18mm Egger U222 ST9 Crema Beige Melamine Faced Chipboard 2800 x 2070mm

18mm Egger U222 ST9 Crema Beige Melamine Faced Chipboard 2800 x 2070mm
18mm Egger U222 ST9 Crema Beige Melamine Faced Chipboard 2800 x 2070mm
18mm Egger U222 ST9 Crema Beige Melamine Faced Chipboard 2800 x 2070mm

Please note, the product may vary slightly in texture and colour from your screen.

SKU: SM3012
Brand: Egger

18mm Egger board MFC U222 ST9 Crema Beige is one of Egger’s most popular kitchen colours, sometimes referred to as Magnolia. Warm and neutral, it combines with almost any wood tone for a cosy, classic feel. ST9 is Egger’s Smoothtouch Matt texture, keeping the surface soft to the touch. Suited to kitchen cabinet fronts and units.

Colour: Crema Beige
Show more
Finish: Smoothtouch Matt
Show more
£80.10£96.12 Ex VATInc VAT

Available in 3-5 days

+-
Buy in Bulk & Save
Buy in Bulk & Save
14-27 28+
£77.70£93.24 £76.10£91.32
Lead Time: 3-5 days

The average delivery lead time for the majority of orders is 1-3 working days from the date of your order, however, it could extend to 5 working days on rare occasions or when you order products with extended lead times. Once the order has been placed, customers receive a text message and email confirmation, along with a tracking link, 24 hours before delivery. Only Palletline and Moffett customers are contacted directly by a member of staff. The next day delivery is available within M25 on orders placed on the day before 11AM, for other locations next day deliveries are available at the additional cost for orders placed before 11AM.

There is no Minimum order value, and we deliver nationwide:

  • Zone 1:
    Up to 1,000kg in weight โ€“ ยฃ50 ex VAT (Van delivery)
    1,000 โ€“ 24,000kgย  โ€“ ยฃ125 ex VAT per load (Moffett delivery)
  • Zone 2:
    Up to 1,000kg in weight โ€“ ยฃ70 ex VAT (Van delivery)
    1,000kg and above in weight (up to 2,000kg) โ€“ ยฃ100 ex VAT (Palletline)
    1,000 โ€“ 24,000kg โ€“ ยฃ150 ex VAT per load (Moffett delivery)
  • Zone 3:
    Up to 1,000kg in weight โ€“ ยฃ90 ex VAT (Van delivery)
    1,000kg and above in weight (up to 2,000kg) โ€“ ยฃ100 ex VAT (Palletline)
    1,000 โ€“ 24,000kg โ€“ ยฃ250 ex VAT per load (Moffett delivery)
  • Zone 4:
    Custom delivery costs are calculated at checkout based on your postcode. (Palletline)
    6,000kg MAX weight for orders to zone 4.

Moffett note*
When ordering above the 24,000kg vehicle limit, you will be charged for separate Moffett delivery automatically. For example: You require a 30,000kg delivery to Zone 1: you will be charged ยฃ125 ex VAT x2, totalling ยฃ250 ex VAT for delivery.

Delivery map
+ -

If you are placing order for large sheets (10x5 or 10x4) to zone 4 you may encounter delivery restrictions, in this case - please click on the โ€œSave & Share cartโ€ button at the cart stage, select the email option and send it to [email protected] or call us on 0203 856 8578. We will get back with a delivery quote to you shortly.

See Full Transport Policy
Order sample

18mm Egger board MFC U222 ST9 Crema Beige is one of Egger’s most popular kitchen colours, sometimes referred to as Magnolia. Warm and neutral, it combines with almost any wood tone for a cosy, classic feel. ST9 is Egger’s Smoothtouch Matt texture, keeping the surface soft to the touch. Suited to kitchen cabinet fronts and units.

  • Additional information

    Brand Egger
    Weight 70 kg
    Thickness

    18mm
    Size

    2800 x 2070mm
    Applications

    Cabinets, Closet systems, Furniture, Office, Shelving, Wall panelling
    Class

    Carb2
    Country of origin

    UK
    Edging

    Square cut
    Features

    Cuttable, Lacquerable
    Finish

    Smoothtouch Matt
    Colour

    Crema Beige
    Colour Tone

    Beige/Cream
    Fire rating

    Euroclass D-s2,d0
    Formaldehyde level

    E05
    Grade

    Chipboard
    Moisture resistant

    No
    Product standard

    Non structural
    Veneer

    Melamine
    Weather exposure

    Interior
    Surface finish

    Smooth texture

  • Description

    18mm Egger U222 ST9 Crema Beige Melamine Faced Chipboard 2800 x 2070mmย  is manufactured in the UK by Egger, part of the Beige Unicolours range within Egger’s wider Uni Colours collection.

    Colour and Surface
    Crema Beige carries the warmth of a classic kitchen colour without tipping into yellow or orange, sometimes referred to by the paint-tone name Magnolia. It’s one of Egger’s most popular kitchen decors, combining comfortably with almost any wood tone for a cosy, classic feel. The ST9 Smoothtouch Matt surface feels smooth and even to the touch, warm rather than cold. Tested to EN 14323, the surface holds a stain resistance rating of 3 or higher, so everyday kitchen marks wipe away without damaging the finish.

    Construction and Performance
    Non-structural chipboard forms the core here, faced on both sides with resin-impregnated decorative paper pressed into a durable melamine surface, and finished with a square-cut edge ready for banding. Fire behaviour is classified D-s2,d0 under EN 13501-1, and the formaldehyde level meets E05. It is intended for dry interior applications. It can be used for kitchen cabinets and furniture, but should not be installed where the board or exposed edges will be subject to persistent moisture, standing water or direct wetting.

    Where to Use It
    18mm Egger board U222 ST9 Crema Beige MFC suits a range of interior fit-out work:

    • Kitchen cabinet fronts and drawer fronts in a classic, warm palette
    • Utility room and boot room cabinetry
    • Office storage units in soft, neutral colour schemes
    • Fitted wardrobe doors in a timeless bedroom scheme
    • Open shelving in kitchens and living spaces alike
    • Larder cupboard interiors and pantry storage

    A colour matched ABS edging tape is available for this decor, supplied unglued in 0.8mm and 2mm thicknesses for use with hot melt edgebanding machines.

  • Datasheet

    Download

    Cleaning & Care Recommendations

    Download

    Environmental and health data sheet

    Download

  • Questions and answers of the customers

    There are no questions yet. Be the first to ask a question about this product.

    Send me a notification for each new answer.
    1. Q How many sheets would a typical run of kitchen base units need?
      A

      It depends on the kitchen layout, but a standard run of six to eight base units, including sides, shelves and doors, often uses two to three full sheets once cutting waste is accounted for. Working out a full cutting list before ordering avoids running short partway through a project.
    2. Q Does this decor need any different fixings for wall-mounted units compared to floor-standing cabinets?
      A

      No, the same wall brackets, cam fittings and screws work for both. What matters more is making sure the wall fixings themselves are rated for the weight of the loaded unit, which depends on the wall type rather than the panel.
    3. Q Is standard cam and dowel furniture fitting compatible with this panel?
      A

      Yes. Standard cam and dowel fittings and concealed hinges work the same way as on any 18mm MFC panel. The main thing to watch is chipping at the drill exit point, so back the panel with scrap board or use a sharp, fine-tooth bit to keep the edge clean.
    4. Q Can this panel be joined edge to edge without the seam showing?
      A

      A butt joint will always show some line, since this is a solid colour rather than a pattern. Careful edge banding and tight, well aligned cuts keep it to a minimum, and using panels from the same batch helps avoid any visible colour shift at the joint.

Related products

  • Buy in Bulk & Save
    50-99 100+
    £12.05£14.46 £11.80£14.16
    9mm Chinese Eucalyptus Face Poplar Core External Grade Plywood B/BB CE2+ 2440 x 1220mm (8โ€ฒ X 4โ€ฒ)2440 x 1220 x 9mm Chinese Alpha Ply Eucalyptus Faced Poplar Core Hardwood Plywood B_BB Class 2-22440 x 1220 x 9mm Chinese Alpha Ply Eucalyptus Faced Poplar Core Hardwood Plywood B_BB Class 2-32440 x 1220 x 9mm Chinese Alpha Ply Eucalyptus Faced Poplar Core Hardwood Plywood B_BB Class 2-52440 x 1220 x 9mm Chinese Alpha Ply Eucalyptus Faced Poplar Core Hardwood Plywood B_BB Class 2-4

    9mm Chinese Eucalyptus Face Poplar Core External Grade Plywood B/BB CE2+ 2440 x 1220mm (8โ€ฒ X 4โ€ฒ)

    9mm Hardwood Eucalyptus faced structural plywood is used in permanent structures where the board is likely to be used in humid or interior conditions. This high-grade structural panel is less prone to bending and twisting and, with its excellent strength to weight ratio, makes it versatile and easy to handle.

    £12.55£15.06 Ex VATInc VAT Add to cart
  • Buy in Bulk & Save
    25-49 50+
    £28.64£34.37 £27.83£33.40
    18mm Premium Moisture Resistant MDF Board 2440 x 1220mm (8' x 4') FSCยฎ3050 x 1220 x 18mm Finsa Fibrapan H Forma Moisture Resistant MDF FSCยฎ-23050 x 1220 x 18mm Finsa Fibrapan H Forma Moisture Resistant MDF FSCยฎ-33050 x 1220 x 18mm Finsa Fibrapan H Forma Moisture Resistant MDF FSCยฎ-43050 x 1220 x 18mm Finsa Fibrapan H Forma Moisture Resistant MDF FSCยฎ-5

    18mm Premium Moisture Resistant MDF Board 2440 x 1220mm (8′ x 4′) FSCยฎ

    Moisture resistant MDF 18mm is particularly suitable for construction applications that need panels, with high load-bearing capacity and moisture resistance and for a wide range of interior applications.

    £29.45£35.34 Ex VATInc VAT Add to cart
  • Buy in Bulk & Save
    25-47 50+
    £24.61£29.53 £23.85£28.62
    18mm Premium MDF Board 2440 x 1220mm (8' x 4') FSCยฎIMG_9722IMG_9723IMG_0183IMG_0184

    18mm Premium MDF Board 2440 x 1220mm (8′ x 4′) FSCยฎ

    MDF 18mm is a composite panel product consisting of cellulosic fibres compressed with a synthetic resin or other ideal bonding system and joined together under extreme heat and pressure. For light carpentry projects, such as shelving and trim, 18mm MDF can be excellent.

    £25.37£30.44 Ex VATInc VAT Add to cart
  • 12mm P2 Furniture Grade Chipboard 2440 x 1220mm (8' x 4') FSCยฎ2440 x 1220 x 18mm Kronospan P2 Furniture Grade Chipboard FSCยฎ-22440 x 1220 x 18mm Kronospan P2 Furniture Grade Chipboard FSCยฎ-32440 x 1220 x 18mm Kronospan P2 Furniture Grade Chipboard FSCยฎ-52440 x 1220 x 18mm Kronospan P2 Furniture Grade Chipboard FSCยฎ2440 x 1220 x 18mm Kronospan P2 Furniture Grade Chipboard FSCยฎ-4

    12mm P2 Furniture Grade Chipboard 2440 x 1220mm (8′ x 4′) FSCยฎ

    12mm Furniture Grade Chipboard is a highly versatile and strong board used in making furniture as well as kitchen elements.

    POA Get a quote