, and we deliver nationwide:

  • Zone 1:
    Up to 1,000kg in weight โ€“ ยฃ50 ex VAT (Van delivery)
    1,000 โ€“ 24,000kgย  โ€“ ยฃ125 ex VAT per load (Moffett delivery)
  • Zone 2:
    Up to 1,000kg in weight โ€“ ยฃ70 ex VAT (Van delivery)
    1,000kg and above in weight (up to 2,000kg) โ€“ ยฃ100 ex VAT (Palletline)
    1,000 โ€“ 24,000kg โ€“ ยฃ150 ex VAT per load (Moffett delivery)
  • Zone 3:
    Up to 1,000kg in weight โ€“ ยฃ90 ex VAT (Van delivery)
    1,000kg and above in weight (up to 2,000kg) โ€“ ยฃ100 ex VAT (Palletline)
    1,000 โ€“ 24,000kg โ€“ ยฃ250 ex VAT per load (Moffett delivery)
  • Zone 4:
    Custom delivery costs are calculated at checkout based on your postcode. (Palletline)
    6,000kg MAX weight for orders to zone 4.

Moffett note*
When ordering above the 24,000kg vehicle limit, you will be charged for separate Moffett delivery automatically. For example: You require a 30,000kg delivery to Zone 1: you will be charged ยฃ125 ex VAT x2, totalling ยฃ250 ex VAT for delivery.

Delivery map
+ -

If you are placing order for large sheets (10x5 or 10x4) to zone 4 you may encounter delivery restrictions, in this case - please click on the โ€œSave & Share cartโ€ button at the cart stage, select the email option and send it to [email protected] or call us on 0203 856 8578. We will get back with a delivery quote to you shortly.

See Full Transport Policy
Order sample

18mm Egger board MFC U125 ST9 Sand Yellow is a muted yellow, softened by a hint of grey. It reads warm and colourful without being loud. ST9 is Egger’s Smoothtouch Matt texture, giving the surface a soft, matt feel. Suits kitchen cabinet fronts and furniture wanting a gentle pop of colour.

  • Additional information

    Brand Egger
    Weight 70 kg
    Thickness

    18mm
    Size

    2800 x 2070mm
    Applications

    Cabinets, Closet systems, Furniture, Office, Shelving, Wall panelling
    Class

    Carb2
    Country of origin

    UK
    Edging

    Square cut
    Features

    Cuttable, Lacquerable
    Finish

    Smoothtouch Matt
    Colour

    Sand Yellow
    Colour Tone

    Beige/Cream
    Fire rating

    Euroclass D-s2,d0
    Formaldehyde level

    E05
    Grade

    Chipboard
    Moisture resistant

    No
    Product standard

    Non structural
    Veneer

    Melamine
    Weather exposure

    Interior
    Surface finish

    Smooth texture

  • Description

    18mm Egger U125 ST9 Sand Yellow Melamine Faced Chipboard 2800 x 2070mm is manufactured in the UK by Egger, part of the Beige Unicolours range within Egger’s wider Uni Colours collection.

    Colour and Surface
    Sand Yellow carries a genuine yellow undertone, muted just enough by a trace of grey that it reads warm and characterful rather than bold or bright. That restraint is what makes it versatile, working as a main colour on its own without dominating a room. ST9 Smoothtouch Matt keeps that character grounded with a velvety, non-reflective surface. Tested to EN 14323, the surface holds a stain resistance rating of 3 or higher, so everyday marks in a busy kitchen don’t become a lasting problem.

    Construction and Performance
    This 18mm chipboard core is faced on both sides with resin-impregnated decorative paper pressed into a durable melamine surface, finished with a square cut edge ready for banding. Fire behaviour is classified D-s2,d0 under EN 13501-1, and the formaldehyde level meets E05. It is intended for dry interior applications. It can be used for kitchen cabinets and furniture, but should not be installed where the board or exposed edges will be subject to persistent moisture, standing water or direct wetting.

    Where to Use It
    18mm Egger board U125 ST9 Sand Yellow MFC suits a range of interior fit-out work:

    • Kitchen cabinet fronts for a soft pop of colour
    • Children’s bedroom or playroom furniture wanting warmth without brightness
    • Office storage and shelving for a calm, characterful workspace
    • Fitted wardrobe doors in a warm, considered bedroom scheme
    • Built-in wardrobe interiors finished to match the visible fronts
    • Feature wall panelling for a subtle accent wall

    A colour matched ABS edging tape is available for this decor, supplied unglued in 0.8mm and 2mm thicknesses for use with hot melt edgebanding machines.

  • Datasheet

    Download

    Cleaning & Care Recommendations

    Download

    Environmental and health data sheet

    Download

  • Questions and answers of the customers

    There are no questions yet. Be the first to ask a question about this product.

    Send me a notification for each new answer.
    1. Q Does Sand Yellow read as a genuine colour, or does it look more like an off-white?
      A

      It reads as a genuine, if muted, yellow rather than an off-white. The grey undertone softens it, but there's still enough colour present that it registers clearly as yellow rather than blending into a neutral palette.
    2. Q Is Sand Yellow a good choice for a children's room, or does the colour skew too mature?
      A

      It works either way, since the muted tone avoids reading as a strictly childish bright yellow while still bringing genuine warmth and colour into the space, so it can suit a child's room now and still look considered as the room's use changes over time.
    3. Q Does the ST9 surface feel different from a completely smooth, glossy panel?
      A

      Yes, noticeably. It has a velvety matt feel rather than a slick, reflective surface, which is part of why it reads as characterful rather than flat or plasticky.
    4. Q Can this panel be used for open shelving in a kitchen, not just closed cabinets?
      A

      Yes, it works well for both. The consistent colour and finish across the sheet mean open shelves and closed cabinet fronts match seamlessly if used together in the same kitchen.
    5. Q Can this panel be cut into narrow strips, like for shelving edges, without the colour looking uneven?
      A

      Yes. The colour runs consistently across the full decorative face, so narrow cut strips show the same tone as a full panel, without patchiness or colour drift.

Related products

  • Buy in Bulk & Save
    37-74 75+
    £20.85£25.02 £19.34£23.21
    12mm Premium Moisture Resistant MDF Board 2440 x 1220mm (8' x 4') FSCยฎ2440 x 1220 x 12mm Finsa Fibrapan H Forma Moisture Resistant MDF FSCยฎ-22440 x 1220 x 12mm Finsa Fibrapan H Forma Moisture Resistant MDF FSCยฎ-32440 x 1220 x 12mm Finsa Fibrapan H Forma Moisture Resistant MDF FSCยฎ-42440 x 1220 x 12mm Finsa Fibrapan H Forma Moisture Resistant MDF FSCยฎ-5

    12mm Premium Moisture Resistant MDF Board 2440 x 1220mm (8′ x 4′) FSCยฎ

    Moisture resistant MDF 12mm is particularly suitable for construction applications that need panels, with high load-bearing capacity and moisture resistance and for a wide range of interior applications.

    £21.49£25.79 Ex VATInc VAT Add to cart
  • Buy in Bulk & Save
    50-99 100+
    £16.13£19.36 £14.26£17.11
    9mm Premium Moisture Resistant MDF Board 2440 x 1220mm (8' x 4') FSCยฎIMG_9684IMG_9685IMG_0022IMG_0023

    9mm Premium Moisture Resistant MDF Board 2440 x 1220mm (8′ x 4′) FSCยฎ

    Moisture resistant MDF 9mm is particularly suitable for construction applications that need panels, with high load-bearing capacity and moisture resistance and for a wide range of interior applications.

    £16.98£20.38 Ex VATInc VAT Add to cart
  • Buy in Bulk & Save
    10-19 20+
    £30.12£36.14 £28.88£34.66
    Sale 38mm Finsa SuperPan Tech P6 TG+ Tongue and Groove Chipboard Mezzanine Flooring 2400 x 600mm (8' x 2') FSCยฎ2400 x 600 x 38mm Finsa SuperPan Tech P6 SA Mezzanine Flooring Chipboard FSCยฎ-22400 x 600 x 38mm Finsa SuperPan Tech P6 SA Mezzanine Flooring Chipboard FSCยฎ-32400 x 600 x 38mm Finsa SuperPan Tech P6 SA Mezzanine Flooring Chipboard FSCยฎ-42400 x 600 x 38mm Finsa SuperPan Tech P6 SA Mezzanine Flooring Chipboard FSCยฎ-5

    38mm Finsa SuperPan Tech P6 TG+ Tongue and Groove Chipboard Mezzanine Flooring 2400 x 600mm (8′ x 2′) FSCยฎ

    38mm Finsaโ€™s SuperPan P6 TG+ Flooring system is an innovative, next-generation board that has a unique composition comprising of two external MDF faces with a chipboard core which is without comparison in the market currently.

    Original price was: £33.43 Ex VAT (£40.12 Inc VAT).Current price is: £31.05 Ex VAT (£37.26 Inc VAT). Ex VATInc VAT Add to cart
  • 12mm Faced Birch Core Brown Anti Slip Mesh Phenolic Film Plywood 2440 X 1220mm (8โ€ฒ X 4โ€ฒ)
    SPECIAL ORDER
    IMG_9700IMG_9701

    12mm Faced Birch Core Brown Anti Slip Mesh Phenolic Film Plywood 2440 X 1220mm (8โ€ฒ X 4โ€ฒ)

    12mm phenolic resin impregnated film is pressed on both surfaces of the board under high pressure and temperature, smooth on one surface and a textured pattern is pressed onto the other.

    POA Get a quote