Our specialist stores
Our specialist stores
Standard Veneered MDF
Solid wood is beautiful. It is also heavy, expensive, and occasionally decides to warp overnight for no reason. Standard Veneered MDF keeps the part everyone actually sees the real wood surface, and replaces everything underneath with a dense, stable, predictable MDF core. No surprises. Just a clean, flat sheet ready to cut, route, and finish the way you planned.
What is standard veneered MDF?
Standard Veneered MDF is a sheet material with two layers. The base is a dense MDF core. On top sits a thin layer of real wood veneer, bonded to one or both faces. The core is made from compressed wood fibres and resin, uniform, smooth, and dimensionally stable. It does not warp or expand the way solid timber does, and it machines cleanly with saws, routers, and CNC equipment.
The veneer is a genuine slice of hardwood, typically around 0.5-0.6mm thick, pressed onto the core under heat and pressure. The result looks and feels like real wood on the surface, at a fraction of the cost of solid boards.
Most products use a crown cut, where the blade passes through the centre of the log and produces the classic arch or flame grain pattern. A quarter cut runs at a different angle to the growth rings and gives a tighter, straighter stripe across the surface.
The boards at Sheet Materials Wholesale range come from two manufacturers: Finsa and Decospan. Both are established European producers with consistent quality standards across their panel ranges.
On the technical side, all boards in this category are classified as non-structural interior panels. Most carry BS EN622-5 certification, the standard for MDF used in dry interior conditions in the UK. Some products also carry Carb2 certification. Boards are available in E1 and E05 formaldehyde emission levels, both safe for indoor use.
Unfinished boards have a raw veneer face. These are finished on site with oil, lacquer, stain, or wax. Veneer finish boards have been lightly prepared at the factory for a more consistent surface straight off the shelf. A small number of products come with a factory-applied lacquered surface, ready to install without further finishing work. All boards in this range accept varnish and stain, so the veneer takes standard wood finishing products without issue.
The edges on all products are square cut, meaning the MDF core is exposed. Matching wood veneer edging should be applied to any visible edges for a clean finished result.
Sheet sizes run from the standard 2440 x 1220mm (8 x 4) and the larger 3050 x 1220mm (10 x 4) through to 2400 x 1200mm on selected products. Thicknesses available from 4mm to 31mm, covering everything from thin overlay panels and door skins at the lower end to solid furniture carcassing and worktops at the heavier end.
What is standard veneered MDF used for?
Wardrobes, cabinets, shelving units, anywhere a flat panel needs to look like real wood. The stable core means panels stay flat after fitting. Shelving is another strong application.
In kitchens, Standard Veneered MDF is commonly used for door fronts and end panels. It takes lacquer cleanly and pairs well with matching edge wood veneer banding for a finished result. For the inside of base units near a sink or dishwasher, switch to moisture-resistant MDF for the carcass.
Wall panelling has become one of the bigger growth areas. Fit-out contractors and interior designers reach for it when working on full-height panelling and decorative accent walls. The material routes cleanly and holds detail well, which makes it a practical choice for more intricate panel work.
Thinner sheets at 4mm and 6mm are regularly used to face flush door blanks. This is a practical way to update existing doors or add a veneer face to new ones.
For home offices and workspaces, thicker boards at 18mm and above make solid, stable desktop surfaces. Heavier than chipboard alternatives and noticeably flatter over time.
Window boards, reveals, picture frames, cabinet inserts, decorative mouldings, the material works across all of these. Anywhere a clean, natural wood surface is needed on a flat component, it is a practical and cost-effective answer.
Finsa or Decospan: Which one to choose?
Both manufacturers produce Standard Veneered MDF panels to consistent European quality standards, but there are practical differences worth knowing before ordering.
Finsa is a Spanish producer. Veneer thickness on Finsa boards is 0.3mm. Finsa products in this range are available in Select grade and Natural grade. Select grade has less colour variation and wider veneer leaves, so boards from the same batch look more uniform. Natural grade shows more variation between leaves, which gives a less uniform but more characterful result. If consistency across a large run of panels matters, Select grade is the safer choice.
Decospan is a Belgian producer. Veneer thickness runs from 0.6mm upwards, noticeably thicker than Finsa. A thicker veneer gives more tolerance for sanding and finishing on site, and the surface is less likely to show through if the board is worked heavily. Decospan products in this range also include E05 emission level options for projects with strict air quality requirements.
In short: Finsa for a wider species selection and consistent batch matching. Decospan when a thicker veneer or lower formaldehyde emissions are the priority.
Benefits of standard veneered MDF
- Real wood surface without the cost or unpredictability of solid wood
- Stays flat and stable, panels do not warp or move after fitting
- Clean, consistent surface that takes lacquer, oil, and stain evenly
- Machines well with standard tools, routes without chipping when sharp tooling is used
- Holds screws and fixings through the full depth of the sheet
Why choose our standard veneered MDF
Thickness ranges from 4mm to 31mm, so the same range covers door skins, cabinet sides, shelving, desktops, and heavier furniture panels. There is no need to source thin overlay sheets separately from the heavier carcassing boards.
Matching veneer edge banding is stocked across all main species, so exposed edges can be finished without sourcing from elsewhere. Sheets are produced to consistent factory standards, which means a repeat order mid-project will match what arrived on day one.
The species range runs from almost white to near black. Maple and Ash sit at the pale end, clean and minimal. Oak and Cherry bring warmth and familiar grain character. Walnut, Sapele, and Teak move into richer, darker territory. Wenge is the darkest option, with tight, almost graphite grain that reads as bold in any setting.
Everything needed to complete a job, from the first sheet to the last edge, is available to buy online with fast UK delivery.
At Sheet Materials Wholesale, you can purchase Standard Veneered MDF at low wholesale prices with fast nationwide delivery for most of items within 1-3 working days across the UK. Next-day delivery is also available on most orders. Competitive rates guaranteed.
FAQ
What is the difference between crown cut and quarter cut veneer?
Both terms describe how the veneer was sliced from the log. Crown cut goes straight through the centre, which produces the arched or flame grain pattern that most people recognise as natural wood. Quarter cut runs at a right angle to the growth rings and gives a much tighter, straighter pattern. Crown cut is the standard across most products here.
What is Grade A/B, and does it matter which way the board faces?
It matters every time. Grade A is the face side, cut and selected for clean, consistent veneer with even colour and minimal joins. Grade B is the back. It is still real wood veneer but may show more variation, wider joins between leaves, or slight colour differences. For anything visible from both sides, check the product listing carefully before ordering.
Is standard veneered MDF fire rated?
No. Veneered or plain, it will burn and does not have a high-performing fire rating for regulated spaces. For any project where fire resistance is specified, fire retardant MDF is required. Standard veneered MDF is for interior domestic and non-regulated commercial use only.
Can standard veneered MDF be painted?
Yes, but painting covers the natural wood grain completely. Standard veneered MDF is normally finished with oil, lacquer, or wax to keep the real wood appearance visible. If the project requires a painted finish, plain or primed MDF is usually the better choice.
What thickness should I use for shelving?
18mm is what most joiners use as standard. For spans over 800mm or heavier loads, go 22mm. Anything thinner and you'll get flex over time, not worth the saving.
How do I finish the edges?
The veneer face looks great, but the MDF core will be exposed on cut edges, and that needs attention. The quickest option is iron-on veneer edging tape in the matching species. It is real wood veneer with glue already on the back. You line it up, run a dry iron over it on medium heat, let it cool, trim the overhang and give it a light sand.
Where to buy standard veneered MDF?
The full range is available to buy online at sheetmaterialswholesale.co.uk with fast UK delivery to the site or home.
Standard Veneered MDF Range
-
Buy in Bulk & Save
15-29 30+ £51.36£61.63 £50.30£60.36 
There are 2 more images4mm Oak Veneered MDF 2 Sides Crown Cut A/B Grade 2440 x 1220mm (8′ x 4′)
White oak MDF sheets 4mm glued to the wood surface increases the beauty and charm of the furniture that no other decorative panels can. The 4mm veneered MDF has “A” grade face with a “B” reverse that may show natural variation.
Veneered MDF (A/B) is made up of quality natural wood veneers bonded to premium MDF.
£52.95£63.54 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
15-29 30+ £57.33£68.80 £54.37£65.24 There are 2 more images6mm Oak Veneered MDF 2 Sides Crown Cut A/B Grade 2440 x 1220mm (8′ x 4′)
White oak MDF sheets 6mm glued to the wood surface increases the beauty and charm of the furniture that no other decorative panels can. The 6mm veneered MDF has “A” grade face with a “B” reverse that may show natural variation.
Veneered MDF (A/B) is made up of quality natural wood veneers bonded to premium MDF.
£59.10£70.92 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
15-29 30+ £75.18£90.22 £73.63£88.36 There are 2 more images6mm Oak Veneered MDF 2 Sides Crown Cut A/B Grade 3050 x 1220mm (10′ x 4′)
White oak MDF sheets 6mm 10×4 glued to the wood surface increases the beauty and charm of the furniture that no other decorative panels can. The 6mm veneered MDF has “A” grade face with a “B” reverse that may show natural variation.
Veneered MDF (A/B) is made up of quality natural wood veneers bonded to premium MDF.
£77.50£93.00 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
15-29 30+ £80.50£96.60 £78.23£93.88 
6mm Black Walnut Veneered MDF 2 Sides Crown Cut A/B 2440 x 1220mm (8′ x 4′)
The veneered MDF has been made with a thin layer of hardwood, bonded to standard MDF, producing a smooth and stable surface. Part of a range of veneers that are similar in quality to that of veneered Plywood, this full sheet of Black Walnut MDF is a stunning, darker hardwood that can be used for cabinets, furniture, decorative panel mouldings, bookshelves and more.
£82.78£99.34 Ex VATInc VAT Add to cart -
6mm Ash Veneered MDF 2 Sides Crown Cut A/B 2440 x 1220mm (8′ x 4′)
6mm Ash veneered MDF sheets offer a high standard of durability and are perfect for your furniture projects. Each 6mm veneered board can be used in multiple applications, ensuring a flawless finish from every angle. Whether used for cabinetry, shelving, or wardrobe, the natural grain patterns of Ash will be seen. 6mm Ash veneered MDF has “A” grade face with a “B” reverse that may show natural variation.
Original price was: £48.15 Ex VAT (£57.78 Inc VAT).£47.29£56.75Current price is: £47.29 Ex VAT (£56.75 Inc VAT). Ex VATInc VAT Add to cart -
Buy in Bulk & Save
15-29 30+ £48.45£58.14 £47.45£56.94 
6mm Pine Veneered MDF 2 Sides Crown Cut A/B Grade 2440 x 1220mm (8ā² x 4ā²)
Pine MDF sheets 6mm glued to the wood surface increase the beauty and charm of the furniture that no other decorative panels can. The 6mm pine veneered MDF has “A” grade face with a “B” reverse that may show natural variation.
Veneered MDF (A/B) is made up of quality natural wood veneers bonded to premium MDF
£49.95£59.94 Ex VATInc VAT Add to cart -
SaleBuy in Bulk & Save
15-29 30+ £52.95£63.54 £51.31£61.57 
6mm Sapele Veneered MDF 2 Sides Crown Cut A/B 2440 x 1220mm (8′ x 4′)
The veneered MDF has been made with a thin layer of hardwood, bonded to standard MDF, producing a smooth and stable surface. This full sheet of 6mm Sapele MDF is a stunning, light brown tone hardwood that can be used for cabinets, furniture, decorative panel mouldings, bookshelves and more.
Original price was: £56.28 Ex VAT (£67.54 Inc VAT).£54.59£65.51Current price is: £54.59 Ex VAT (£65.51 Inc VAT). Ex VATInc VAT Add to cart -
Buy in Bulk & Save
12-23 24+ £61.09£73.31 £58.51£70.21 
There are 2 more images10mm Oak Veneered MDF 2 Sides Crown Cut A/B Grade 2440 x 1220mm (8′ x 4′)
White oak MDF sheets 10mm glued to the wood surface increases the beauty and charm of the furniture that no other decorative panels can. The 10mm veneered MDF has “A” grade face with a “B” reverse that may show natural variation.
Veneered MDF (A/B) is made up of quality natural wood veneers bonded to premium MDF.
£64.30£77.16 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
12-23 24+ £81.08£97.30 £75.23£90.28 
There are 1 more images10mm Black Walnut Veneered MDF 2 Sides Crown Cut A/B 2440 x 1220mm (8′ x 4′)
The 10mm veneered MDF has been made with a thin layer of hardwood, bonded to standard MDF, producing a smooth and stable surface. Part of a range of veneers that are similar in quality to that of veneered Plywood, this full sheet of 10mm Black Walnut MDF is a stunning, darker hardwood that can be used for cabinets, furniture, decorative panel mouldings, bookshelves and more.
£83.59£100.31 Ex VATInc VAT Add to cart -
10mm Ash Veneered MDF 2 Sides Crown Cut A/B 2440 x 1220mm (8′ x 4′)
10mm Ash veneered MDF sheets offer a high standard of durability and are perfect for your furniture projects. Each 10mm veneered board can be used in multiple applications, ensuring a flawless finish from every angle. Whether used for cabinetry, shelving, or wardrobe, the natural grain patterns of Ash will be seen. With a high-quality reverse ash veneer, these sheets have “A” grade face with a “B” reverse that may show natural variation.
Original price was: £54.05 Ex VAT (£64.86 Inc VAT).£52.85£63.42Current price is: £52.85 Ex VAT (£63.42 Inc VAT). Ex VATInc VAT Add to cart -
Buy in Bulk & Save
12-23 24+ £50.00£60.00 £48.97£58.76 10mm Pine Veneered MDF 2 Sides Crown Cut A/B Grade 2440 x 1220mm (8ā² x 4ā²)
Pine MDF sheets 10mm glued to the wood surface increase the beauty and charm of the furniture that no other decorative panels can. The 10mm pine veneered MDF has “A” grade face with a “B” reverse that may show natural variation.
Veneered MDF (A/B) is made up of quality natural wood veneers bonded to premium MDF
£51.55£61.86 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
12-23 24+ £67.00£80.40 £62.81£75.37 
There are 2 more images13mm Oak Veneered MDF 2 Sides Crown Cut A/B Grade 2440 x 1220mm (8′ x 4′)
White oak MDF sheets 13mm glued to the wood surface increases the beauty and charm of the furniture that no other decorative panels can. The 13mm veneered MDF has “A” grade face with a “B” reverse that may show natural variation.
Veneered MDF (A/B) is made up of quality natural wood veneers bonded to premium MDF.
£69.79£83.75 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
12-23 24+ £87.63£105.16 £85.82£102.98 There are 2 more images13mm Oak Veneered MDF 2 Sides Crown Cut A/B Grade 3050 x 1220mm (10′ x 4′)
White oak MDF sheets 13mm 10×4 glued to the wood surface increases the beauty and charm of the furniture that no other decorative panels can. The 13mm veneered MDF has “A” grade face with a “B” reverse that may show natural variation.
Veneered MDF (A/B) is made up of quality natural wood veneers bonded to premium MDF.
£90.34£108.41 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
12-23 24+ £84.38£101.26 £78.29£93.95 
13mm Black Walnut Veneered MDF 2 Sides Crown Cut A/B 2440 x 1220mm (8′ x 4′)
The 13mm veneered MDF has been made with a thin layer of hardwood, bonded to standard MDF, producing a smooth and stable surface. Part of a range of veneers that are similar in quality to that of veneered Plywood, this full sheet of 13mm Black Walnut MDF is a stunning, darker hardwood that can be used for cabinets, furniture, decorative panel mouldings, bookshelves and more.
£86.99£104.39 Ex VATInc VAT Add to cart -
SaleBuy in Bulk & Save
12-24 25+ £52.87£63.44 £50.09£60.11 
13mm Ash Veneered MDF 2 Sides Crown Cut A/B 2440 x 1220mm (8′ x 4′)
13mm Ash veneered MDF sheets offer a high standard of durability and are perfect for your furniture projects. Each 13mm veneered board can be used in multiple applications, ensuring a flawless finish from every angle. Whether used for cabinetry, shelving, or wardrobe, the natural grain patterns of Ash will be seen. With a high-quality ash veneer the sheet has “A” grade face with a “B” reverse that may show natural variation.
Original price was: £56.60 Ex VAT (£67.92 Inc VAT).£55.65£66.78Current price is: £55.65 Ex VAT (£66.78 Inc VAT). Ex VATInc VAT Add to cart -
Buy in Bulk & Save
12-23 24+ £54.81£65.77 £53.68£64.42 13mm Pine Veneered MDF 2 Sides Crown Cut A/B Grade 2440 x 1220mm (8ā² x 4ā²)
Pine MDF sheets 13mm glued to the wood surface increase the beauty and charm of the furniture that no other decorative panels can. The 13mm pine veneered MDF has “A” grade face with a “B” reverse that may show natural variation.
Veneered MDF (A/B) is made up of quality natural wood veneers bonded to premium MDF
£56.50£67.80 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
12-23 24+ £61.27£73.52 £60.01£72.01 13mm Sapele Veneered MDF 2 Sides Crown Cut A/B 2440 x 1220mm (8′ x 4′)
13mm Sapele veneered MDF has been made with a thin layer of hardwood, bonded to standard MDF, producing a smooth and stable surface. This full sheet of 13mm Sapele MDF is a stunning, light brown tone hardwood that can be used for cabinets, furniture, decorative panel mouldings, bookshelves and more.
£63.17£75.80 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
12-23 24+ £68.55£82.26 £67.14£80.57 There are 2 more images16mm Oak Veneered MDF 2 Sides Crown Cut A/B Grade 2440 x 1220mm (8′ x 4′)
White oak MDF sheets 16mm glued to the wood surface increases the beauty and charm of the furniture that no other decorative panels can. The 16mm veneered MDF has “A” grade face with a “B” reverse that may show natural variation.
Veneered MDF (A/B) is made up of quality natural wood veneers bonded to premium MDF.
£70.67£84.80 Ex VATInc VAT Add to cart -
19mm Oak Veneered MDF 2 Sides Crown Cut A/B Grade 2440 x 1220mm (8′ x 4′)
White oak MDF sheets 19mm glued to the wood surface increases the beauty and charm of the furniture that no other decorative panels can. The 19mm veneered MDF has “A” grade face with a “B” reverse that may show natural variation.
Veneered MDF (A/B) is made up of quality natural wood veneers bonded to premium MDF.
Original price was: £72.65 Ex VAT (£87.18 Inc VAT).£67.78£81.34Current price is: £67.78 Ex VAT (£81.34 Inc VAT). Ex VATInc VAT Add to cart -
SaleBuy in Bulk & Save
25-49 50+ £84.50£101.40 £80.06£96.07 
19mm Lacquered Oak Veneered MDF 2 Sides Crown Cut A/B Grade 2440 x 1220mm (8′ x 4′)
Lacquered White oak MDF sheets 19mm glued to the wood surface increases the beauty and charm of the furniture that no other decorative panels can. The 19mm lacquered veneered MDF has “A” grade face with a “B” reverse that may show natural variation.
Original price was: £91.95 Ex VAT (£110.34 Inc VAT).£88.95£106.74Current price is: £88.95 Ex VAT (£106.74 Inc VAT). Ex VATInc VAT Add to cart -
19mm Oak Veneered MDF 2 Sides Crown Cut A/B Grade 3050 x 1220mm (10′ x 4′)
White oak MDF sheets 19mm glued to the wood surface increases the beauty and charm of the furniture that no other decorative panels can. The 19mm veneered MDF has “A” grade face with a “B” reverse that may show natural variation.
Veneered MDF (A/B) is made up of quality natural wood veneers bonded to premium MDF.
Original price was: £95.19 Ex VAT (£114.23 Inc VAT).£92.69£111.23Current price is: £92.69 Ex VAT (£111.23 Inc VAT). Ex VATInc VAT Add to cart -
Buy in Bulk & Save
12-23 24+ £95.95£115.14 £89.03£106.84 
There are 1 more images19mm Oak Veneered MDF 2 Sides Crown Cut A/B Select Grade 2440 x 1220mm (8′ x 4′)
White oak MDF Finsa sheets 19mm glued to the wood surface increases the beauty and charm of the furniture that no other decorative panels can. The board is 035 Select grade meaning it has; Less colour variation, less natural defects and wider leafs. You may expect multiple boards to be more similar looking than with natural grade. The 19mm veneered MDF has “A” grade face with a “B” reverse that may show natural variation.
Veneered MDF (A/B) is made up of quality natural wood veneers bonded to premium MDF.
£98.92£118.70 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
12-23 24+ £72.60£87.12 £70.73£84.88 
There are 1 more images19mm Oak Veneered MDF 2 Sides Quarter Cut A/B Natural Grade 2440 x 1220mm (8′ x 4′)
White oak MDF Finsa sheets 19mm glued to the wood surface increases the beauty and charm of the furniture that no other decorative panels can. The board is 036 natural grade meaning it has; some colour variation, natural defects and narrower leafs. You may expect multiple boards to be different from each other a little more than how they come with select grade. The 19mm veneered MDF has “A” grade face with a “B” reverse that may show natural variation.
Veneered MDF (A/B) is made up of quality natural wood veneers bonded to premium MDF.
£74.85£89.82 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
12-23 24+ £96.16£115.39 £92.19£110.63 
There are 1 more images19mm Black Walnut Veneered MDF 2 Sides Crown Cut A/B 2440 x 1220mm (8′ x 4′)
The veneered MDF has been made with a thin layer of hardwood, bonded to standard MDF, producing a smooth and stable surface. Part of a range of veneers that are similar in quality to that of veneered Plywood, this full sheet of Black Walnut MDF is a stunning, darker hardwood that can be used for cabinets, furniture, decorative panel mouldings, bookshelves and more.
£99.13£118.96 Ex VATInc VAT Add to cart -
SaleBuy in Bulk & Save
13-24 25+ £136.66£163.99 £129.47£155.36 
19mm Black Walnut Veneered MDF 2 Sides Crown Cut A/B Select Grade 3050 x 1220mm (10′ x 4′)
Walnut MDF sheets 19mm 10×4 size glued to the wood surface increases the beauty and charm of the furniture that no other decorative panels can. The 19mm veneered MDF has “A” grade face with a “B” reverse that may show natural variation.
Veneered MDF (A/B) is made up of quality natural wood veneers bonded to premium MDF.
Original price was: £154.65 Ex VAT (£185.58 Inc VAT).£143.85£172.62Current price is: £143.85 Ex VAT (£172.62 Inc VAT). Ex VATInc VAT Add to cart -
Buy in Bulk & Save
12-23 24+ £60.90£73.08 £57.69£69.23 There are 1 more images19mm Ash Veneered MDF 2 Sides Crown Cut A/B 2440 x 1220mm (8′ x 4′)
19mm Ash veneered MDF sheets offer a high standard of durability and are perfect for your furniture projects. Each 19mm veneered board can be used in multiple applications, ensuring a flawless finish from every angle. Whether used for cabinetry, shelving, or wardrobe, the natural grain patterns of Ash will be seen. Ash Veneered MDF has “A” grade face with a “B” reverse that may show natural variation.
£64.10£76.92 Ex VATInc VAT Add to cart -
19mm Ash Veneered MDF 2 Sides Crown Cut A/B Natural Grade 3050 x 1220mm (10ā² x 4ā²)
19mm Ash veneered MDF sheets offer a high standard of durability and are perfect for your furniture projects. Each 19mm veneered board can be used in multiple applications, ensuring a flawless finish from every angle. Whether used for cabinetry, shelving, or wardrobe, the natural grain patterns of Ash will be seen. Ash veneer MDF has “A” grade face with a “B” reverse that may show natural variation.
Original price was: £82.15 Ex VAT (£98.58 Inc VAT).£78.50£94.20Current price is: £78.50 Ex VAT (£94.20 Inc VAT). Ex VATInc VAT Add to cart -
Buy in Bulk & Save
12-23 24+ £76.81£92.17 £72.77£87.32 
There are 1 more images19mm Maple Veneered MDF 2 Sides Crown Cut A/B Grade 2440 x 1220mm (8′ x 4′)
Maple MDF sheets 19mm glued to the wood surface increase the beauty and charm of the furniture that no other decorative panels can. The 19mm maple veneered MDF has “A” grade face with a “B” reverse that may show natural variation.
Veneered MDF (A/B) is made up of quality natural wood veneers bonded to premium MDF.
£80.85£97.02 Ex VATInc VAT Add to cart -
SaleBuy in Bulk & Save
12-23 24+ £64.13£76.96 £60.75£72.90 19mm Pine Veneered MDF 2 Sides Crown Cut A/B Grade 2440 x 1220mm (8′ x 4′)
Pine MDF sheets 19mm glued to the wood surface increase the beauty and charm of the furniture that no other decorative panels can. The 19mm pine veneered MDF has “A” grade face with a “B” reverse that may show natural variation.
Veneered MDF (A/B) is made up of quality natural wood veneers bonded to premium MDF.
Original price was: £68.25 Ex VAT (£81.90 Inc VAT).£67.50£81.00Current price is: £67.50 Ex VAT (£81.00 Inc VAT). Ex VATInc VAT Add to cart -
Buy in Bulk & Save
12-23 24+ £74.10£88.92 £70.98£85.18 
There are 2 more images19mm Cherry Veneered MDF 2 Sides Crown Cut A/B 2440 x 1220mm (8′ x 4′)
The veneered MDF has been made with a thin layer of hardwood, bonded to standard MDF, producing a smooth and stable surface. Part of a range of veneers that are similar in quality to that of veneered Plywood, this full sheet of Cherry MDF is a stunning, pinkish hardwood that can be used for cabinets, furniture, decorative panel mouldings, bookshelves and more.
£78.00£93.60 Ex VATInc VAT Add to cart -
19mm White Beech Veneered MDF 2 Sides Crown Cut A/B Grade 2440 x 1220mm (8′ x 4′)
White Beech MDF sheets 19mm glued to the wood surface increase the beauty and charm of the furniture that no other decorative panels can. The 19mm White Beech veneered MDF has “A” grade face with a “B” reverse that may show natural variation.
Veneered MDF (A/B) is made up of quality natural wood veneers bonded to premium MDF.
Original price was: £70.45 Ex VAT (£84.54 Inc VAT).£68.50£82.20Current price is: £68.50 Ex VAT (£82.20 Inc VAT). Ex VATInc VAT Add to cart -
SaleBuy in Bulk & Save
12-23 24+ £56.10£67.32 £54.95£65.94 
19mm Steamed Beech Veneered MDF 2 Sides Crown Cut A/B Grade 2440 x 1220mm (8′ x 4′)
Steamed Beech MDF sheets 19mm glued to the wood surface increase the beauty and charm of the furniture that no other decorative panels can. The 19mm Steamed Beech veneered MDF has “A” grade face with a “B” reverse that may show natural variation.
Veneered MDF (A/B) is made up of quality natural wood veneers bonded to premium MDF.
Original price was: £59.95 Ex VAT (£71.94 Inc VAT).£57.84£69.41Current price is: £57.84 Ex VAT (£69.41 Inc VAT). Ex VATInc VAT Add to cart -
Buy in Bulk & Save
12-23 24+ £67.85£81.42 £66.45£79.74 19mm Sapele Veneered MDF 2 Sides Crown Cut A/B 2440 x 1220mm (8′ x 4′)
19mm Sapele veneered MDF has been made with a thin layer of hardwood, bonded to standard MDF, producing a smooth and stable surface. This full sheet of 19mm Sapele MDF is a stunning, light brown tone hardwood that can be used for cabinets, furniture, decorative panel mouldings, bookshelves and more.
£69.95£83.94 Ex VATInc VAT Add to cart -
Buy in Bulk & Save
12-23 24+ £88.89£106.67 £87.06£104.47 19mm Sapele Veneered MDF 2 Sides Crown Cut A/B 3050 x 1220mm (10′ x 4′)
19mm 10×4 Sapele veneered MDF has been made with a thin layer of hardwood, bonded to standard MDF, producing a smooth and stable surface. This full sheet of 19mm 10×4 Sapele MDF is a stunning, light brown tone hardwood that can be used for cabinets, furniture, decorative panel mouldings, bookshelves and more.
£91.64£109.97 Ex VATInc VAT Add to cart -
23mm Oak Veneered MDF 2 Sides Crown Cut A/B Grade 2440 x 1220mm (8′ x 4′)
White oak MDF sheets 23mm glued to the wood surface increases the beauty and charm of the furniture that no other decorative panels can. The 23mm veneered MDF has “A” grade face with a “B” reverse that may show natural variation.
Veneered MDF (A/B) is made up of quality natural wood veneers bonded to premium MDF.
Original price was: £114.45 Ex VAT (£137.34 Inc VAT).£107.95£129.54Current price is: £107.95 Ex VAT (£129.54 Inc VAT). Ex VATInc VAT Add to cart -
26mm Oak Veneered MDF 2 Sides Crown Cut A/B Grade 2440 x 1220mm (8′ x 4′)
White oak MDF sheets 26mm glued to the wood surface increases the beauty and charm of the furniture that no other decorative panels can. The 26mm veneered MDF has “A” grade face with a “B” reverse that may show natural variation.
Veneered MDF (A/B) is made up of quality natural wood veneers bonded to premium MDF.
Original price was: £101.19 Ex VAT (£121.43 Inc VAT).£96.85£116.22Current price is: £96.85 Ex VAT (£116.22 Inc VAT). Ex VATInc VAT Add to cart
