19mm Egger U250 TM Caramel Beige Lacquered Melamine Faced Chipboard 2800 x 2070mm FSC®

Please note, the product may vary slightly in texture and colour from your screen.

SKU: SM8463
Brand: Egger

19mm Egger board MFC U250 TM Caramel Beige Lacquered is a creamy, richer beige tone. TM is Egger’s PerfectSense Matt lacquer, helping to keep fingerprints and light marks less visible. Rated by Egger for vertical applications only, such as cabinet fronts, wardrobe doors and wall panelling.

Colour: Caramel Beige
Show more
Finish: PerfectSense Matt lacquered
Show more
£132.25£158.70 Ex VATInc VAT

Available in 3-5 days

+-
Buy in Bulk & Save
Buy in Bulk & Save
12-23 24+
£128.28£153.94 £125.64£150.77
Lead Time: 3-5 days

The average delivery lead time for the majority of orders is 1-3 working days from the date of your order, however, it could extend to 5 working days on rare occasions or when you order products with extended lead times. Once the order has been placed, customers receive a text message and email confirmation, along with a tracking link, 24 hours before delivery. Only Palletline and Moffett customers are contacted directly by a member of staff. The next day delivery is available within M25 on orders placed on the day before 11AM, for other locations next day deliveries are available at the additional cost for orders placed before 11AM.

There is no Minimum order value, and we deliver nationwide:

  • Zone 1:
    Up to 1,000kg in weight – £50 ex VAT (Van delivery)
    1,000 – 24,000kg  – £125 ex VAT per load (Moffett delivery)
  • Zone 2:
    Up to 1,000kg in weight – £70 ex VAT (Van delivery)
    1,000kg and above in weight (up to 2,000kg) – £100 ex VAT (Palletline)
    1,000 – 24,000kg – £150 ex VAT per load (Moffett delivery)
  • Zone 3:
    Up to 1,000kg in weight – £90 ex VAT (Van delivery)
    1,000kg and above in weight (up to 2,000kg) – £100 ex VAT (Palletline)
    1,000 – 24,000kg – £250 ex VAT per load (Moffett delivery)
  • Zone 4:
    Custom delivery costs are calculated at checkout based on your postcode. (Palletline)
    6,000kg MAX weight for orders to zone 4.

Moffett note*
When ordering above the 24,000kg vehicle limit, you will be charged for separate Moffett delivery automatically. For example: You require a 30,000kg delivery to Zone 1: you will be charged £125 ex VAT x2, totalling £250 ex VAT for delivery.

Delivery map
+ -

If you are placing order for large sheets (10x5 or 10x4) to zone 4 you may encounter delivery restrictions, in this case - please click on the “Save & Share cart” button at the cart stage, select the email option and send it to [email protected] or call us on 0203 856 8578. We will get back with a delivery quote to you shortly.

See Full Transport Policy

19mm Egger board MFC U250 TM Caramel Beige Lacquered is a creamy, richer beige tone. TM is Egger’s PerfectSense Matt lacquer, helping to keep fingerprints and light marks less visible. Rated by Egger for vertical applications only, such as cabinet fronts, wardrobe doors and wall panelling.

  • Additional information

    Brand Egger
    Weight 70 kg
    Thickness

    19mm

    Size

    2800 x 2070mm

    Applications

    Cabinets, Closet systems, Furniture, Office, Shelving, Wall panelling

    Class

    Carb2

    Country of origin

    Germany

    Edging

    Square cut

    Features

    Anti-fingerprint, Cuttable

    Finish

    PerfectSense Matt lacquered

    Colour

    Caramel Beige

    Colour Tone

    Beige/Cream

    Fire rating

    Euroclass D-s2,d0

    Formaldehyde level

    E05

    Grade

    Chipboard

    Moisture resistant

    No

    Product standard

    Non structural

    Veneer

    Melamine

    Weather exposure

    Interior

    Surface finish

    Matt texture

  • Description

    19mm Egger U250 TM Caramel Beige Lacquered Melamine Faced Chipboard 2800 x 2070mm is manufactured in Germany by Egger, finished in the PerfectSense Matt lacquer range, part of the Beige Unicolours range within Egger’s wider Uni Colours collection.

    Colour and surface
    A step deeper than classic beige, Caramel Beige has a warm, inviting look that works well in tone-on-tone schemes with other neutrals. It also makes a soft accent next to warm-toned woodgrain decors or black surfaces. Under the PerfectSense lacquer, that warmth reads even calmer, the matt surface softening reflections rather than throwing them back. Fingerprints barely leave a trace here, the lacquer doing real work to keep the surface looking clean. The surface is tested for resistance to household liquids and chemicals under DIN 68861-1 and reaches class 1B. Wipe up spills such as tea, coffee and wine straight away.

    Construction and performance
    Melamine forms the base facing on both sides of this non-structural 19mm chipboard core, with the PerfectSense matt lacquer bonded on top of the visible face as the finished surface. Fire behaviour is classified D-s2,d0 under EN 13501-1, and the formaldehyde level meets E05. This TM lacquer is rated for vertical applications only and is not suitable for horizontal surfaces such as worktops, desking or shelving. The square cut edge takes banding cleanly, and the panel can be cut to size for bespoke work. It is intended for dry interior applications. It can be used for kitchen cabinets and furniture, but should not be installed where the board or exposed edges will be subject to persistent moisture, standing water or direct wetting.

    Where to use it
    19mm Egger board U250 TM Caramel Beige Lacquered MFC suits a range of interior fit-out work:

    • Kitchen cabinet fronts on a handleless design, where a wipe-clean surface matters most
    • Wardrobe doors in a warm, contemporary bedroom scheme
    • Office partition panels and vertical fittings in a warm, low-reflection fit-out
    • Media wall or TV console fronts in a contemporary living space
    • Bedroom storage unit fronts with a soft, elegant finish
    • Feature wall panelling in low-reflection, tone-on-tone schemes

    Caramel Beige also comes as a matching U250 TM ABS edging tape, unglued and supplied in 1mm thickness for hot melt edgebanding machines.

  • Datasheet

    Download
  • Questions and answers of the customers

    There are no questions yet. Be the first to ask a question about this product.

    Send me a notification for each new answer.
    1. Q Is the PerfectSense lacquer applied to both sides of the board?
      A

      No, the standard specification pairs the TM lacquered face with an ST7 reverse, so only one side carries the lacquer finish. This is worth confirming before planning open units or furniture where both faces remain visible.

    2. Q Does anti-fingerprint mean the surface never needs cleaning?
      A

      Not quite. What the lacquer does is cut down how visible fingerprints and light handling marks are, and it makes wiping the surface down that bit easier. Grease, food splashes and anything left to dry on will still need cleaning off in the usual way. 

    3. Q Can U250 TM be used for shelves, desks or other horizontal furniture parts?
      A

      No. Egger rates this TM lacquer for vertical applications only, so it is not intended for shelves, desks, worktops or other horizontal furniture parts.

    4. Q Does the lacquered finish affect how the panel expands or contracts with humidity changes?
      A

      Like any chipboard panel, it can move slightly as humidity changes, and with the lacquer on the front face only, the two sides are not finished the same way. To keep it stable, store the boards lying flat in a dry, closed building and let them settle to the room’s conditions before fitting.

    5. Q Is this decor suitable for a home office or study, not just kitchens and bedrooms?
      A

      Yes, for the vertical parts. It works well for cabinet fronts, cupboard doors and wall panelling in a home office or study. Desktops and shelves are horizontal surfaces, so they need a different board.

  • Why our customers stay with us

    Most of our orders come from customers who’ve bought before. Here’s why they keep coming back, drawn straight from their reviews.

    Customer service
    Expert advice from knowledgeable sheet material specialists
    Delivery speed
    Fast, reliable delivery nationwide
    Product range
    One of the UK's widest ranges of sheet materials in stock
    Wholesale prices
    Competitive trade pricing for all customers
    Trade credit
    Buy now, pay later option
    Sourcing
    FSC® certified products available across the range
    Click & Collect
    Click & Collect ready within 1 hour on stocked items
    Offloading services
    Choose van or Moffett offload to suit your site
    Open to business & public
    Anyone can order: trade and public alike, no account needed
    Rated excellent

    With thousands of successfully completed deliveries to building sites and our customers’ homes, we’re trusted to deliver the right product at the right price, on time, backed by a dedicated customer support team.

    We have 3 stores offering Bricks, Sheet Materials and Insulation, with access to 1000s of product lines.
    Across all three stores we’ve delivered 100,000+ orders to happy customers since 2019.