If you are not already familiar with melamine faced chipboard, often called MFC or Conti-board, you might be surprised by how common it is around you. It is a popular choice for furniture, cabinetry, shelving, wardrobes, and joinery tasks in the UK, owing to its affordability and good performance.
Melamine faced chipboard is a composite board made by bonding wood particles with resin and overlaying one or both sides with a melamine-impregnated decorative paper.
The overlay is cured under heat and pressure to give it durability and a smooth finish. It’s worth noting that the melamine surface is more durable than veneer and can come in pre-finished colours or wood grain patterns.
Here are some common applications and general uses for MFC:
Because it is easy to clean and pre-finished, MFC is ideal for kitchen carcass panels, shelves, and units.
MFC chipboard is utilised to construct shelves since it can be cut to any size and faced with different shades. Besides, you can edge your Conti-chipboard with either complementing or contrasting coloured edging tape to match any interior design.
MFC allows builders to create a seamless and personalised bedroom wardrobe without breaking the bank!
Because melamine-faced chipboard is light, decorative, and stable, it is often used for interior linings, such as in canal boats or caravans
There are various advantages of MFC chipboard. They include.
Note: While the Conti-board (face) chipboard is waterproof, if water penetrates the chipboard underneath, the dampness could distort melamine. Similarly, while melamine chipboard is robust and long-lasting, if the installation was done improperly so that the MFC chipboard damages the particleboard, the melamine could chip.
We offer a wide selection of melamine faced chipboard boards in various finishes (smooth, white, wood-effect etc.), sizes, and thicknesses.
Our boards are FSC® certified, where stated, giving assurance of responsibly sourced wood. You can also get trade prices and bulk discounts for affordable options that don’t compromise your construction.
We also offer edging tape to match or contrast with your boards and for proper edge finishing.
Get durable, decorative, and affordable board solutions in our melamine faced chipboard range. We have it in different styles, finishes, and thicknesses. Order today for a quick UK delivery.
Yes, it is possible to paint melamine faced chipboard even with the slick surface. However, this requires preparation of the surface with a high quality bonding primer to ensure the paint sticks. You should also clean and lightly sand it to dull the sheen and create a surface for the primer to adhere.
The process is simple and breaks down as follows:
Clean up the edge with a sander, router, or planer to ensure it doesn’t start chipping due to irregular edges.
MFC is more moisture resistant than other finished chipboard products due to the melamine overlay. However, if moisture makes it into the chipboard core through unbanded/exposed edges, it can cause swelling, distortion from internal stress, and chipping.
Melamine doesn’t peel off like paint since the resin hardens and keeps its structure over time. It can bend or warp from the chipboard swelling or from heavy loads, but it does not peel off by itself without some stress or exposure to harsh conditions over long periods.
15mm Non-textured smooth white chipboard in white provides extreme support for items around the home.
18mm Non-textured smooth white chipboard in white provides extreme support for items around the home.
| 14-27 | 28+ |
| £72.79£87.35 | £71.29£85.55 |
Available in 3-5 days

18mm EGGER W980 ST7 Platinum White is a melamine faced chipboard (MFC) panel with a smooth, durable melamine finish on both sides. Ideal for furniture, cabinets and interior fit out projects.
| 14-27 | 28+ |
| £72.79£87.35 | £71.29£85.55 |
Available in 3-5 days

18mm EGGER W980 SM Platinum White is a melamine faced chipboard (MFC) panel with a smooth, durable melamine finish on both sides. Ideal for furniture, cabinets and interior fit out projects.
| 14-27 | 28+ |
| £77.70£93.24 | £76.10£91.32 |
Available in 3-5 days

18mm EGGER U104 ST9 Alabaster White is a melamine faced chipboard (MFC) panel with a smooth, durable melamine finish on both sides. Ideal for furniture, cabinets and interior fit out projects.
| 14-27 | 28+ |
| £77.70£93.24 | £76.10£91.32 |
Available in 3-5 days

18mm Egger board MFC U156 ST9 Sand Beige carries a warm, red-toned beige. ST9 is Egger’s Smoothtouch Matt texture, giving the surface a soft, even matt feel. Suits kitchen cabinet fronts, wardrobe doors and office storage wanting a warm, neutral base.
| 14-27 | 28+ |
| £77.70£93.24 | £76.10£91.32 |
Available in 3-5 days

18mm Egger board MFC U216 ST9 Came Beige is a light beige with a soft grey cast. ST9 is Egger’s Smoothtouch Matt texture, giving the surface a smooth, low-key matt look. Suits kitchen cabinet fronts, wardrobe doors and shelving that call for a calm, light base.
| 14-27 | 28+ |
| £77.70£93.24 | £76.10£91.32 |
Available in 3-5 days

18mm Egger board MFC U222 ST9 Crema Beige is one of Egger’s most popular kitchen colours, sometimes referred to as Magnolia. Warm and neutral, it combines with almost any wood tone for a cosy, classic feel. ST9 is Egger’s Smoothtouch Matt texture, keeping the surface soft to the touch. Suited to kitchen cabinet fronts and units.
| 14-27 | 28+ |
| £77.70£93.24 | £76.10£91.32 |
Available in 3-5 days

18mm Egger board MFC U708 ST9 Light Grey is a neutral grey that works as an all-rounder for neutral surfaces. It combines tone-on-tone with other greys, or as a clean contrast against natural woodgrains. ST9 is Egger’s Smoothtouch Matt texture, giving the surface a matt, velvety, even feel. Suits kitchen cabinet fronts and furniture wanting a versatile neutral base.
| 14-27 | 28+ |
| £77.70£93.24 | £76.10£91.32 |
Available in 3-5 days

18mm Egger board MFC U732 ST9 Dust Grey is a medium, cool grey with genuine neutrality. Its versatility suits offices and a wide range of other applications. ST9 is Egger’s Smoothtouch Matt texture, supporting that timeless, neutral character in both look and feel. Suits kitchen cabinet fronts and furniture wanting a dependable grey base.
| 14-27 | 28+ |
| £82.37£98.84 | £80.67£96.80 |
Available in 3-5 days

18mm Egger board MFC U115 ST9 Carat Beige carries warm grey undertones that keep it neutral rather than sandy, and looks particularly modern when paired with black. ST9 gives the surface a soft matt feel. Suits kitchen cabinet fronts and furniture where a beige and black palette is wanted.
| 14-27 | 28+ |
| £82.37£98.84 | £80.67£96.80 |
Available in 3-5 days

18mm Egger board MFC U201 ST9 Pebble Grey is an on-trend taupe tone, warm against cool greys and grey against beige or brown. It combines well with many woodgrain and material decorations. ST9 is Egger’s Smoothtouch Matt texture, giving all solid colours a modern matt look and feel. Suits kitchen cabinet fronts and furniture wanting a flexible, contemporary tone.
| 14-27 | 28+ |
| £82.37£98.84 | £80.67£96.80 |
Available in 3-5 days

18mm Egger board MFC U211 ST9 Almond Beige carries a subtle reddish warmth. It reads understated, not colourful. ST9 is Egger’s Smoothtouch Matt texture, giving the surface a soft, velvety matt feel. Suits kitchen cabinet fronts and office furniture in warm, contemporary schemes.
| 14-27 | 28+ |
| £82.37£98.84 | £80.67£96.80 |
Available in 3-5 days

18mm Egger board MFC U540 ST9 Denim Blue is a muted grey-blue that pairs naturally with grey-toned woodgrains. It also works well with white or pale timber for a cooler, lighter look. ST9 gives the surface a soft matt feel. Suits kitchen cabinet fronts and wardrobe doors in modern, Scandinavian-style schemes.
| 14-27 | 28+ |
| £82.37£98.84 | £80.67£96.80 |
Available in 3-5 days

18mm Egger board MFC U599 ST9 Indigo Blue is an almost-black blue, part of Egger’s Nearly Black family. It creates an elegant contrast against dark brown woodgrains like walnut. ST9 gives the surface a natural matt feel. Suits living room furniture and cabinet fronts wanting a cool, understated depth.
| 14-27 | 28+ |
| £82.37£98.84 | £80.67£96.80 |
Available in 3-5 days

18mm EGGER U335 ST9 Rusty Red is a melamine faced chipboard (MFC) panel with a smooth, durable melamine finish on both sides. Ideal for furniture, cabinets and interior fit out projects.
| 14-27 | 28+ |
| £82.37£98.84 | £80.67£96.80 |
Available in 3-5 days

18mm Egger board MFC U502 ST9 Misty Blue is an intense, muted blue, not too colourful. It works well as a deliberate accent colour. ST9 gives the surface a soft matt feel. Suits kitchen cabinet fronts and furniture wanting a fresh, calming tone.
| 14-27 | 28+ |
| £82.37£98.84 | £80.67£96.80 |
Available in 3-5 days

18mm Egger board MFC U604 ST9 Reed Green is a muted green with a grey cast, restrained rather than bright. ST9 is Egger’s Smoothtouch Matt texture, a smooth surface with a matt finish. Suits kitchen cabinet fronts and furniture wanting a natural green tone.
| 14-27 | 28+ |
| £82.37£98.84 | £80.67£96.80 |
Available in 3-5 days

18mm Egger board MFC U636 ST9 Fjord Green is a light green with a high blue content, reserved rather than bold. It combines well with many woodgrain and material decors. ST9 is Egger’s Smoothtouch Matt texture, giving the surface a modern matt look and feel. Suits large cabinet runs and feature walls without feeling dominant.
| 14-27 | 28+ |
| £82.37£98.84 | £80.67£96.80 |
Available in 3-5 days

18mm Egger board MFC U638 ST9 Sage Green is a warm, greyish green, muted rather than bright. It looks natural and elegant against medium to dark brown woodgrains. ST9 is Egger’s Smoothtouch Matt texture, giving the surface a modern matt look and feel. Suits kitchen cabinet fronts and furniture wanting a calming, natural tone.
| 14-27 | 28+ |
| £82.37£98.84 | £80.67£96.80 |
Available in 3-5 days

18mm Egger board MFC U699 ST9 Fir Green is a very dark, deep green with real richness, close enough to black to work as a near-black colour in its own right. ST9 is Egger’s Smoothtouch Matt texture, giving the surface a velvety, matt look and feel. Suits statement cabinet fronts and furniture wanting a rich, dark tone.
| 14-27 | 28+ |
| £82.37£98.84 | £80.67£96.80 |
Available in 3-5 days

18mm Egger board MFC U702 ST9 Cashmere Grey is a versatile all-rounder, bringing warmth or absolute neutrality depending on the scheme. Its slightly reddish grey nuance pairs naturally with equally reddish wood tones. ST9 is Egger’s Smoothtouch Matt texture, supporting that timeless, neutral character. Suits kitchen cabinet fronts and furniture wanting a warm, versatile grey.
| 14-27 | 28+ |
| £82.37£98.84 | £80.67£96.80 |
Available in 3-5 days

18mm EGGER U705 ST9 Angora Grey is a melamine faced chipboard (MFC) panel with a smooth, durable melamine finish on both sides. Ideal for furniture, cabinets and interior fit out projects.
| 14-27 | 28+ |
| £82.37£98.84 | £80.67£96.80 |
Available in 3-5 days

18mm EGGER U707 ST9 Silk Grey is a melamine faced chipboard (MFC) panel with a smooth, durable melamine finish on both sides. Ideal for furniture, cabinets and interior fit out projects.
| 14-27 | 28+ |
| £82.37£98.84 | £80.67£96.80 |
Available in 3-5 days

18mm EGGER U727 ST9 Stone Grey is a melamine faced chipboard (MFC) panel with a smooth, durable melamine finish on both sides. Ideal for furniture, cabinets and interior fit out projects.
| 14-27 | 28+ |
| £82.37£98.84 | £80.67£96.80 |
Available in 3-5 days

18mm EGGER U740 ST9 Dark Taupe is a melamine faced chipboard (MFC) panel with a smooth, durable melamine finish on both sides. Ideal for furniture, cabinets and interior fit out projects.
| 14-27 | 28+ |
| £82.37£98.84 | £80.67£96.80 |
Available in 3-5 days

18mm Egger board MFC U741 ST9 Lava Grey carries a warm, reddish grey tone that sits close to many modern woodgrains. It pairs naturally rather than clashing. ST9 finishes the surface with a soft, velvety matt hand. Suits kitchen and bedroom furniture where that warmth matters most.
| 14-27 | 28+ |
| £82.37£98.84 | £80.67£96.80 |
Available in 3-5 days

18mm Egger board MFC U748 ST9 Truffle Brown creates a warm contrast against light woodgrains, muted rather than flat or dark. ST9 gives the surface a soft matt hand. Suits living room and bedroom furniture paired with pale timber.
| 14-27 | 28+ |
| £82.37£98.84 | £80.67£96.80 |
Available in 3-5 days

18mm EGGER U750 ST9 Taupe Grey is a melamine faced chipboard (MFC) panel with a smooth, durable melamine finish on both sides. Ideal for furniture, cabinets and interior fit out projects.
| 14-27 | 28+ |
| £82.37£98.84 | £80.67£96.80 |
Available in 3-5 days

18mm EGGER U763 ST9 Pearl Grey is a melamine faced chipboard (MFC) panel with a smooth, durable melamine finish on both sides. Ideal for furniture, cabinets and interior fit out projects.
| 14-27 | 28+ |
| £82.37£98.84 | £80.67£96.80 |
Available in 3-5 days

18mm EGGER U767 ST9 Cubanit Grey is a melamine faced chipboard (MFC) panel with a smooth, durable melamine finish on both sides. Ideal for furniture, cabinets and interior fit out projects.
| 14-27 | 28+ |
| £82.37£98.84 | £80.67£96.80 |
Available in 3-5 days

18mm EGGER U775 ST9 White Grey is a melamine faced chipboard (MFC) panel with a smooth, durable melamine finish on both sides. Ideal for furniture, cabinets and interior fit out projects.
| 14-27 | 28+ |
| £82.37£98.84 | £80.67£96.80 |
Available in 3-5 days

18mm EGGER U780 ST9 Monument Grey is a melamine faced chipboard (MFC) panel with a smooth, durable melamine finish on both sides. Ideal for furniture, cabinets and interior fit out projects.
| 14-27 | 28+ |
| £82.37£98.84 | £80.67£96.80 |
Available in 3-5 days

18mm EGGER U788 ST9 Arctic Grey is a melamine faced chipboard (MFC) panel with a smooth, durable melamine finish on both sides. Ideal for furniture, cabinets and interior fit out projects.
| 14-27 | 28+ |
| £82.37£98.84 | £80.67£96.80 |
Available in 3-5 days

18mm Egger board MFC U899 ST9 Soft Black is a warm, brown-toned near-black, not a flat, true black. ST9 is Egger’s Smoothtouch Matt texture, giving the surface a soft, velvety matt feel. Suits living room furniture and cabinet fronts wanting elegant, understated depth.
| 14-27 | 28+ |
| £82.37£98.84 | £80.67£96.80 |
Available in 3-5 days

18mm Egger board MFC U960 ST9 Onyx Grey reads closer to poured concrete than a standard flat grey. It combines well with the grey veining found in white marble surfaces. ST9 gives the surface a velvety, matt feel. Suits kitchen cabinet fronts paired with marble-effect worktops.